Digital Video Forums

Go Back   Digital Video Forums > Other > Archive (Closed) > Junior Members/Newbies

 
 
LinkBack Thread Tools Rate Thread Display Modes
Old 3 Jan 2008, 11:51 AM   #1
Junior Member
Junior Member
 
Join Date: Jan 2008
Posts: 13
Default Can't burn CDs after installing new DVD drive

Here's my problem: I got a Sony 190A DVD drive for Christmas, and installed it a few days ago. I replaced my old CD-RW drive with the new one, and left in the CD-R drive. Finally I was able to start burning DVDs. Today I tried to burn a CD using the CD-R drive as I always had. But it doesn't show up anywhere on any of my burning programs. I can put in a CD and listen to it in the drive, but when I want to burn a CD that drive is not listed as an option. So...... I have been trying to burn a CD using the DVD drive, which I should be able to do. However, I have tried several times with different programs (Real Player, Nero, Roxio, and Windows Media), and each time the audio "looks" like it burns, but when it is put into a CD player or back into the computer (either drive), it says the disc is empty. Each time the burning was error-free except for Nero since I clicked the "check after burning" or whatever. I've done this 5 times and I'm tired of the exact same thing happening each time. I know this forum is for DVDs but I found it a few days ago while putting the new drive in and it seems better than any CD forum I've found.

I was going to post the burn log from Nero here, but I just realized that I deleted it. I had it saved in the music folder, and I deleted that folder to re-download the files to see if that was the problem.
bcburton21 is offline  
Old 3 Jan 2008, 12:00 PM   #2
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

dvd rw's burn dvd's and cd's

cd rw's burn cd's

cd-rom's only read cd's

Quote:
Real Player, Nero, Roxio, and Windows Media
all those programs don't get along well and anything is liable to happen, even the drives disappearing from my computer and device manager
Chewy is offline  
Old 3 Jan 2008, 02:55 PM   #3
Junior Member
Junior Member
 
Join Date: Jan 2008
Posts: 13
Default

OK, I had seen on a couple other sites that it might be programs interfering with each other but I didn't want to just start removing them until I got some specific advice.

Which programs do you recommend I keep and which should I get rid of? Thanks!!
bcburton21 is offline  
Old 3 Jan 2008, 03:16 PM   #4
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

nero was the only one mentioned that doesn't mess up other programs

You don't just remove 1 or 2 and then it's fixed

You remove all of them and clean the registry, if that's the problem?
Chewy is offline  
Old 4 Jan 2008, 01:37 AM   #5
Junior Member
Junior Member
 
Join Date: Jan 2008
Posts: 13
Default

Nero is the only one that is new, all the others have been on for a year or more.

Is there a program that you recommend to clean the registry? I have done that once before but I don't remember how I did it.
bcburton21 is offline  
Old 4 Jan 2008, 01:47 AM   #6
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

Quote:
if that's the problem?
there are basically 2 courses of action

one is to try different hardware in your computer and/or try your hardware in another computer

this isolates the software/hardware issue

If you feel it's the software one then use these links to fix(if that's the problem)


we can analyze the filter drivers

http://www.bustrace.com/products/devfilter.htm

http://www.cdr-zone.com/forum/about4719.html

http://support.microsoft.com/?scid=k...4060&x=12&y=13

It's kind of weird that I have NEVER had this problem and I use nero a lot for a long time

I DO fairly frequently run the nero clean tool and reinstall when I think it's getting the least bit glitchy

you can play around with these or just remove all programs and clean everything up and reinstall nero and test

Last edited by Chewy; 4 Jan 2008 at 01:49 AM
Chewy is offline  
Old 4 Jan 2008, 02:35 AM   #7
Junior Member
Junior Member
 
Join Date: Jan 2008
Posts: 13
Default

I don't really have the option of trying different hardware or a different computer to test. So I will try to clean everything up later today or tomorrow.

I searched the internet before posting on here, and I wasn't able to find anyone who had this same issue. So hopefully this will work! Thanks for the help and I will let you know after I have a chance to try this.
bcburton21 is offline  
Old 4 Jan 2008, 02:59 AM   #8
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

FAQ: How To Post A Nero Burn Log by the LT.

maybe nero saved that log?
Chewy is offline  
Old 5 Jan 2008, 03:35 AM   #9
Junior Member
Junior Member
 
Join Date: Jan 2008
Posts: 13
Default

I checked that file. It contains only 3 burn logs, which are the first 3 DVDs I burned. I have burned 4 DVDs (1 failure) and 1 CD (failure) total since installing the drive.
bcburton21 is offline  
Old 5 Jan 2008, 04:07 AM   #10
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

if you want we can use the best burn program to troubleshoot the issue

Imgburn

don't worry it won't mess anything up and it comes with a tool to fix what other programs mess up

http://www.imgburn.com/

let us know if you want to go that route

any nero log would have been better than no nero log
Chewy is offline  
Old 5 Jan 2008, 09:17 AM   #11
Junior Member
Junior Member
 
Join Date: Jan 2008
Posts: 13
Default

I decided to sacrifice another CD to give you a burn log....and this time it burned and plays fine. I guess 6th time is a charm. Don't know why though since I'm pretty sure I didn't do anything different this time.

I think I will still remove Roxio and Rp just to be sure. Thanks for all your help!
bcburton21 is offline  
Old 5 Jan 2008, 10:28 AM   #12
Junior Member
Junior Member
 
Join Date: Jan 2008
Posts: 13
Default

Scratch that about it playing good... Most of the CD is ok but the last few songs skip badly. I burned at the slowest option that nero gave which was 8x. Is there any way to slow that down even more?
bcburton21 is offline  
Old 5 Jan 2008, 10:49 AM   #13
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

we don't get a good mid code from any log with blank cd's, so what actual brand did you use

I have had good luck only with verbatim and sony branded cd's

taiyo yuden ones, very hard to find and pricey are the best(made in japan only)
Chewy is offline  
Old 5 Jan 2008, 11:07 AM   #14
Junior Member
Junior Member
 
Join Date: Jan 2008
Posts: 13
Default

I have been using maxelle and napster brand cds. This last one (7th try) that I just burnt was an hp brand because I have ran out of my napter cds.

On this last CD I'm back to the original problem of error-free burning but then the CD player says "No Disc". I keep hoping there is something obvious and easy that I'm doing wrong. Here is the burn log for it:

Bethany Burton
Home
Nero Serial Removed-4026-X8E5-**** (*)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 6/11/2007 8:36:34 AM

NT-SPTI used
Nero Version: 7.5.14.6
Internal Version: 7, 5, 14, 6
(Nero Express)
Recorder: <SONY DVD RW DRU-190A> Version: 1.61 - HA 1 TA 1 - 7.5.14.6
Adapter driver: <IDE> HA 1
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Lite-On LTN486S 48x Max >Version: YDS4 - HA 1 TA 0 - 7.5.14.6
=== Scsi-Device-Map ===
DiskPeripheral : ST320011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Lite-On LTN486S 48x Max atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-190A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
Lite-On LTN486S 48x Max D: CDRom0
SONY DVD RW DRU-190A E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 254MB (260912kB)
Free physical memory: 87MB (89548kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.1.2008
Audio CD
5:42:49 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5:42:49 PM #2 CDADOC -1 File Cdadoc.cpp, Line 1635
Audio item log info:
Audio document burn settings:
=============================
Burn mode: TAO,
CD Text: Off,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 02:39.41, Pause frames: 150, Filters: 1, Name: '01 - Steve Earle - Tennessee Blues.mp3'.
Track 02: Length: 04:02.70, Pause frames: 000, Filters: 1, Name: '02 - Steve Earle - Down Here Below.mp3'.
Track 03: Length: 04:09.27, Pause frames: 000, Filters: 1, Name: '03 - Steve Earle - Satellite Radio.mp3'.
Track 04: Length: 04:18.47, Pause frames: 000, Filters: 1, Name: '04 - Steve Earle - City Of Immigrants.mp3'.
Track 05: Length: 03:12.15, Pause frames: 000, Filters: 1, Name: '05 - Steve Earle - Sparkle And Shine.mp3'.
Track 06: Length: 03:47.12, Pause frames: 000, Filters: 1, Name: '06 - Steve Earle - Come Home To Me.mp3'.
Track 07: Length: 03:36.41, Pause frames: 000, Filters: 1, Name: '07 - Steve Earle - Jericho Road.mp3'.
Track 08: Length: 02:54.47, Pause frames: 000, Filters: 1, Name: '08 - Steve Earle - Oxycontin Blues.mp3'.
Track 09: Length: 04:20.03, Pause frames: 000, Filters: 1, Name: '09 - Steve Earle - Red Is The Color.mp3'.
Track 10: Length: 03:15.68, Pause frames: 000, Filters: 1, Name: '10 - Steve Earle - Steve's Hammer (For Pete).mp3'.
Track 11: Length: 03:01.60, Pause frames: 000, Filters: 1, Name: '11 - Steve Earle - Days Aren't Long Enough.mp3'.
Track 12: Length: 02:55.56, Pause frames: 000, Filters: 1, Name: '12 - Steve Earle - Way Down In The Hole.mp3'.
Track 13: Length: 05:31.33, Pause frames: 000, Filters: 1, Name: '07 Business as Usual.wma'.
Track 14: Length: 03:42.12, Pause frames: 000, Filters: 1, Name: '08 Center of the Universe.wma'.
Track 15: Length: 04:22.11, Pause frames: 000, Filters: 1, Name: '09 It's Your World Now.wma'.
Track 16: Length: 02:37.30, Pause frames: 000, Filters: 1, Name: '05-camel_walk_192_lame_cbr.mp3'.
Total size: 58:29.48

5:42:49 PM #3 Text 0 File Burncd.cpp, Line 3178
SONY DVD RW DRU-190A
Power-Burn activated

5:42:49 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

5:42:49 PM #5 Text 0 File Burncd.cpp, Line 3490
Turn on Track-At-Once, using CD-R/RW media

5:42:50 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 263072 ( 58:29.47)

5:42:50 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

5:42:50 PM #8 Text 0 File DlgWaitCD.cpp, Line 2940
Recorder: SONY DVD RW DRU-190A;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

5:42:50 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:42:50 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (01 - Steve Earle - Tennessee Blues.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 11966 (11966) = #11966/2:39.41
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11964 blocks [E: SONY DVD RW DRU-190A]
1: TRM_AUDIO_NOPRE (02 - Steve Earle - Down Here Below.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 18220 (18220) = #18220/4:2.70
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18218 blocks [E: SONY DVD RW DRU-190A]
2: TRM_AUDIO_NOPRE (03 - Steve Earle - Satellite Radio.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 18702 (18702) = #18702/4:9.27
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18700 blocks [E: SONY DVD RW DRU-190A]
3: TRM_AUDIO_NOPRE (04 - Steve Earle - City Of Immigrants.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 19397 (19397) = #19397/4:18.47
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19395 blocks [E: SONY DVD RW DRU-190A]
4: TRM_AUDIO_NOPRE (05 - Steve Earle - Sparkle And Shine.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 14415 (14415) = #14415/3:12.15
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14413 blocks [E: SONY DVD RW DRU-190A]
5: TRM_AUDIO_NOPRE (06 - Steve Earle - Come Home To Me.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 17037 (17037) = #17037/3:47.12
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17035 blocks [E: SONY DVD RW DRU-190A]
6: TRM_AUDIO_NOPRE (07 - Steve Earle - Jericho Road.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 16241 (16241) = #16241/3:36.41
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16239 blocks [E: SONY DVD RW DRU-190A]
7: TRM_AUDIO_NOPRE (08 - Steve Earle - Oxycontin Blues.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 13097 (13097) = #13097/2:54.47
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13095 blocks [E: SONY DVD RW DRU-190A]
8: TRM_AUDIO_NOPRE (09 - Steve Earle - Red Is The Color.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 19503 (19503) = #19503/4:20.3
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19501 blocks [E: SONY DVD RW DRU-190A]
9: TRM_AUDIO_NOPRE (10 - Steve Earle - Steve's Hammer (For Pete).mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 14693 (14693) = #14693/3:15.68
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14691 blocks [E: SONY DVD RW DRU-190A]
10: TRM_AUDIO_NOPRE (11 - Steve Earle - Days Aren't Long Enough.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 13635 (13635) = #13635/3:1.60
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13633 blocks [E: SONY DVD RW DRU-190A]
11: TRM_AUDIO_NOPRE (12 - Steve Earle - Way Down In The Hole.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 13181 (13181) = #13181/2:55.56
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13179 blocks [E: SONY DVD RW DRU-190A]
12: TRM_AUDIO_NOPRE (07 Business as Usual.wma)
2 indices, index0 (0) not provided
original disc pos #0 + 24858 (24858) = #24858/5:31.33
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 24856 blocks [E: SONY DVD RW DRU-190A]
13: TRM_AUDIO_NOPRE (08 Center of the Universe.wma)
2 indices, index0 (0) not provided
original disc pos #0 + 16662 (16662) = #16662/3:42.12
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16660 blocks [E: SONY DVD RW DRU-190A]
14: TRM_AUDIO_NOPRE (09 It's Your World Now.wma)
2 indices, index0 (0) not provided
original disc pos #0 + 19661 (19661) = #19661/4:22.11
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19659 blocks [E: SONY DVD RW DRU-190A]
15: TRM_AUDIO_NOPRE (05-camel_walk_192_lame_cbr.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 11805 (11805) = #11805/2:37.30
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11803 blocks [E: SONY DVD RW DRU-190A]
--------------------------------------------------------------

5:42:50 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: SONY DVD RW DRU-190A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 16: Idx 0 Idx 1 Next Trk
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 28496832, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 28496832 28496832 71350272, ISRC ""
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 71350272 71350272 115337376, ISRC ""
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 115337376 115337376 160959120, ISRC ""
5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 160959120 160959120 194863200, ISRC ""
6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 194863200 194863200 234934224, ISRC ""
7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 234934224 234934224 273133056, ISRC ""
8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 273133056 273133056 303937200, ISRC ""
9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 303937200 303937200 349808256, ISRC ""
10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 349808256 349808256 384366192, ISRC ""
11: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 384366192 384366192 416435712, ISRC ""
12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 416435712 416435712 447437424, ISRC ""
13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 447437424 447437424 505903440, ISRC ""
14: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 505903440 505903440 545092464, ISRC ""
15: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 545092464 545092464 591335136, ISRC ""
16: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 591335136 591335136 619100496, ISRC ""
bcburton21 is offline  
Old 5 Jan 2008, 11:07 AM   #15
Junior Member
Junior Member
 
Join Date: Jan 2008
Posts: 13
Default

Here's the rest:

DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x21 | 0 | 0 | 0x00
0 | 1 | 1 | 0x21 | 11966 | 0 | 0x00
11966 | 2 | 0 | 0x21 | 0 | 0 | 0x00
11966 | 2 | 1 | 0x21 | 18220 | 11966 | 0x00
30186 | 3 | 0 | 0x21 | 0 | 0 | 0x00
30186 | 3 | 1 | 0x21 | 18702 | 30186 | 0x00
48888 | 4 | 0 | 0x21 | 0 | 0 | 0x00
48888 | 4 | 1 | 0x21 | 19397 | 48888 | 0x00
68285 | 5 | 0 | 0x21 | 0 | 0 | 0x00
68285 | 5 | 1 | 0x21 | 14415 | 68285 | 0x00
82700 | 6 | 0 | 0x21 | 0 | 0 | 0x00
82700 | 6 | 1 | 0x21 | 17037 | 82700 | 0x00
99737 | 7 | 0 | 0x21 | 0 | 0 | 0x00
99737 | 7 | 1 | 0x21 | 16241 | 99737 | 0x00
115978 | 8 | 0 | 0x21 | 0 | 0 | 0x00
115978 | 8 | 1 | 0x21 | 13097 | 115978 | 0x00
129075 | 9 | 0 | 0x21 | 0 | 0 | 0x00
129075 | 9 | 1 | 0x21 | 19503 | 129075 | 0x00
148578 | 10 | 0 | 0x21 | 0 | 0 | 0x00
148578 | 10 | 1 | 0x21 | 14693 | 148578 | 0x00
163271 | 11 | 0 | 0x21 | 0 | 0 | 0x00
163271 | 11 | 1 | 0x21 | 13635 | 163271 | 0x00
176906 | 12 | 0 | 0x21 | 0 | 0 | 0x00
176906 | 12 | 1 | 0x21 | 13181 | 176906 | 0x00
190087 | 13 | 0 | 0x21 | 0 | 0 | 0x00
190087 | 13 | 1 | 0x21 | 24858 | 190087 | 0x00
214945 | 14 | 0 | 0x21 | 0 | 0 | 0x00
214945 | 14 | 1 | 0x21 | 16662 | 214945 | 0x00
231607 | 15 | 0 | 0x21 | 0 | 0 | 0x00
231607 | 15 | 1 | 0x21 | 19661 | 231607 | 0x00
251268 | 16 | 0 | 0x21 | 0 | 0 | 0x00
251268 | 16 | 1 | 0x21 | 11805 | 251268 | 0x00
263073 | lead-out | 1 | 0x01 | 0 | 0 | 0x00

5:42:50 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 1. Length: 11966 -> 11964.

5:42:50 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 2. Length: 18220 -> 18218.

5:42:50 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 3. Length: 18702 -> 18700.

5:42:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 4. Length: 19397 -> 19395.

5:42:50 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 5. Length: 14415 -> 14413.

5:42:50 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 6. Length: 17037 -> 17035.

5:42:50 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 7. Length: 16241 -> 16239.

5:42:50 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 8. Length: 13097 -> 13095.

5:42:50 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 9. Length: 19503 -> 19501.

5:42:50 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 10. Length: 14693 -> 14691.

5:42:50 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 11. Length: 13635 -> 13633.

5:42:50 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 12. Length: 13181 -> 13179.

5:42:50 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 13. Length: 24858 -> 24856.

5:42:50 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 14. Length: 16662 -> 16660.

5:42:50 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 15. Length: 19661 -> 19659.

5:42:50 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 16. Length: 11805 -> 11803.

5:44:02 PM #28 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

5:44:02 PM #29 Text 0 File Burncd.cpp, Line 4263
Caching options: cache CDRom or Network-No, small files-No (<64KB)

5:44:02 PM #30 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 8x (1,200 KB/s)

5:44:02 PM #31 Phase 92 File dlgbrnst.cpp, Line 1760
Recording quality may be affected by not using JustSpeed option

5:44:02 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:44:02 PM #33 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:44:02 PM #34 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 40868800

5:44:29 PM #35 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #12116

5:44:29 PM #36 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:44:45 PM #37 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #30336

5:44:46 PM #38 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:44:59 PM #39 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #49038

5:45:00 PM #40 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:45:13 PM #41 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #68435

5:45:13 PM #42 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:45:24 PM #43 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #82850

5:45:24 PM #44 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:45:36 PM #45 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #99887

5:45:36 PM #46 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:45:47 PM #47 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #116128

5:45:47 PM #48 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:45:56 PM #49 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #129225

5:45:56 PM #50 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:46:14 PM #51 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #148728

5:46:14 PM #52 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:46:33 PM #53 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #0): write at #163421

5:46:33 PM #54 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:46:51 PM #55 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #0): write at #177056

5:46:51 PM #56 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:47:08 PM #57 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #0): write at #190237

5:47:08 PM #58 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:48:06 PM #59 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #0): write at #215095

5:48:06 PM #60 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:48:26 PM #61 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 14 (relocatable, no disc pos, no patch infos, orig at #0): write at #231757

5:48:26 PM #62 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:48:47 PM #63 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 15 (relocatable, no disc pos, no patch infos, orig at #0): write at #251418

5:48:47 PM #64 Text 0 File MMC.cpp, Line 22359
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : OFF

5:49:06 PM #65 Text 0 File MMC.cpp, Line 17120
<SONY DVD RW DRU-190A > start Close Session

5:49:23 PM #66 Phase 37 File dlgbrnst.cpp, Line 1760
Burn process completed successfully at 8x (1,200 KB/s)

5:49:24 PM #67 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.

5:49:24 PM #68 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.

5:49:24 PM #69 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

5:49:27 PM #70 Text 0 File Cdrdrv.cpp, Line 11108
DriveLocker: UnLockVolume completed

5:49:27 PM #71 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
bcburton21 is offline  
 

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing a new Hard Drive? r_j General Computing 5 25 Dec 2007 04:56 AM
Removing old hard drive and installing different issues trishbaby100 General Computing 1 26 May 2007 01:35 AM



All times are GMT +10. The time now is 11:29 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright © 1999 - 2011 Digital Digest

Visit DivXLand   Visit dvdloc8.com