How to Use Nero InfoTool

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • jmet
    Super Moderator
    • Nov 2002
    • 8697

    How to Use Nero InfoTool

    Software you will need:
    1. <a href="http://www.nero.com/enu/downloads-infotools.html">Nero InfoTool</a>


    broken link

    new link

    ftp://ftp6.nero.com/tools/InfoTool.zip

    <hr>

    The Nero Info Tool utility retrieves your computer system information. This information includes system drives, operating system, drivers listing, etc. This program analyzes and displays the main characteristics of drives, disks and the installed software. This information can also be printed or saved to a text file.

    It can analyze and display important information about the media currently in the drive, whether it be a blank DVD or a previously burned DVD. It works for DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, and DVD+R DL media. It will tell you if its single layer, dual layer, or double layer. It list all the burning speeds that is supports. It also gives the total blank capacity of the disc. It gives you the "Manufacturer ID" (aka Media ID) of the disc so that you can see who actually makes the dye.

    Furthermore it will list all "video" and "audio" codec you have installed. Very handy if you are trying to determine if you have a specific codec installed or not.

    <hr>

    If you have Nero installed on your system, chances of having Nero InfoTool is almost certain. To start it, click "Start", then go to "All Programs" or "Programs", then click "Ahead" or "Nero", then click Nero Toolkit, then click "Nero InfoTool".

    As soon as you start it up, it will "analyze" your system and gather all the necessary information it needs. (Screen Shot Below)



    <hr>

    It will then present you with this screen with 7 tabs at the top (red) that cover specific areas. It also has 3 useful buttons located at the top, the "Save As" button, the "Print" button, and the "Refresh" button (blue). If you have more than 1 drive installed on your computer, you need to select the appropriate drive so that InfoTool can correctly tell you the limitations of that drive(green). (Screen Shot Below)



    <hr>
    Last edited by Chewy; 5 Mar 2009, 01:09 AM.
  • jmet
    Super Moderator
    • Nov 2002
    • 8697

    #2
    Using Nero InfoTool

    Drive Tab

    This is the tab you need to click to basically see what your drive is and isn't capable of doing. It tells you the max "Read" and "Write" speeds of the drive (gold). It tells you the current firmware you have installed for the drive (purple). You are mainly concerned with "Supported Features" section (red). It will list all features for both "Read" and "Write" and if your screen has a green check mark in the box, that means your drive supports that feature (blue), if the box is empty then it doesn't support it (green). (Screen Shot Below)

    Comment

    • jmet
      Super Moderator
      • Nov 2002
      • 8697

      #3
      Using Nero InfoTool

      Disc Tab

      This is the tab you would need to click on to find out specific information about the media currently in that drive. In my screen shot I have a disc that was previously burnt to. This tab is basically self explanatory but, it gives you the "Title" of the DVD, that date it was burnt, the file system (a standard DVD-Video should be UDF 1.02 or ISO/UDF 1.02 bridge), the disk capactity, and which program was used to burn it (red). (Screen Shot Below)

      Comment

      • jmet
        Super Moderator
        • Nov 2002
        • 8697

        #4
        Using Nero InfoTool

        Configuration Tab

        Here on this tab it shows you got your hard drives & optical drives (CD-ROM/DVD+RW drives) setup and on which IDE channel they are on. One thing to definitely look at is "DMA", and see if its turned on "On" (red). If its off, go <a href="http://forum.digital-digest.com/showthread.php?s=&threadid=44808">here</a> to learn how to turn it back on. (Screen Shot Below)

        Comment

        • jmet
          Super Moderator
          • Nov 2002
          • 8697

          #5
          Using Nero InfoTool

          Software Tab

          Here on this tab it tells you what Operating System (OS) you are using (red), what version of Direct X you are running (blue), and it list all "Nero" applications that you currently have installed (green). (Screen Shot Below)

          Comment

          • jmet
            Super Moderator
            • Nov 2002
            • 8697

            #6
            Using Nero InfoTool

            Drivers Tab

            On this tab it will list all the drivers you currently have installed (red), as well as all the "Audio" ( blue) & "Video" codec you have installed (green). (Screen Shot Below)

            Comment

            • jmet
              Super Moderator
              • Nov 2002
              • 8697

              #7
              Using Nero InfoTool

              Hardware Tab

              This tab just displays the basic information about your computer such as what CPU you have (red), what brand and model number motherboard you have (blue), how much memory (RAM) you have installed (green), and your what Sound card and Video card you have (purple). It also tell you vital BIOS information (gold). (Screen Shot Below)

              Comment

              • jmet
                Super Moderator
                • Nov 2002
                • 8697

                #8
                Using Nero InfoTool

                ASPI Tab

                ASPI stands for Advanced SCSI Programming Interface. It is a software layer that enables programs to communicate with SCSI and ATAPI devices. Nero uses its own ASPI so if one doesn't show up there under "System ASPI", just click the down arrow and change it to "Nero ASPI" (red). (Screen Shot Below)

                Comment

                • jmet
                  Super Moderator
                  • Nov 2002
                  • 8697

                  #9
                  Using Nero InfoTool

                  From time to time, you may need to report certain information to someone, like which IDE channel your DVD burner is on. Here is where you would use Nero's InfoTool. Click the "Save" button (red). (Screen Shot Below)



                  After clicking the "Save" button, this screen will come up. Here you can select which part of the report you wish to copy, most of the time it will be the "Configuration" section (red). Put a check mark in the appropriate box on which part you want to copy and then click the "Save" button (blue). You can use the "Preview" button to see what exactly will be copied at any time (green). (Screen Shot Below)



                  After saving, you should now have a .txt file all of your information you selected. Just open that up and highlight a certain part or highlight all of it, right click then "Copy" it, then come back to the forum and "Paste" it in a reply. (Screen Shot Below)

                  Comment

                  • codajohn
                    Digital Video Expert
                    Digital Video Expert
                    • Jul 2005
                    • 661

                    #10
                    Great tool.
                    However, the Hardware tab doesn't show the CPU, Bus Speed, Motherboard, System or BIOS. Memory, Sound and Video are listed. It isn't listed in the Save/Print window either.
                    Any ideas?
                    Thanks,
                    CJ
                    CJ
                    My DVD Collection
                    Register To Join Digital Video Forums


                    Dell Inspiron 9100 Laptop, Windows XP Home SP 2 (build 2600), 2.80GH Pent 4, ST94811A 40GB HD, 2GB RAM, NEC DVD+RW ND-6100A 104D, ATI MOBILITY RADEON 9700, External 250GB Maxtor HD, External LG-5163D A105

                    IBM ThinkCenter 8189, XP Pro, 3.2GH Pentium 4, 120 GB HD, 1GB Ram, BENQ DW1650 BCIC, Nvidia GeForce FX 5200, Generic floppy disk drive (3.5")

                    The Golden Rules of Burning

                    Comment

                    • jmet
                      Super Moderator
                      • Nov 2002
                      • 8697

                      #11
                      Not sure why yours isn't showing and <a href="http://forum.digital-digest.com/showthread.php?postid=340676#post340676">mine do</a>.

                      Comment

                      • codajohn
                        Digital Video Expert
                        Digital Video Expert
                        • Jul 2005
                        • 661

                        #12
                        How do I post my log? Is there any information areas that I would need to delete?
                        CJ
                        My DVD Collection
                        Register To Join Digital Video Forums


                        Dell Inspiron 9100 Laptop, Windows XP Home SP 2 (build 2600), 2.80GH Pent 4, ST94811A 40GB HD, 2GB RAM, NEC DVD+RW ND-6100A 104D, ATI MOBILITY RADEON 9700, External 250GB Maxtor HD, External LG-5163D A105

                        IBM ThinkCenter 8189, XP Pro, 3.2GH Pentium 4, 120 GB HD, 1GB Ram, BENQ DW1650 BCIC, Nvidia GeForce FX 5200, Generic floppy disk drive (3.5")

                        The Golden Rules of Burning

                        Comment

                        • jmet
                          Super Moderator
                          • Nov 2002
                          • 8697

                          #13
                          Your log? or do you mean screen shot? Information areas you need to delete???

                          Comment

                          • Chewy
                            Super Moderator
                            • Nov 2003
                            • 18971

                            #14
                            I have asked a few times for a report to be attached to a reply and so far
                            I am batting ZERO!
                            Attached Files

                            Comment

                            • codajohn
                              Digital Video Expert
                              Digital Video Expert
                              • Jul 2005
                              • 661

                              #15
                              Perhaps serial number? I've seen other posts where the person leaves out the serial number? No? I would more then happy to post a log. I've got it ready to upload. I found the attachment upload in the Go Advanced section.
                              Let me know.
                              CJ
                              CJ
                              My DVD Collection
                              Register To Join Digital Video Forums


                              Dell Inspiron 9100 Laptop, Windows XP Home SP 2 (build 2600), 2.80GH Pent 4, ST94811A 40GB HD, 2GB RAM, NEC DVD+RW ND-6100A 104D, ATI MOBILITY RADEON 9700, External 250GB Maxtor HD, External LG-5163D A105

                              IBM ThinkCenter 8189, XP Pro, 3.2GH Pentium 4, 120 GB HD, 1GB Ram, BENQ DW1650 BCIC, Nvidia GeForce FX 5200, Generic floppy disk drive (3.5")

                              The Golden Rules of Burning

                              Comment

                              Working...