DL guide?

[r1p]

is there a DL guide for ImgBurn?

[soup]

There is a user guide, see if it helps:

http://forum.digital-digest.com/showthread.php?t=55424

[r1p]

yep read through that, almost exactly like DVDD. But, the part for DL stuff isn't done yet. Was hoping it might be somewhere.

[blutach]

See Burn dual layer disks safely in my signature.

Regards

[r1p]

I'm looking for daemon tools now...

but I was hoping to try ImgBurn first before I try that method. And got a few questions.

Namely when using DVDD with ImgBurn what do I need to do. Cause I've just made two coasters now. Frist one DVDD didn't write correctly. Second one I think I screwed up when using ImgBurn.

I used DVDD like when I made a 1:1 copy.

>mode>iso>read

after it decrypted

jumped into ImgBurn and proceeded to write.

>mode>write

selected the file and let it go. So in 25sec of the burn the thing comes back with a error. Figured I did something wrong.

Can someone please help me, this is getting discouraging.
rip

[r1p]

oh yea and this learning curve is expensive

[r1p]

dang...

frimware is up to date, using verbatim DL I just don't know


I 13:49:22 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
W 13:49:22 Drive E:\ (FAT32) does not support single files > 4 GB
I 13:49:22 Initialising SPTI...
I 13:49:22 Searching for SCSI / ATAPI devices...
I 13:49:22 Found 1 CD-RW and 1 DVD±RW!
I 13:51:47 Operation Started!
I 13:51:47 Source File: C:\Documents and Settings\Owner\Desktop\btvs\btvs_02\BUFYDSC2.MDS
I 13:51:47 Source File Sectors: 4,135,446 (MODE1/2048)
I 13:51:47 Source File Size: 8,469,393,408 bytes
I 13:51:47 Source File Implementation Identifier: MEI
I 13:51:47 Destination Device: [0:0:0] SONY DVD RW DRU-810A 2.0d (F:) (USB)
I 13:51:47 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x)
I 13:51:47 Destination Media Sectors: 4,173,824
I 13:51:47 Write Mode: DVD
I 13:51:47 Write Type: SAO
I 13:51:47 Write Speed: 4x
I 13:51:47 Link Size: Auto
I 13:51:47 Test Mode: No
I 13:51:47 BURN-Proof: Enabled
I 13:51:47 Optimal L0 Data Zone Capacity: 2,067,776
I 13:51:47 Optimal L0 Data Zone Method: Copied From Original Disc
I 13:51:47 Filling Buffer...
I 13:51:50 Writing LeadIn...
I 13:52:01 Writing Image...
W 13:52:04 Failed to Write Sectors 5728 - 5759 - Write Error
W 13:52:04 Retrying (1 of 20)...
W 13:52:04 Retry Failed - Invalid Address For Write
W 13:52:04 Retrying (2 of 20)...
W 13:52:04 Retry Failed - Invalid Address For Write
W 13:52:04 Retrying (3 of 20)...
W 13:52:04 Retry Failed - Invalid Address For Write
W 13:52:04 Retrying (4 of 20)...
W 13:52:04 Retry Failed - Invalid Address For Write

and then continues on. could this be somthing?
W 13:49:22 Drive E:\ (FAT32) does not support single files > 4 GB

I don't remember if this was there on the first try, but got pretty far with that one.

[blutach]

I commented on your firmware in another thread. This is the firmware for a 810UL, but your burner is reporting as an 810A. I don't suppose there's too much difference.

Slow the burn to 2.4X - that's what I write my MKM's at.

Regards

[decrypter]

could this be somthing?
W 13:49:22 Drive E:\ (FAT32) does not support single files > 4 GB

Ita justa warninga thata drivea E is fat32-isa no problemo - youa burn froma drivea C