Mike Nero Serial Removed Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\NERO\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero version: 6.3.1.20 Recorder: Version: 0059 - HA 1 TA 1 - 6.3.1.20 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: Version: KPH9 - HA 1 TA 0 - 6.3.1.20 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON COMBO LTC-48161H atapi Port 1 ID 0 DMA: On CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON COMBO LTC-48161H F: CDRom0 DVDRW IDE1008 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 36700160 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 223MB (228844kB) Free physical memory: 129MB (132576kB) Memory in use : 42 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.10.2004 ===== Disc-Copy over image - 1st step : Copy to image ... 1:15:04 PM #1 Text 0 File Reader.cpp, Line 126 Reader running 1:15:04 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 1:15:04 PM #3 Text 0 File DVDCopy.cpp, Line 271 DVD Track-Information from source disc S01 T01 Con 0x04 Start 0 Len 2286112 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) 1:15:04 PM #4 Text 0 File DVDCopy.cpp, Line 374 Max -1 tracks of 1 allowed to copy 1: 0 - 2286112 = 2286112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 1:15:04 PM #5 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 1:15:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 2286111 (508:01.36, 4465MB) 1:15:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 1:15:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 1:15:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:15:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [ Image Recorder ] -------------------------------------------------------------- 1:15:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682264576, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286112 | lead-out | 1 | 0x00 | 0x41 1:15:04 PM #12 Phase 120 File dlgbrnst.cpp, Line 1855 Creating the image for burning 1:15:04 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:25:22 PM #14 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 1:25:22 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:25:23 PM #16 Phase 121 File dlgbrnst.cpp, Line 1855 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 1:25:39 PM #1 Text 0 File Reader.cpp, Line 126 Reader running 1:25:39 PM #2 Text 0 File Writer.cpp, Line 124 Writer DVDRW IDE1008 running 1:25:39 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 387297280 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:01.37 ( 2286112) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: 1:25:40 PM #4 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 1:25:42 PM #5 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 1:25:42 PM #6 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 1:25:42 PM #7 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: DVDRW IDE1008, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 1:25:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:25:43 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDRW IDE1008 ] -------------------------------------------------------------- 1:25:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [DVDRW IDE1008 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286112 | lead-out | 1 | 0x00 | 0x41 1:25:47 PM #11 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 8x (11,080 KB/s) 1:25:48 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:25:48 PM #13 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 1:25:48 PM #14 Text 0 File DVDR.cpp, Line 4915 Drive: DVDRW IDE1008 Book Type request: DVD-ROM Changing the book type was finished with error code: 0 1:25:48 PM #15 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 7:11,333 (431333ms) -> OK 1:25:48 PM #16 Text 0 File DVDPlusRW.cpp, Line 628 Start write address at LBA 0 DVD high compatibility mode: Yes 1:37:00 PM #17 Text 0 File WriterStatus.cpp, Line 115 start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 1:37:00 PM #18 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:38:01 PM #19 SCSI -1169 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 1:42:01 PM #20 CDR -1175 File Cdrdrv.cpp, Line 1246 Internal trace Resending of command failed after 240000ms CDB Data[hex]: 5B 01 06 00 00 00 00 00 00 00 00 00 1:42:01 PM #21 SCSI -1169 File Cdrdrv.cpp, Line 1247 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 1:42:15 PM #22 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 1:42:15 PM #23 Text 0 File DVDR.cpp, Line 4915 Drive: DVDRW IDE1008 Book Type request: DVD+R Changing the book type was finished with error code: 0 1:42:15 PM #24 CDR -1169 File ThreadedTransferInterface.cpp, Line 1708 Logical unit not ready, operation in progress DVDRW IDE1008\H1 T1 1:42:15 PM #25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708 Could not perform end of Disc-at-once 1:42:20 PM #26 Phase 127 File dlgbrnst.cpp, Line 1855 Generating DVD high compatibility borders 1:47:05 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 1:47:05 PM #28 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 1:47:05 PM #29 Phase 129 File dlgbrnst.cpp, Line 1855 Generating DVD borders completed successfully 1:47:05 PM #30 Text 0 File DVDR.cpp, Line 4915 Drive: DVDRW IDE1008 Book Type request: DVD+R Changing the book type was finished with error code: 0 1:47:05 PM #31 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 1:47:05 PM #32 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 10:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)