Digital Video Forums

Go Back   Digital Video Forums > Other > Archive (Active) > VCD/SVCD > Conversion/Encoding

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
Old 5 Dec 2002, 10:54 PM   #1
Junior Member
Junior Member
 
Join Date: Dec 2002
Location: POLAND
Posts: 3
Question Converting the file many times-worse quality??

HI Everyone!!
I have a little question....
I ripped DVD and make it a Divx file (avi)
than i converted this avi file to mpg file
doest it make any difference in quality?? sholud I convert it to mpg at the begining or it doesn`t make any difference??
because now, this mpg file isn`t very good quality it isn`t sharp etc
Please help me
Thanks in Advance
zarkins is offline   Reply With Quote
Old 6 Dec 2002, 01:25 AM   #2
Retired
 
setarip's Avatar
 
Join Date: Dec 2001
Posts: 24,955
Default

"I ripped DVD and make it a Divx file (avi)
than i converted this avi file to mpg file
doest it make any difference in quality?"

That depends on what procedures and what settings you use in each step of the procedures. Although other posters make suggest different procedures (including direct conversion from DVD to MPEG1-VideoCD), this is what I do:


From Ripping through VCD (by me)

1) Rip DVD with DVDDecrypter

2) Convert to .AVI using Flask v.0.594PX3 (improved conversion time versus "plain vanilla" 0.594 - and less prone to lockup)
A) Using DivX v.3.11 codec (Fast Motion 910kbps, keyframe every 10 seconds)
B) Using PCM (uncompressed) audio at 48,000Khz (Maintains synchronization of audio and video)

3) Load .AVI into VirtualDub
A) Set "Video" to "Direct Stream Copying"
B) Set "Audio" to "Full Processing Mode"
C) Under "Audio", click on "Conversion", select "44,100Khz"
D) Under "Audio", click on "Compression" select "MP3", "44,100Khz", "96Kbps"
E) Save revised .AVI with new filename

Then, to create a VCD:

1) Load .AVI file into TMPGEnc
2) Set to "System Video and Audio" (lower right side)
3) Click on "Setting" radio button
4) Click on "System" tab, change mode to "MPEG1-VideoCD" (from default of "MPEG1")
5) Click on "Advanced" tab, change "Video arrange method" to "Center (Custom Size"), change dimensions to 352x288 or 352x240
6) Change "Source aspect ratio" to either "4:3 525 line (NTSC 704x480)", "4:3 525 line (NTSC)", or "16:9 525 line (NTSC)" - If you're in the PAL world choose either of the two similar PAL settings instead
7) Under the "Video" tab, change the dimensions to 352x288 or 352x240 (Note: "Video" tab mode of "MPEG1" is okay) - for highest quality set "Motion Search Precision" to "Highest Quality". Change the "Aspect Ratio" to match, as closely as possible, the "Source Aspect Ratio" you set under the "Advanced" tab.
8) Change "Rate Control Mode" to "Automatic VBR (CQ_VBR)
9) Under the "Audio" tab, set to 44,100 224Kbps
10) Press "Start"


Note that if your video runs longer than 60 minutes, you'll have to subsequently split your VCD-MPG file in two. This too can be easily and precisely accomplished using TMPGEnc. Under the "Files" dropdown menu, click on "MPEG Tools" and select the "Merge & Cut" tab. Once again, make sure to change the mode to "MPEG1-Video CD". Load your file and enter a new (.MPG) name in the "Output file" box. Then doubleclick on the ORIGINAL file's name in the window, which will bring you to the cutting area. Select your desired start and end points for the first half, click on "Okay" which will bring you back to the first window and generate (in a sequence of three automated steps) the first new file. To create the second new file, repeat the steps starting with "Then doubleclick on the ORIGINAL..." (be extra patient with the second half, as the program has to do more seeking to establish the beginning of the new file).
setarip is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT +10. The time now is 11:54 AM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright © 1999 - 2011 Digital Digest

Visit DivXLand   Visit dvdloc8.com