Test burn with Imgburn

[Jensen]

OK I understand that the test burn takes about the same time as a real burn just without the laser. Is the amount of time taken to to do these processes determined by the hardware or software??

UPDATE......... this test burn was 2hrs 10mins
is this normal?

[NightTran]

I am sure that is not normal you may want to post your log so Chewy can take a look

[Jensen]

I 15:09:35 ImgBurn Version 2.3.2.0 started!
I 15:09:35 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 15:09:35 Total Physical Memory: 523,760 KB - Available: 162,648 KB
I 15:09:35 Initialising SPTI...
I 15:09:35 Searching for SCSI / ATAPI devices...
I 15:09:35 Found 1 CD-ROM and 1 CD-RW!
W 15:09:37 Device Arrival Detected!
I 15:09:37 Searching for SCSI / ATAPI devices...
I 15:09:37 Found 1 CD-ROM, 1 CD-RW and 1 DVD±RW/RAM!
I 15:10:53 Operation Started!
I 15:10:53 Building Image Tree...
I 15:11:48 Checking Directory Depth...
I 15:11:48 Calculating Totals...
I 15:11:48 Preparing Image...
I 15:11:48 Checking Path Length...
I 15:11:48 Image Size: 4,394,254,336 bytes
I 15:11:48 Image Sectors: 2,145,632
I 15:12:06 Operation Successfully Completed! - Duration: 00:01:12
I 15:12:06 Operation Started!
I 15:12:06 Source File: -==/\/[BUILD IMAGE]\/\==-
I 15:12:06 Source File Sectors: 2,145,632 (MODE1/2048)
I 15:12:06 Source File Size: 4,394,254,336 bytes
I 15:12:06 Source File Volume Identifier: fmad1
I 15:12:06 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!
I 15:12:06 Source File Implementation Identifier: ImgBurn
I 15:12:06 Source File File System(s): ISO9660, UDF (1.02)
I 15:12:06 Destination Device: [0:0:0] MAD DOG TF-DVDRW TSH652D MD00 (F (USB)
I 15:12:06 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 4x, 8x, 12x, 16x)
I 15:12:06 Destination Media Sectors: 2,297,888
I 15:12:06 Write Mode: DVD
I 15:12:06 Write Type: DAO
I 15:12:06 Write Speed: MAX
I 15:12:06 Link Size: Auto
I 15:12:06 Test Mode: Yes
I 15:12:06 BURN-Proof: Enabled
I 15:12:07 Filling Buffer... (20 MB)
I 15:12:08 Writing LeadIn...
I 15:12:33 Writing Image... (LBA: 0 - 2145631)
I 17:21:43 Synchronising Cache...
I 17:22:09 Cycling Tray after Test Write...
I 17:22:13 Image MD5: bc9Nero Serial Removed3
I 17:22:14 Operation Successfully Completed! - Duration: 02:10:06
I 17:22:14 Average Write Rate: 553 KB/s (0.4x) - Maximum Write Rate: 839 KB/s (0.6x)

[NightTran]

I think that you burn with the external burner and your USB is USB1 Chewy can confirm this

[Jensen]

yes Im still waiting on usb 2.0 pci adapter in the mail. Do you think thats the only reason?

[NightTran]

nope I afraid not, you use Media Type: DVD-R (Disc ID: RITEKF1), and Write Speed: MAX, Chewy can tell you more about your burner

[Jensen]

Im using the wrong disks???

[Chewy]

those disks are a problem especially with that burner?

wait till you get the usb2 card and try a burn, go ahead and try now anyway

no big loss since ritekf1's are so iffy

[Jensen]

I need a education on dvd-r +r dl
I looked at the "FAQ: The Golden Rules of Burning" authored by Blutach and learned quite a bit. But when is a good time to use these discs, I already made a mistake and listened to the radioshack guys and bought 50 of these (go ahead laugh lol) So what I would like to know, whats best for what??

[Chewy]

If I might add to what night and blu have already, I suspect your firmware is part of the problem,

January 2007 MegaSTOR 18x Triple Format INTERNAL and EXTERNAL TS-H652D_MD01.zip

http://www.mdmm.com/optical_storage_drivers.php

http://www.videohelp.com/dvdwriters/...-ts-h652d/1608

that's a good burner in general, with that mad dog firmware it's an unknown

[Jensen]

So I have come to the conclusion that imgburn works best for dvd+r.... and that all dvd-r will be written as dao.

I got my hands on a maxell dvd+rw disc to try and get this done. heres a partial log.


I 23:05:41 Source File Implementation Identifier: ImgBurn
I 23:05:41 Source File File System(s): ISO9660, UDF (1.02)
I 23:05:41 Destination Device: [0:0:0] MAD DOG TF-DVDRW TSH652D MD01 (F (USB)
I 23:05:41 Destination Media Type: DVD+RW (Disc ID: RICOHJPN-W11-01) (Speeds: 2.4x, 4x)
I 23:05:41 Destination Media Sectors: 2,295,104
I 23:05:41 Write Mode: DVD
I 23:05:41 Write Type: DAO
I 23:05:41 Write Speed: 8x
I 23:05:41 Link Size: Auto
I 23:05:41 Test Mode: No
I 23:05:41 BURN-Proof: Enabled

what should I be doing differently with this disc???

Blutach- you mentioned Verbatim or the Taiyo Yuden media dvd+r for burning right? What characteristics of these discs do you recommend? +RW or just +R? 8x or lower?


edit- new log error

I 23:37:09 Average Write Rate: 5,413 KB/s (3.9x) - Maximum Write Rate: 5,734 KB/s (4.1x)
I 23:37:09 Cycling Tray before Verify...
W 23:37:16 Waiting for device to become ready...
I 23:37:31 Device Ready!
I 23:37:31 Operation Started!
I 23:37:31 Source Device: [0:0:0] MAD DOG TF-DVDRW TSH652D MD01 (F (USB)
I 23:37:31 Source Media Type: DVD+RW (Book Type: DVD+RW) (Disc ID: RICOHJPN-W11-01) (Speeds: 2.4x, 4x)
I 23:37:31 Image File: -==/\/[BUILD IMAGE]\/\==-
I 23:37:31 Image File Sectors: 2,146,560 (MODE1/2048)
I 23:37:31 Image File Size: 4,396,154,880 bytes
I 23:37:31 Image File Volume Identifier: Full Metal Alchemist
I 23:37:31 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!
I 23:37:31 Image File Implementation Identifier: ImgBurn
I 23:37:31 Image File File System(s): ISO9660, UDF (1.02)
I 23:37:31 Verifying Sectors... (LBA: 0 - 2146559)
W 23:41:09 Failed to Read Sector 0 - Logical Block Address out of Range
E 23:41:20 Failed to Verify Sectors!
E 23:41:20 Operation Failed! - Duration: 00:03:48
I 23:41:20 Average Verify Rate: 0 KB/s (0.0x) - Maximum Verify Rate: 6 KB/s (0.0x)


corrupt source??


[code]
DVD Flick error log
Error number 0 from :
*** Project info
EncodingProfile 2
ThreadCount 1
TwoPassEncode 0
OverScan 0, 2.2
- skip to the end-


*** Project destination folder
0.0.ac3 32849664 Nero ShowTime File
0.0.m2v 836328420 Nero ShowTime File
1.0.ac3 29960448 Nero ShowTime File
1.0.m2v 762583630 Nero ShowTime File
2.0.ac3 32898048 Nero ShowTime File
2.0.m2v 837999805 Nero ShowTime File
3.0.ac3 32908032 Nero ShowTime File
3.0.m2v 837979423 Nero ShowTime File
4.0.ac3 32904192 Nero ShowTime File
4.0.m2v 838509374 Nero ShowTime File
dvdauthor.txt 63615 Text Document
dvdauthor.xml 1693 XML Document
dvdflick.log 11840 Text Document
errorlog.txt 30661 Text Document
ffmpeg_audio_title0_track0_source0.txt 11011 Text Document
ffmpeg_audio_title1_track0_source0.txt 9985 Text Document
ffmpeg_audio_title2_track0_source0.txt 10923 Text Document
ffmpeg_audio_title3_track0_source0.txt 10781 Text Document
ffmpeg_audio_title4_track0_source0.txt 11080 Text Document
ffmpeg_video_title0_source0_pass0.txt 200871 Text Document
ffmpeg_video_title1_source0_pass0.txt 172357 Text Document
ffmpeg_video_title2_source0_pass0.txt 204010 Text Document
ffmpeg_video_title3_source0_pass0.txt 193572 Text Document
ffmpeg_video_title4_source0_pass0.txt 204776 Text Document
imgburn.txt 1612 Text Document
tcmplex_title0.txt 21428 Text Document
tcmplex_title1.txt 21421 Text Document
tcmplex_title2.txt 21428 Text Document
tcmplex_title3.txt 21428 Text Document
tcmplex_title4.txt 21428 Text Document
title0.mpg 893587456 ATI File Player
title1.mpg 814569472 ATI File Player
title2.mpg 895168512 ATI File Player
title3.mpg 895127552 ATI File Player
title4.mpg 895232000 ATI File Player
*** Drives
C -
DriveType 2
FileSystem NTFS
AvailableSpace 3328 <--- its this right
FreeSpace 3328
TotalSize 38154
D - not ready

AM I

[blutach]

Nothing to do with the source. It's not reading the disk back on verify. I used to use those RICOHJPN W011 RWs - they were pretty good but had a poor life.

I also wonder why you are burning (or trying to burn) a disk rated at 4x at 8x? Especially over USB, which is iffy at best. Slow down over USB! Or as said in other threads you have started, move the drive to an IDE channel. As well, the drive is not the bgreatest in the world either.

For media, I'd buy some Verbatim MCC003/004 or Taiyo Yuden TYG02.

There's no need for RWs unless you are burning stuff temporarily.

Regards

[Jensen]

I haven't taken the time to install the drive inside yet, not sure if the connector is right, I did notice the burn speed, after reading the log several times and looking at imgburn stats right side of screen. Thank you for your media suggestion. I have heard of an issue with the PS3 and the ac3 code. Is there another audio code to burn with ?? Or do you stand by media will probably fix this? And if what good are these discs I already have? Data storage?

in imgburn log says

I 04:46:49 Write Mode: DVD
I 04:46:49 Write Type: DAO

is this write for what Im doing


Ok I was looking into verbatim and 1st I couldnt find mcc 003/004 listed nexted to any of the disc pakages (online) 2nd I live on an island in Hawaii, shipping for a pack of 50 is $22 . I looked earlier @ circuit city and best buy and they didnt even know what I was talking about. Ofcourse niether did I. I think I kept saying "verbigium" I couldnt remember it lol. Ill have to find a specialty store and pay extra no-doubt.

[Chewy]

bestbuy(I checked honolulu) has verbatim 16x dvd+r for 12$ a 50 pack today

they will be mcc004

[Jensen]

Cool, Ill check them again tomorrow. I was already on that side of the island earlier, I was able to get the dvd-r to work for both players. 1 issue is the ps3 freezes at 10x forward, and wont skip to the next title. However it will play thru to it, and >>@1.5x which is interesting since everything works for the reg. dvd player. any thoughts? Im a thinkin media.