New Power Supply Wont Work ??!!!

[jlohojo7]

K guys figure this one out i am replacing my old stock vaio ps with a new THERMALTAKE purepower 430W. Got it in and all it would do was buzz or humm no fans spinning or anything sent it back to the manufacturer and got a replacementTHIS ONE WONT work finally took it to my friends plugged it in on his PC and fired up perfect. why wont it turn on in mine??


pleaes help me

jj

[jmet]

My recommendation is to double check all of your connections/cables. Sounds to me like something came loose or something.

[jlohojo7]

ive done that so so so many times with both of the units they sent to me

[jmet]

Have you plugged the old power supply back in?

[jlohojo7]

yea it works fine thats what im running on right now

[Chewy]

the protection on the thermaltake may be sensitive to a slow short, leave all the non-essential drives unplugged

[jlohojo7]

yea i already thought about that to the only thing plugged in is the hard drive 20 pin and the 4 pin next to it

also that is the only thing that i have plugged in while running my old ps unit no optical drives or fans notta zip nothing

also why will it boot up my friends compaq just fine on the first try?? and whats with the slight buzzing ??

[jmet]

Try a different brand/model power supply.

[jlohojo7]

do some just not work with certain mobo's ??

[Chewy]

doublecheck all the wires going into the main plug(mobo) and the 4 wire plug.

maybe one isn't making a good connection?

never run into this problem, anything about the sony ps that's different?

[jlohojo7]

only thing i can tell is that on the 4 pin theres
black yellow
black yellow

the new ps 4pin looks like this
orange black
yellow red

should it be 2 blacks and 2 yellows ??

[jlohojo7]

alright well im gonna turn it off for a min or two do some work on it ill be back on in like 10 mins dont run off on me guys !!!

[Chewy]

damn propritary computer manufactures, ought to be a law

[jlohojo7]

well guys the new ps has the 20 pin and that orange and black 4pin connected together and with the same sleeve so i figured since the plugs were connected and the females ends were right there together they went NOPE there was another 4 plug individual wire same colors as the old sony one plugged it in and fired right up . HOWEVER, that 4pin is just sitting there not plugged in to anything and its WAY to short to reach the other 4 pin plug which i am assuming is for my pci express which by the way since i got this new graphics card always says no signal between boot screens !!

[Chewy]

which i am assuming is for my pci express

yes

this new graphics card

takes a cd drive power supply connection?

[jlohojo7]

does the plug come from the ps or the graphics cards.

also now when i boot up there is a hardware monitor error and i have to go into the setup under power.
I press F1 and i continue normally or F2 to take me to setup whats wrong i made a previous post about this

I really want to get that problem taken care of it should automatically go to the log in screen.

Is there like a fan speed file that is missing upon boot up or what ??