Digital Video Forums

Go Back   Digital Video Forums > Disc Formats > DVD Blank Media, Burning, Recording Hardware

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
Old 29 Jun 2013, 04:15 AM   #1
Junior Member
Junior Member
 
Join Date: Jun 2013
Posts: 1
Default Error message "PMA update failure" in DVD Shrink

I have been successfully burning dvds and all then I get this message. Anyone have any idea what the problem might be? Here is the log...
Thank you -- John

9031-0080-W804-CZW7-321E-HWH9-****-****
8007-2089-PMWW-CU9M-07CM-M6XX-****-****

Windows 7 6.1
AMD64
Wow64Process
Nero Version: 12.0.28.0
Internal Version: 12,0,28,0

Recorder: <ATAPI DVD A DH16ABSH> Version: YA12 - HA 1 TA 0 - 12.0.28.0
Adapter driver: <Serial ATA> HA 1
Bus Type : via Inquiry data
CD-ROM: <ATAPI DVD A DH16ABSH >Version: YA12 - HA 1 TA 0 - 12.0.28.0
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD20EARX-22PASB0 iaStorV Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD A DH16ABSH iaStorV Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD A DH16ABSH D: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.6.2013
Burn DVD Image
15:39:17 #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

15:39:17 #2 PHASE 214 File dlgbrnst.cpp, Line 2066
Generation of disc structures started

15:39:17 #3 IMAGEGEN -10 File ImageGen.cpp, Line 398
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 4682338304
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Users\John\Documents\Hyde Park on Hudson.nrg>

15:39:17 #4 PHASE 215 File dlgbrnst.cpp, Line 2066
Generation of disc structures completed

15:39:17 #5 Text 0 File Burncd.cpp, Line 3605
Turn on Disc-At-Once, using DVD media

15:39:17 #6 Text 0 File Cdrdrv.cpp, Line 10675
---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h

Last address to be written: 2286147

15:39:18 #8 Text 0 File DlgWaitCD.cpp, Line 346
[D: DVD A DH16ABSH ] Write in overburning mode: NO (enabled: CD)

15:39:18 #9 Text 0 File DlgWaitCD.cpp, Line 3034
Recorder: ATAPI DVD A DH16ABSH, Media type: DVD-R
Disc Manufacturer ID: <SONY16> <D1>
Disc Application Code: 64, Disc Physical Code: 193

15:39:18 #10 Text 0 File DlgWaitCD.cpp, Line 537
[D: DVD A DH16ABSH ] >>> Protocol of DlgWaitCD activities: <<<
=========================================

15:39:18 #11 Text 0 File ThreadedTransferInterface.cpp, Line 878
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2286148 (2286148) = #2286148/508:1.73
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286148 blocks [D: ATAPI DVD A DH16ABSH]
--------------------------------------------------------------

15:39:18 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1094
Prepare [D: ATAPI DVD A DH16ABSH] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682031104, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2286148 | 0 | 0x00
2286148 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: DVD-R

15:39:18 #13 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

15:39:18 #14 Text 0 File Burncd.cpp, Line 4467
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

15:39:18 #15 PHASE 24 File dlgbrnst.cpp, Line 2066
Caching of files started

15:39:18 #16 Text 0 File Burncd.cpp, Line 4589
Cache writing successful.

15:39:18 #17 PHASE 25 File dlgbrnst.cpp, Line 2066
Caching of files completed

15:39:18 #18 PHASE 36 File dlgbrnst.cpp, Line 2066
Burn process started at 16x (22,160 KB/s)

15:39:18 #19 Text 0 File Cdrdrv.cpp, Line 10675
---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................00 00 00 00 00 00 00 00 ................

15:39:18 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2924
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

15:39:18 #21 Text 0 File Cdrdrv.cpp, Line 10675
---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
0


..

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:39:18 #22 Text 0 File DVDR.cpp, Line 3135
Recording mode: Sequential Recording Mode

15:39:18 #23 Text 0 File DVDR.cpp, Line 3293
Start write address at LBA 0
DVD high compatibility mode: Yes

15:39:18 #24 SPTI -1066 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0bba8d00: Len x648

15:39:18 #25 Text 0 File Cdrdrv.cpp, Line 10675
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0, Extended part version: 0


15:39:18 #26 Text 0 File DVDR.cpp, Line 3435
Reserved Track size: 2286160 (22E250h, 4465MB) -> return code 0

15:39:18 #27 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800- 15:44:57.174

15:44:59 #55 Text 0 File WriterStatus.cpp, Line 244
<D: ATAPI DVD A DH16ABSH> start writing Lead-Out at LBA 2286148 (22E244h), length 0 blocks

15:45:00 #56 PHASE 181 File dlgbrnst.cpp, Line 2066
Writing lead-out...

15:50:40 #57 SPTI -1194 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 04
Buffer x0bbba280: Len x20

15:50:41 #58 Text 0 File DVDR.cpp, Line 3748
EndDAO: Last written address was 2286159 (22E24Fh)

15:50:41 #59 CDR -1194 File Writer.cpp, Line 300
PMA update failure
D: ATAPI DVD A DH16ABSH

15:50:41 #60 TRANSFER -24 File ThreadedTransfer.cpp, Line 1233
Could not perform end of Disc-at-once

15:50:41 #61 TRANSFER -20 File ThreadedTransfer.cpp, Line 1233
Could not perform Write

15:50:41 #62 CDR -1194 File Writer.cpp, Line 339
PMA update failure
D: ATAPI DVD A DH16ABSH

15:50:41 #63 Text 0 File DVDPlusDualLayer.cpp, Line 1462
SetDriveCaps: Set LAST LBA of layer 1 to 0

15:50:41 #64 PHASE 38 File dlgbrnst.cpp, Line 2066
Burn process failed at 16x (22,160 KB/s)

15:50:41 #65 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

15:50:41 #66 Text 0 File Cdrdrv.cpp, Line 12127
DriveLocker: UnLockVolume completed

15:50:41 #67 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
jwmart is offline   Reply With Quote
Old 1 Jul 2013, 02:19 AM   #2
Digital Video Expert
Digital Video Expert
 
PurpleDemon's Avatar
 
Join Date: Mar 2006
Posts: 716
Default

This is a burning issue and has nothing to do with DVD Shrink.
Quote:
CdRomPeripheral : ATAPI DVD A DH16ABSH iaStorV Port 0 ID 1 DMA: Off
You need to turn on your DMA
Read THIS. It will help. Even though the instructions were written for Windows XP the device manager works the same.
Also have you change media (Blank disks) recently? That is another cause of the failure.
__________________

PurpleDemon is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT +10. The time now is 12:40 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright © 1999 - 2011 Digital Digest

Visit DivXLand   Visit dvdloc8.com