Burn succesful, but verify failed

[sleepyhead]

I have made an iso file using PgcEdit and now im trying to burn it to a dual layer, but every time it failed.

I do have set the layer break, but it wont work.

Anyone know what im doing wrong?

3545

Im completely new at this and english is not my native language, so please be gentlr with the technical terms :)

[cornholio7]

kan you post a full log

tak

[sleepyhead]

Is this what you mean?:

3549

Selv tak :)

[cornholio7]

try updating your firmware here http://forum.rpc1.org/dl_firmware.php?download_id=2056
and try setting the burn speed to 2,4

edit:
Is this what you mean?
yes :)

[sleepyhead]

Is it the KS04 (http://www.liteonit.com/ODD/WebFW/SOHW-1693S/DR16KS04.zip) or is it LtnRPC (http://dhc014.rpc1.org/LtnRPC/) i need to download?

You said i should try 2,4 speed instead. Ithought is was better with a lower speed

Thx for your help so far :)

[Chewy]

go for the KSOB(it's the newest)
at corn's link
http://forum.rpc1.org/dl_firmware.php?download_id=2056


2(point)4 2.4

[cornholio7]

over here its 2,4 chewy :)

[Chewy]

math and music should be the universal languages

:rotfl: :rotfl:

[cornholio7]

i dont think you would agree if you had heard kandis

@sleepyhead
wasn't there an .mds file
unfortunately i am not used to using pgc edit to make isos.
i know when you make an iso with dvd decrypter it makes an .mds file and the .mds file contains the layer break information , you need to choose an .mds file when burning so the programme knows where the layer break is
maybe its better for a pgc edit user to add to this

[sleepyhead]

Firmware updated (check):)

I used dvd-decrypter to decrypt the file, then PgcEdit to "jump to pgc" and make an iso

The log from PgcEdit is here:

3550

Hope this helps:)

[blutach]

@Sleepyhead - your ISO from PgcEdit is fine :)

Those Ritek D01 disks have not got the best reputation. Try switching to Verbatims and hopefully your problems will vanish.

Regards

[sleepyhead]

Im sorry to hear that about my discs...I have just bought 50 of them:smashead: :)

Could it be the settings in ImgBurn?

@blutach - It was your guide i was using, otherwise my iso probaly wouldnt have been fine, so thank you for that easy to follow guide :) :thumbs_up

[cornholio7]

no the discs are very hit and miss
if blu says your pgc iso is fine then the problem lies with the discs
lots of people having problems with them and a few having success
can't you return them and swap them for verbatims?

[cornholio7]

You said i should try 2,4 speed instead. Ithought is was better with a lower speed
just to add - you should be choosing a speed which the disc supports
the log shows 2,4x and 4x

[sleepyhead]

I dont think i can return them. I bought them on the internet, from GB, and i live in another country (the same as you, i think:) )

I try to write them a mail and see what they say.

Thank you all for the help so far:)

[sleepyhead]

Your right. I had not noticed that my self. I just thought the slower, the better. I will try to make a new burn, using 2,.4 right away.

Maybe I can use my coasters as ornaments for my christmas tree:)

[cornholio7]

remember to change the booktype to -ROM

you're welcome.
try the verbatim d/l discs


(du kunne sælge dem på qxl);)

[sleepyhead]

Change the booktype to -ROM - Done

In settings/General/Display warnings the box is checked (Select MDS file Not ISO), should i uncheck it?

@cornholio7 - qxl var nok en meget god ide

[cornholio7]

uncheck it because you have defined the layer break in pgc edit

[sleepyhead]

okey, now i have tried burning 2 times and i have 2 new coasters for my christmastree

The first one was my own mistake, i forgot to reboot, after udating the firmware:smashead:

The second time i did everything right(i think), but the verify failed the same place as the other, after 50%

Could it have something to do with the layerbreak or something i have checked or unchecked?

3564

[cornholio7]

you need to try verbatims.
it doesn't look like your drive likes these discs

[sleepyhead]

okey, you dont think it is my settings in ImgBurn?

[cornholio7]

no

the mistake is in different sectors. if it was the exact same sector it would indicate something wrong with the image but the mistakes in different sectors suggest media

verbatim, then lets see if you have success

[sleepyhead]

Do you know where the cheapest place is to buy verbatim, printable?

I bought the ritek at: http://www.bigpockets.co.uk/ , but the verbatims cost almost 4 £ each

[cornholio7]

i don't remember seeing verbatim printable anywhere in europe.

[sleepyhead]

They do have them at http://www.bigpockets.co.uk/ , right here: http://www.bigpockets.co.uk/product.php?lang=&submenu=DVD&menu=media&product_id=3536&session=f2b1fef67fa21a810c5595da472e3252

But they are expensive, compared to other brands. On the other hand, it is problaly more expensive bying cheap brands and make a lot of coasters:)

[cornholio7]

ok now i have seen them i europe :)
verbatim discs are a bit more expensive but there is a reason