Digital Video Forums

Go Back   Digital Video Forums > Disc Formats > DVD Blank Media, Burning, Recording Hardware

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
Old 3 Aug 2005, 12:48 AM   #1
Junior Member
Junior Member
 
Join Date: Aug 2005
Posts: 3
Default Please help a newbie with an error...

Installed a Sony 710A a while back, and it's worked for burning CDs, just started to try with DVDs. Creating some coasters though, and it's time to finally ask the community instead of trying to read through and try the solutions I come across. Below is the log of my latest attempt at a burn of The Incredibles (from the HD). It looks like a DMA problem, however, when I try to change the setting, it does show DMA if available, but one of the properties shows a greyed out Current Transfer mode of "PIO Mode", and I cannot change it. Can someone assist? Are there any other problems with the log? Only other thing I am wondering about is on my device manager, both dvd drives are showing up as Primary IDE channel. I can post the picts of the properties if needed too. Thanks in advance...

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 6:33:44 PM
Nero API version: 6.3.1.19
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-710A> Version: BY03 - HA 0 TA 1 - 6.3.1.19
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6Y080M0 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 D: CDRom0
SONY DVD RW DRU-710A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514124kB)
Free physical memory: 181MB (185384kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.7.2005
NeroAPI
4:06:44 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

4:06:44 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

4:06:44 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

4:06:44 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

4:06:44 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

4:06:44 PM #6 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-710A running

4:06:44 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:06:44 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:06:45 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

4:06:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2263967 (503:06.17, 4421MB)

4:06:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

4:06:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

4:06:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:06:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2263968 (2263968) = #2263968/503:6.18
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263968 blocks [SONY DVD RW DRU-710A ]
--------------------------------------------------------------

4:06:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4636606464, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2263968 | lead-out | 1 | 0x00 | 0x41

4:06:45 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

4:06:45 PM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

4:06:45 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

4:06:45 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

4:06:45 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:06:45 PM #21 Text 0 File DVDR.cpp, Line 1932
Recording mode: Sequential Recording Mode

4:06:45 PM #22 Text 0 File Mmc.cpp, Line 20464
Set BUFE: Power-Burn -> ON , Generic write control : ON

4:06:45 PM #23 Text 0 File DVDR.cpp, Line 2073
Start write address at LBA 0
DVD high compatibility mode: Yes

4:06:45 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:06:45 PM #25 Text 0 File DVDR.cpp, Line 4817
Drive: SONY DVD RW DRU-710A
Book Type request: DVD-ROM
Changing the book type was finished with error code: 0

4:07:43 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
16:07:43.000 - SONY DVD RW DRU-710A\H0 T1 : Queue again later

4:08:22 PM #27 Text 0 File Cdrdrv.cpp, Line 1294
16:08:22.984 - SONY DVD RW DRU-710A\H0 T1 : Queue again later

4:19:54 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x00CC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x08 0x19 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

4:19:54 PM #29 CDR -25 File Writer.cpp, Line 304
Queue again later
SONY DVD RW DRU-710A\H0 T1

4:19:54 PM #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:19:54 PM #31 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

4:19:54 PM #32 Text 0 File DVDR.cpp, Line 2315
EndDAO: Last written address was 530911

4:19:54 PM #33 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2x (2,770 KB/s)

4:19:54 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

4:19:54 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 15, 1, size=92672 bytes, created 7/12/2004 3:40:00 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 15, 1, size=28672 bytes, created 7/12/2004 3:40:42 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 15, 1, size=7680 bytes, created 7/12/2004 3:44:06 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ewanioc is offline   Reply With Quote
Old 3 Aug 2005, 12:51 AM   #2
Demigod of Digital Video
 
LT. Columbo's Avatar
 
Join Date: Nov 2004
Location: Los Angeles, CA
Posts: 10,671
Default

"CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: Off"

"however, when I try to change the setting, it does show DMA if available, but one of the properties shows a greyed out Current Transfer mode of "PIO Mode", and I cannot change it"


yes DMA is off:see here for how to fix that.

FAQ: What's all this about DMA?

"Book Type request: DVD-ROM
Changing the book type was finished with error code: 0"

you can't do this with " -" media. see here

FAQ: What's all this about bitsetting/booktype?



get rid of incd with the clean tool, it is known to be very problematic

http://www.nero.com/eng/Clean_Tools.html

"Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 15, 1, size=92672 bytes, created 7/12/2004 3:40:00 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 15, 1, size=28672 bytes, created 7/12/2004 3:40:42 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 15, 1, size=7680 bytes, created 7/12/2004 3:44:06 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:"

"cmc mag" media

i don't think that is a good choice for the burner you are using. my link below can help determine a more suitable media. be sure your firmware is up to date.
__________________
"One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
Columbo moments...
"Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
"You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
(An Exercise In Fatality, 1974)



Last edited by columbo999; 3 Aug 2005 at 12:59 AM
LT. Columbo is offline   Reply With Quote
Old 3 Aug 2005, 01:35 AM   #3
Junior Member
Junior Member
 
Join Date: Aug 2005
Posts: 3
Default

Thanks - Tried to fix the DMA problem by removing the device and letting the system pick it back up, but that did not work; same problem. Also tried someone's suggestion by going into the registry and removing some lines. Same result.

Changing the book type - didn't know it was doing that - based on the link, the Sony 710A cannot change that setting, so it would seem like you cannot record to DVD-R?

Will get rid of InCD

As for the media, tried both with TDK DVD-R and Memorex DVD-R (recent purchases but do not know the exact models). And on the link provided, looks like TDK and memorex work.

And firmware was the latest.

Thanks again...
ewanioc is offline   Reply With Quote
Old 5 Aug 2005, 10:10 PM   #4
Junior Member
Junior Member
 
Join Date: Aug 2005
Posts: 3
Default

Still was not able to get the drive to DMA (next step is flipping the drives), got rid of the InCd, updated the firmware, and the burn worked (played it on the pc, not a dvd player yet). Strange thing is it still gave me an error and told me it was not successful. Below is the log file - so even though it worked, aside from the DMA thing, can you tell me what it thinks did not work?Nero Serial Removed*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 6:33:44 PM
Nero API version: 6.3.1.19
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-710A> Version: BY03 - HA 0 TA 1 - 6.3.1.19
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI


=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6Y080M0 atapi Port 1 ID 0 DMA: On


=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 D: CDRom0
SONY DVD RW DRU-710A E: CDRom1
=======================


AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514124kB)
Free physical memory: 183MB (187552kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)


4.8.2005
NeroAPI
4:52:04 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

4:52:04 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

4:52:04 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

4:52:05 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

4:52:05 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

4:52:05 PM #6 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-710A running

4:52:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:52:05 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:52:05 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

4:52:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2264447 (503:12.47, 4422MB)

4:52:05 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

4:52:05 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

4:52:05 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:52:05 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2264448 (2264448) = #2264448/503:12.48
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264448 blocks [SONY DVD RW DRU-710A ]
--------------------------------------------------------------

4:52:05 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4637589504, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2264448 | lead-out | 1 | 0x00 | 0x41

4:52:05 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

4:52:05 PM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

4:52:05 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

4:52:05 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

4:52:05 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:52:05 PM #21 Text 0 File DVDR.cpp, Line 1932
Recording mode: Sequential Recording Mode

4:52:05 PM #22 Text 0 File Mmc.cpp, Line 20464
Set BUFE: Power-Burn -> ON , Generic write control : ON

4:52:05 PM #23 Text 0 File DVDR.cpp, Line 2073
Start write address at LBA 0
DVD high compatibility mode: Yes

4:52:05 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:52:05 PM #25 Text 0 File DVDR.cpp, Line 4817
Drive: SONY DVD RW DRU-710A
Book Type request: DVD-ROM
Changing the book type was finished with error code: 0

4:52:56 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
16:52:56.750 - SONY DVD RW DRU-710A\H0 T1 : Queue again later

5:38:36 PM #27 Text 0 File WriterStatus.cpp, Line 115
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2264448 (228D80h), lenght 0 blocks

5:38:36 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:38:36 PM #29 Text 0 File DVDR.cpp, Line 2315
EndDAO: Last written address was 2264447

5:40:28 PM #30 SCSI -1194 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04

5:40:28 PM #31 CDR -1194 File ThreadedTransferInterface.cpp, Line 1708
PMA update failure

5:40:28 PM #32 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once

5:40:28 PM #33 Text 0 File DVDR.cpp, Line 2315
EndDAO: Last written address was -1

5:40:28 PM #34 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2x (2,770 KB/s)

5:40:28 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

5:40:28 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)


Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ewanioc is offline   Reply With Quote
Old 6 Aug 2005, 12:37 AM   #5
Digital Video Technician
Digital Video Technician
 
Join Date: Mar 2004
Posts: 466
Default

One thing that pops up on each log, beside the DMA is your media:
Disc Manufacturer: CMC MA - G. AM3
Your setup does not seem to like these. See Columbo's sig. for a link to
check on your blank media's compatability.
lgha is offline   Reply With Quote
Old 6 Aug 2005, 04:37 AM   #6
Demigod of Digital Video
 
LT. Columbo's Avatar
 
Join Date: Nov 2004
Location: Los Angeles, CA
Posts: 10,671
Default

"PMA update failure"

"Book Type request: DVD-ROM
Changing the book type was finished with error code: 0"

you cannot do this with the media you are using.

DMA is still off, since you are having trouble you can download and install dvdfab decrypter---it has a feature that will enable DMA for you.
LT. Columbo is offline   Reply With Quote
Old 6 Aug 2005, 02:47 PM   #7
Platinum Member
Platinum Member
 
Join Date: Aug 2005
Posts: 150
Default

@ewanioc

Hi!

Regarding PMA update failure, look at this post

pma Failure
ashes is offline   Reply With Quote
Old 6 Aug 2005, 04:20 PM   #8
Not a god of digital video
 
blutach's Avatar
 
Join Date: Oct 2004
Location: is everything!
Posts: 24,628
Default

Please ditch the CMC's - they are just garbage. It's not the brand of disk that matters, but the media code and yours is CMC. Those 2 brands, although well known, have quality that varies greatly with the actual media.

Invest in better media. Read media quality in my signature.

Regards
__________________
Les

Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

Explore the sites and the programs - there's a gold mine of information in them

Don't forget to play the Digital Digest Quiz!!! (Click here)

blutach is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT +10. The time now is 05:09 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright © 1999 - 2011 Digital Digest

Visit DivXLand   Visit dvdloc8.com