Buffer Level stays 0% and the burn fails (DVDs Only)

XBlue · 19 Apr 2008, 09:49 PM

My DVD is LG GSA H10N and Buffer Level stays 0% and the burn fails (DVDs Only) it works some times and before it always worked i don't know what is the diffrence from the begining and now sooo i neeed Help MY loG is here

====== *** Nero-Burning Rom, History File *** ======
XBluE
XBluE_TeC.
Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 12/19/2005 10:16:04 AM
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 0 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 0 TA 0 - 6.6.0.19
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200BB-00FTA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : KC3602N EGK835Q 1.0 dtscsi Port 4 ID 0 DMA: Off
CdRomPeripheral : KC3602N EGK835Q 1.0 dtscsi Port 4 ID 1 DMA: Off
CdRomPeripheral : KC3602N EGK835Q 1.0 dtscsi Port 4 ID 2 DMA: Off
CdRomPeripheral : KC3602N EGK835Q 1.0 dtscsi Port 4 ID 3 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H10N H: CDRom0
KC3602N EGK835Q I: CDRom1
KC3602N EGK835Q J: CDRom2
KC3602N EGK835Q K: CDRom3
KC3602N EGK835Q L: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 549MB (562380kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.4.2008
CD-ROM (ISO)
2:44:21 PM #1 Text 0 File Isodoc.cpp, Line 6368
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

2:44:21 PM #2 Text 0 File Burncd.cpp, Line 2948
HL-DT-ST DVDRAM GSA-H10N
Buffer underrun protection activated

2:44:21 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

2:44:21 PM #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running

2:44:21 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

2:44:21 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

2:44:21 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 330521 ( 73:28.71)

2:44:21 PM #8 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)

2:44:21 PM #9 Text 0 File DlgWaitCD.cpp, Line 2489
Recorder: HL-DT-ST DVDRAM GSA-H10N;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

2:44:21 PM #10 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:44:21 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 330522 (330522) = #330522/73:26.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 330520 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------

2:44:21 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 677216256, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
330522 | lead-out | 1 | 0x41 | 0x00

2:44:21 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 330522 -> 330520.

2:44:21 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

2:44:23 PM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

2:44:23 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

2:44:23 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)

2:44:23 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:44:23 PM #19 Text 0 File Mmc.cpp, Line 21820
Set BUFE: Buffer underrun protection -> ON

2:47:13 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

2:47:18 PM #21 Text 0 File Mmc.cpp, Line 16498
<HL-DT-STDVDRAM GSA-H10N > start Close Session

2:47:35 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
XBluE
XBluE_TeC.
Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 12/19/2005 10:16:04 AM
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 0 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 0 TA 0 - 6.6.0.19
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200BB-00FTA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : KC3602N EGK835Q 1.0 dtscsi Port 4 ID 0 DMA: Off
CdRomPeripheral : KC3602N EGK835Q 1.0 dtscsi Port 4 ID 1 DMA: Off
CdRomPeripheral : KC3602N EGK835Q 1.0 dtscsi Port 4 ID 2 DMA: Off
CdRomPeripheral : KC3602N EGK835Q 1.0 dtscsi Port 4 ID 3 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H10N H: CDRom0
KC3602N EGK835Q I: CDRom1
KC3602N EGK835Q J: CDRom2
KC3602N EGK835Q K: CDRom3
KC3602N EGK835Q L: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 570MB (584564kB)
Memory in use : 44
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.4.2008
ISO compilation
3:47:45 PM #1 Text 0 File Isodoc.cpp, Line 6368
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

3:47:45 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

3:47:45 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

3:47:45 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

3:47:46 PM #5 Phase 167 File dlgbrnst.cpp, Line 1832
Not able to write Disc-at-once on an open disc.

3:47:46 PM #6 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD DVD)

3:47:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 2489
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

3:47:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**blutach** · 19 Apr 2008, 09:56 PM

Try a firmware update - http://forum.rpc1.org/dl_firmware.php?download_id=2238

Regards

XBlue · 19 Apr 2008, 10:10 PM

Quote:

Originally Posted by blutach

Try a firmware update - http://forum.rpc1.org/dl_firmware.php?download_id=2238

Regards

i already got one but i'm afraid to open it it's my first time (I Can do it ) but can i ask u is there is any thing else u can c in the log :$

soup · 19 Apr 2008, 11:45 PM

Felt exactly the same way about 2 & a half years ago when I flashed my first drive, (LG 4163B), scared to death. I had just got the computer & the drive, brand spanking new. Thanks to a few people here, flashed the drive in safe mode after making sure there was no discs in the drive. If you follow the instructions & make sure you choose the right drive you should be okay, but there are no guarantees. Something you could try to take Nero out of the equation is use ImgBurn, it does create a log also, so if it fails you could also post that. The more info, the more your chances of getting this solved. If you use ImgBurn I would try an 8X burn.

http://www.imgburn.com/

bo_something · 20 Jul 2008, 12:57 AM

Sorry its off topic i know

I have a burnt PCB card on my western digital 120gb drive model (WD1200BB-00FTA0)

I am desperately looking for a replacement, I noticed you have the same model, the only way to restore my files is to replace my burnt pcb on the drive with the exact same pcb (it has to be the same model)

I Would you like us to make a deal, I'll buy you a 500GB drive and ship it to your home, in exchange for the PCB card.

What do you think ? Thanks

19 Apr 2008, 09:56 PM	Link #2
blutach Not a god of digital video Join Date: Oct 2004 Location: is everything! Posts: 24,627	Try a firmware update - http://forum.rpc1.org/dl_firmware.php?download_id=2238 Regards __________________ Les *Essential progs -* [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn] *Media and Burning -* [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc] [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility] *Cool Techniques -* [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips] *Real useful info -* [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs] You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service. Explore the sites and the programs - there's a gold mine of information in them *Don't forget to play the Digital Digest Quiz!!! (Click here)*

19 Apr 2008, 11:45 PM	Link #4
soup Just Trying To Help Join Date: Nov 2005 Location: Canada Region 1 Posts: 7,517	Felt exactly the same way about 2 & a half years ago when I flashed my first drive, (LG 4163B), scared to death. I had just got the computer & the drive, brand spanking new. Thanks to a few people here, flashed the drive in safe mode after making sure there was no discs in the drive. If you follow the instructions & make sure you choose the right drive you should be okay, but there are no guarantees. Something you could try to take Nero out of the equation is use ImgBurn, it does create a log also, so if it fails you could also post that. The more info, the more your chances of getting this solved. If you use ImgBurn I would try an 8X burn. http://www.imgburn.com/ __________________

20 Jul 2008, 12:57 AM	Link #5
bo_something Junior Member Join Date: Jul 2008 Posts: 1	Sorry its off topic i know I have a burnt PCB card on my western digital 120gb drive model (WD1200BB-00FTA0) I am desperately looking for a replacement, I noticed you have the same model, the only way to restore my files is to replace my burnt pcb on the drive with the exact same pcb (it has to be the same model) I Would you like us to make a deal, I'll buy you a 500GB drive and ship it to your home, in exchange for the PCB card. What do you think ? Thanks Last edited by bo_something; 20 Jul 2008 at 12:59 AM

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Buffer Level (HELP!!!!!)	proboller86	Blank Media and Burning	18	8 Aug 2007 11:20 AM
Nero buffer level stays at 0% when burning DVD	alexlane	Nero Recode	22	13 Feb 2006 02:52 PM
Buffer level	civilforce	Blank Media and Burning	33	28 Dec 2005 11:42 PM
Buffer Level Jumping...please help	sdstephens74	General Discussions	17	18 Sep 2005 05:37 AM
DVD Decrypter (write mode) buffer fails	conan	Blank Media and Burning	3	4 Dec 2003 03:11 PM