DVD Burner Stops Burning

[Shoeless]

Please Help !!!

The problem I'm having is that I can decrypt a DVD, yet when I try to burn using Shrink, either opening the disk or using the backup on my c: drive, it goes through the encoding process fine. Then it will start to burn, it will burn anywhere from 10% to 80% of the DVD and then stop. I do not get an error message, and the computer does not freeze up, I can open other programs if I choose, the process just stops. I have uninstalled "Shrink" a few times with no avail.

Does anyone else have this problem?

Thanks.

[setarip]

Which program is DVD Shrink using to burn the DVD, NERO or DVD Decrypter?

[blutach]

If DVD Shrink finishes encoding it has done its job - it has now handed off to a 3rd party burning program.

Post your burning log. If you use Nero, it is located at C:\Program Files\Ahead\Nero\NeroHistory.log

In the meantime, read the Golden rules of burning, make sure your DMA is on and your burner's firmware is up to date (see my sig for links).

Regards

[Shoeless]

Here is the History Log. Also, I tried to reset the DMA and the current configurations are:

Primary IDE Channel Properties

Device o
Device Type: Auto Detection
Transfer Mode: Dma if available
Current Transfer Mode:Ultra DMA Mode 5

Device 1
Device Type: Auto Detection
Transfer Mode: Dma if available
Current Transfer Mode: Not Applicable

Secondary IDE Channel Properties
Device o
Device Type: Auto Detection
Transfer Mode: Dma if available
Current Transfer Mode:Ultra DMA Mode 2

Device 1
Device Type: Auto Detection
Transfer Mode: Dma if available
Current Transfer Mode:Ultra DMA Mode 2

I can't find away or do not know how to change the Device 1 in the Primary IDE to Ultra DMA 5, I have uninstalled both the Secondary and Primary and rebooted with NO change.



Below is the History Log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <DVDRW IDE 16X> Version: A082 - HA 2 TA 0 - 6.3.1.17
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JLMS DVD-ROM XJ-HD166 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-148C D: CDRom0
JLMS DVD-ROM XJ-HD166 E: CDRom1
DVDRW IDE 16X G: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 249MB (255264kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.4.2005
NeroAPI
11:34:59 AM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

11:34:59 AM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

11:34:59 AM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

11:35:00 AM #4 Text 0 File Reader.cpp, Line 118
Reader running

11:35:00 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

11:35:00 AM #6 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running

11:35:00 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

11:35:00 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

11:35:00 AM #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

11:35:00 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

11:35:00 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

11:35:00 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: DVDRW IDE 16X, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

11:35:00 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:35:00 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [DVDRW IDE 16X ]
--------------------------------------------------------------

11:35:01 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

11:35:01 AM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

11:35:01 AM #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

11:35:01 AM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

11:35:01 AM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 8x (11,080 KB/s)

11:35:01 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:35:01 AM #21 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

11:35:01 AM #22 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes

11:44:15 AM #23 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00B70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 0x00 0x00 0x08 0x8F 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x08

11:44:15 AM #24 CDR -1135 File Writer.cpp, Line 304
Write error

11:44:15 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:44:15 AM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

11:44:39 AM #27 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 8x (11,080 KB/s)

11:44:39 AM #28 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

11:44:39 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.95 , size=24832 bytes, created 6/24/2004 5:42:00 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Thanks!!



:rolleyes:

[sfheath]

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JLMS DVD-ROM XJ-HD166 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-148C D: CDRom0
JLMS DVD-ROM XJ-HD166 E: CDRom1
DVDRW IDE 16X G: CDRom3
=======================
You don't have a port 0, ID 1 device so don't worry about UDMA5.
Looks like your DVD burner, G: is external. USB or FireWire?
Drivers up to date?
Since you have two internal drives, I'd be tempted to put the burner internally into the Seconday Master channel but save that for a last resort :-)

[Shoeless]

DVD Writer is External
USB 2.0

Drivers up to date
Firmware up to date

Thanks!

[sfheath]

I'd try again with maybe 4x speed on a ReWritable? especially for an external burner.

[cynthia]

Update your Nero - old versions had problems with USB burners. It's free.

[Shoeless]

I Updated Nero and everything seems to be working fine.

Thanks to (All) of you for the imput.