Nero buffer level stays at 0% when burning DVD

[alexlane]

I am a rookie so please hang in here with me. I have read numerous forums and tried to resolve this issue but now I have no choice but to post my problem. I have burned about 3 DVD's with DVD SHRINK and NERO (version 6) and did not have any problem. Now, all of a sudden I go through the process with SHRINK then to NERO and everything seems fine until I put the blank DVD in. Everythign fires up like normal and the DVD spins fast but the buffer level never picks up and the DVD will spin very fast then slow down over and over unless you abort it. I have read that it could be from using cheap DVD's but I bought verbatim's last night that still would not work. If anyone can help I would greatly appreciate it!!!!!!! THANKS!!!!!!!!!!!

[Chewy]

welocme to the forum

post your nero log, the one at the bottom

http://forum.digital-digest.com/showthread.php?t=57213

[alexlane]

THANK you very much!!!!!!

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\NERO\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
Nero API version: 6.3.1.26
Using interface version: 6.3.1.4
Installed in: C:\NERO\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 0 TA 0 - 6.3.1.26
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : ST380817AS nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : ST380817AS nvatabus Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 433MB (443612kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.12.2005
NeroAPI
12:42:03 AM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

12:42:03 AM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

12:42:03 AM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

12:42:11 AM #4 Text 0 File Reader.cpp, Line 126
Reader running

12:42:11 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12:42:11 AM #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1693S running

12:42:11 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:42:11 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:42:11 AM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media

12:44:54 AM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

12:44:54 AM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

12:44:54 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

12:44:54 AM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

12:44:54 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

12:44:54 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286144 | lead-out | 1 | 0x00 | 0x41

12:44:54 AM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

12:44:54 AM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

12:44:54 AM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

12:44:54 AM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 16x (22,160 KB/s)

12:44:54 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:44:54 AM #21 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

12:44:54 AM #22 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

12:51:08 AM #23 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1693S> start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks

12:51:08 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:51:30 AM #25 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 16x (22,160 KB/s)

12:51:31 AM #26 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

12:51:31 AM #27 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 2, 3, size=99568 bytes, created 3/24/2004 5:44:50 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 2, 3, size=27664 bytes, created 3/24/2004 5:45:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 2, 3, size=9561 bytes, created 3/24/2004 5:45:02 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[22.12.2005]------------------------------------
00:42:11 Robot error messages from:
====== *** NeroAPI, History File *** ======
Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\NERO\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
Nero API version: 6.3.1.26
Using interface version: 6.3.1.4
Installed in: C:\NERO\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 0 TA 0 - 6.3.1.26
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : ST380817AS nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : ST380817AS nvatabus Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 459MB (471000kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.12.2005
NeroAPI
7:19:43 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

7:19:44 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

7:19:44 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

7:19:47 PM #4 Text 0 File Reader.cpp, Line 126
Reader running

7:19:47 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

7:19:47 PM #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1693S running

7:19:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:19:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:19:47 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media

9:46:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

9:46:17 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

9:46:17 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

9:46:17 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

9:46:17 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

9:46:17 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

9:46:17 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

9:46:18 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

9:46:18 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

9:46:18 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 16x (22,160 KB/s)

9:46:18 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:46:18 PM #21 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

9:46:18 PM #22 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

9:48:19 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00C20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

9:48:19 PM #24 CDR -1106 File Writer.cpp, Line 304
Power calibration error

9:48:19 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

9:48:19 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

9:48:19 PM #27 Phase 127 File APIProgress.cpp, Line 273
Generating DVD high compatibility borders

9:48:19 PM #28 Phase 129 File APIProgress.cpp, Line 273
Generating DVD borders completed successfully

9:48:19 PM #29 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 16x (22,160 KB/s)

9:48:19 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

9:48:19 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 2, 3, size=99568 bytes, created 3/24/2004 5:44:50 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 2, 3, size=27664 bytes, created 3/24/2004 5:45:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 2, 3, size=9561 bytes, created 3/24/2004 5:45:02 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[23.12.2005]------------------------------------
19:19:47 Robot error messages from:
====== *** NeroAPI, History File *** ======
Alex Lane
AML Properties LLC
Nero Serial Removed*

[LT. Columbo]

tons of problems in that log. In my opinion the burn speed and DMA issue alone are the problem, but you should correct everything you can.

CdRomPeripheral : LITE-ON DVDRW SOHW-1693S nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : ST380817AS nvatabus Port 2 ID 0 DMA: OffDiskPeripheral : ST380817AS nvatabus Port 2 ID 2 DMA: Off

DMA is off

http://forum.digital-digest.com/showthread.php?s=&threadid=44808

why this may have happened:

http://www.michna.com/kb/WxDMA.htm

6.3.1.26

nero update

http://ww2.nero.com/nero6/us/nero-up.php

9:48:19 PM #29 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 16x (22,160 KB/s)

burn speed down to 4x

Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 2, 3, size=99568 bytes, created 3/24/2004 5:44:50 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 2, 3, size=27664 bytes, created 3/24/2004 5:45:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 2, 3, size=9561 bytes, created 3/24/2004 5:45:02 PM (InCD4 driver for win NT/2K/XP)

get rid of incd with the clean tool.

http://www.nero.com/eng/Clean_Tools.html

Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04

update that old firmware to KS0B here:

http://forum.rpc1.org/dl_firmware.php?download_id=2056

Disc Manufacturer ID: CMC MAG

be warned many people have trouble with this media. i suggest something like sony or verbatim as described in TGROB

http://forum.digital-digest.com/showthread.php?s=&threadid=49635

put on a pot of coffee and get to work, let us know how it goes

[Chewy]

Looks like the worst case of NForce drivers hosing a bus I have seen yet!



But I wish I had bought one of those dvd burners before they sold out.


I would like to see the log at the bottom with a verbatim not working with a slower burn speed

[blutach]

@Looie - TGROB indeed.

Regards

[alexlane]

Wow I have plenty of work to do. Thanks for the help. I will continue to do what you said and let you know.

So Chewy, what exactly does "Looks like the worst case of NForce drivers hosing a bus I have seen yet!" mean. Actually I built this PC with a buddy but do not know too much about them. Thanks again for all of your help!

[Chewy]

Actually I built this PC with a buddy but do not know too much about them.

Been there done that!

If you flash that burner and still have those buggy nvidia ide drivers loaded,
be sure and do it in safe mode(PIO) mode.

In a nutshell you loaded drivers meant for XP/W2K not XPSP2.

This is what a good log has:

Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3520AW atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 1 DMA: On
DiskPeripheral : ST3120827AS 3.42 viasraid Port 2 ID 0 DMA: Off

compare to yours, I try hard to make coasters(in the interest of science),
never works.

[Chewy]

for example! this burn was 4 gigs in 5min 15 seconds
a similar burn on my nforce system with nvidia ide drivers loaded might take 15-20 minutes


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <_NEC DVD_RW ND-3520AW>Version: 2.U2 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3520AW atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 1 DMA: On

Physical memory : 510MB (523056kB)
Free physical memory: 265MB (271896kB)
Memory in use : 48


Writer HL-DT-ST DVDRAM GSA-4163B running

5:18:40 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)


Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2076287 (461:23.62, 4055MB)


Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0

5:18:40 AM #22 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

5:18:40 AM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM

Burn process completed successfully at 16x (22,160 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[Chewy]

and just to verify that last burn I did a quality scan, very good blank!

[alexlane]

OK now that I have time I have set my mind to fix this. How could it just go from working to not working. I have had this PC for about 8 months and never had a problem with burning DVD's. CD's work fine still bit the DVD's do not work. I am going down the list of things that were recommended.

OK when I try to turn the DMA on I am following the directions on the link. I click on IDE ATA/ATAPI controllers: I have 3 things there which are: (2) nvidia CK804 ADMA Controller (v2.7) and (1) NVIDIA CK804 Parallell ATA Controller (v2.7). I do not have the advanced option to turn this DMA to the correct one. Any ideas???

[alexlane]

BY THE WAY: THANKS for all of your help. I really do appreciate everyones time and patience with this. I could not do it alone. This forum is really awesome and is extremely helpful. Thanks again!!!!!!!!!!!!!!!

[Chewy]

you can roll back the driver for the ide to ms default or go here and upgrade
your nforce driver

http://www.nvidia.com/content/drivers/drivers.asp

[alexlane]

Ok I have done everything that it will allow me to do. Here is the most recent log I have. I tried to update the NVIDIA drivers but it tells me that I cannot use those drivers because I do not have the XP 64. Is anythign I am doing working? THANKS!!!


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\NERO\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : ST380817AS nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : ST380817AS nvatabus Port 2 ID 2 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 602MB (616560kB)
Memory in use : 41
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.2.2006
Burn DVD Image
11:03:55 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

11:03:55 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

11:03:55 PM #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running

11:03:55 PM #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

11:04:27 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286040 (508:00.40, 4464MB)

11:04:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

11:04:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

11:04:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)

11:04:27 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286041 (2286041) = #2286041/508:0.41
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286041 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

11:04:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681811968, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286041 | lead-out | 1 | 0x41 | 0x00

11:04:27 PM #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:04:27 PM #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:04:27 PM #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

11:04:28 PM #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

11:04:28 PM #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

11:04:28 PM #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 6x (8,310 KB/s)

11:04:28 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:04:28 PM #18 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

11:04:28 PM #19 Text 0 File DVDR.cpp, Line 6036
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0

11:04:28 PM #20 CDR -1207 File DVDR.cpp, Line 5463
Book Type automatically set to: DVD-ROM

11:04:28 PM #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

11:05:41 PM #22 SPTI -1106 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x09220000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

11:05:41 PM #23 CDR -1106 File Writer.cpp, Line 311
Power calibration error
E: LITE-ON DVDRW SOHW-1693S

11:05:41 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:05:41 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:05:41 PM #26 Phase 127 File dlgbrnst.cpp, Line 1685
Generating DVD high compatibility borders

11:05:41 PM #27 Phase 129 File dlgbrnst.cpp, Line 1685
Generating DVD borders completed successfully

11:05:41 PM #28 Text 0 File DVDR.cpp, Line 6036
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD+R
Changing the Book Type was finished successfully, return code 0

11:05:41 PM #29 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 6x (8,310 KB/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[Chewy]

then why didn't you do this?

you can roll back the driver for the ide to ms default