Tweet
Verbatim 8x DL dvd +r, [MKM-001], made in Singapore, Burned @ 4X with NEC3550A {1Y6}
ImgBurn Log: (with verification)
Scanned @ 8X with NEC3550:
PS: Note=> There is definitely something wrong with the write strategy on the 2nd half of the DL burn. Look at the different strategies at different speeds on the second half.
EDIT: My buffer was bouncing as ImgBurn was having problems maintaining 4X in speed. It was as low as 3.1X and highest was 4.1X
ImgBurn Log: (with verification)
Code:
I 10:37:08 ImgBurn Version 2.1.0.0 started! I 10:37:08 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 10:37:08 Drive H:\ (FAT32) does not support single files > 4 GB I 10:37:08 Initialising SPTI... I 10:37:08 Searching for SCSI / ATAPI devices... I 10:37:08 Found 3 DVD-ROMs, 1 DVD±RW and 1 DVD±RW/RAM! I 10:42:20 Operation Started! I 10:42:20 Source File: C:\Decrypted Movies\FD_3-ISO\FINAL_DESTINATION_3.MDS I 10:42:20 Source File Sectors: 4,017,384 (MODE1/2048) I 10:42:20 Source File Size: 8,227,602,432 bytes I 10:42:20 Source File Volume Identifier: FINAL_DESTINATION_3 I 10:42:20 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 10:42:20 Source File File System(s): ISO9660, UDF (1.02) I 10:42:20 Destination Device: [3:0:0] _NEC DVD_RW ND-3550A 1.Y6 (E:) (ATA) I 10:42:20 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x) I 10:42:20 Destination Media Sectors: 4,173,824 I 10:42:20 Write Mode: DVD I 10:42:20 Write Type: DAO I 10:42:20 Write Speed: 4x I 10:42:20 Link Size: Auto I 10:42:20 Test Mode: No I 10:42:20 BURN-Proof: Enabled I 10:42:21 Optimal L0 Data Zone Capacity: 2,080,208 I 10:42:21 Optimal L0 Data Zone Method: Copied From Original Disc I 10:42:48 Filling Buffer... I 10:43:12 Writing LeadIn... I 10:43:14 Writing Image... I 10:43:14 Writing Layer 0... (LBA: 0 - 2080207) I 10:55:46 Writing Layer 1... (LBA: 2080208 - 4017383) I 11:07:58 Synchronising Cache... I 11:07:59 Closing Track... I 11:08:20 Finalising Disc... I 11:10:03 Image MD5: 83288fb7169b759f7e69a0e1a458b639 I 11:10:04 Operation Successfully Completed! - Duration: 00:27:43 I 11:10:04 Average Write Rate: 5,417 KB/s (3.9x) - Maximum Write Rate: 5,933 KB/s (4.3x) I 11:10:04 Cycling Tray before Verify... I 11:10:30 Device Ready! I 11:10:30 Operation Started! I 11:10:30 Source Device: [3:0:0] _NEC DVD_RW ND-3550A 1.Y6 (E:) (ATA) I 11:10:30 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x) I 11:10:30 Image File: C:\Decrypted Movies\FD_3-ISO\FINAL_DESTINATION_3.MDS I 11:10:30 Image File Sectors: 4,017,384 (MODE1/2048) I 11:10:30 Image File Size: 8,227,602,432 bytes I 11:10:30 Image File Volume Identifier: FINAL_DESTINATION_3 I 11:10:30 Image File Implementation Identifier: Daikin U.S. Comtec Lab I 11:10:30 Image File File System(s): ISO9660, UDF (1.02) I 11:10:30 Read Speed: MAX I 11:10:31 Verifying Sectors... I 11:29:21 Device MD5: 83288fb7169b759f7e69a0e1a458b639 I 11:29:21 Device (Padded) MD5: 1fe785422342ceecad57e1139f97e39f I 11:29:21 Image MD5: 83288fb7169b759f7e69a0e1a458b639 I 11:29:25 Operation Successfully Completed! - Duration: 00:18:50 I 11:29:25 Average Verify Rate: 7,110 KB/s (5.1x) - Maximum Verify Rate: 10,108 KB/s (7.3x)
PS: Note=> There is definitely something wrong with the write strategy on the 2nd half of the DL burn. Look at the different strategies at different speeds on the second half.
EDIT: My buffer was bouncing as ImgBurn was having problems maintaining 4X in speed. It was as low as 3.1X and highest was 4.1X
Comment