Windows 2000 5.0 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM Nero version: 6.3.1.20 Recorder: Version: A104 - HA 1 TA 0 - 6.3.1.20 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: Version: 1.0 - HA 1 TA 1 - 6.3.1.20 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: On CdRomPeripheral : ASUS CRW-4816A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4081 H: CDRom3 ASUS CRW-4816A G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 38797312 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 239MB (245280kB) Free physical memory: 94MB (96876kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 31.8.2004 ISO compilation 9:42:25 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:42:25 PM #2 Text 0 File Reader.cpp, Line 126 Reader running 9:42:25 PM #3 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVDRAM GSA-4081B running 9:42:25 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:42:26 PM #5 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 9:42:26 PM #6 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 445839 ( 99:04.39, 870MB) 9:42:26 PM #7 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 9:42:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R Disc Manufacturer: TYG01 - Disc Application Code: 64, Disc Physical Code: 193 9:42:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:42:26 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 445840 (445840) = #445840/99:4.40 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 445840 blocks [HL-DT-ST DVDRAM GSA-4081B] -------------------------------------------------------------- 9:42:26 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 913080320, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 445840 | lead-out | 1 | 0x00 | 0x41 9:42:26 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 9:42:29 PM #13 Text 0 File Burncd.cpp, Line 4183 Cache writing successful. 9:42:29 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 9:42:29 PM #15 Phase 32 File dlgbrnst.cpp, Line 1855 Simulation started at 4x (5,540 KB/s) 9:42:29 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:42:29 PM #17 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 3:17,335 (197335ms) -> OK 9:42:29 PM #18 Text 0 File DVDR.cpp, Line 1942 Recording mode: Sequential Recording Mode 9:42:29 PM #19 Text 0 File Mmc.cpp, Line 20531 Set BUFE: supported -> ON 9:42:29 PM #20 Text 0 File DVDR.cpp, Line 2083 Start write address at LBA 0 DVD high compatibility mode: Yes 9:42:29 PM #21 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:42:32 PM #22 Text 0 File Cdrdrv.cpp, Line 1294 21:42:32.539 - HL-DT-ST DVDRAM GSA-4081B\H1 T0 : Queue again later 9:45:39 PM #23 Text 0 File WriterStatus.cpp, Line 115 start writing Lead-Out at LBA 445840 (6CD90h), lenght 0 blocks 9:45:40 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:45:40 PM #25 Text 0 File DVDR.cpp, Line 2325 EndDAO: Last written address was 445839 9:46:13 PM #26 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 9:46:13 PM #27 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 9:46:13 PM #28 Phase 33 File dlgbrnst.cpp, Line 1855 Simulation completed successfully at 4x (5,540 KB/s) 9:46:14 PM #29 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 4x (5,540 KB/s) 9:46:14 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:46:14 PM #31 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 3:17,335 (197335ms) -> OK 9:46:14 PM #32 Text 0 File DVDR.cpp, Line 1942 Recording mode: Sequential Recording Mode 9:46:14 PM #33 Text 0 File Mmc.cpp, Line 20531 Set BUFE: supported -> ON 9:46:14 PM #34 Text 0 File DVDR.cpp, Line 2083 Start write address at LBA 0 DVD high compatibility mode: Yes 9:46:14 PM #35 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 9CD8F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:46:25 PM #36 SCSI -1135 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06800000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x32 0x4D 0x03 0x0C 0x0C 0x00 9:46:25 PM #37 CDR -1135 File Writer.cpp, Line 304 Write error 9:46:25 PM #38 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:46:25 PM #39 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 9:46:25 PM #40 Text 0 File DVDR.cpp, Line 2325 EndDAO: Last written address was -1 9:46:25 PM #41 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 9:46:25 PM #42 CDR -1135 File WriterStatus.cpp, Line 164 Write error 9:46:25 PM #43 TRANSFER -24 File WriterStatus.cpp, Line 164 Could not perform end of Disc-at-once 9:46:25 PM #44 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 9:46:25 PM #45 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 12:05:04 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)