LG Drive DL Model: GSA-H10N :Burning data issue

[InvidWarrior]

I got a replacement drive from the computer store where i bought my computer from, as the old drive was taken in, dvd disk got stuck inside and would not come out any thing i tried within the warranty. So I took it back and 3 weeks later they call me and they say that drive is dis-continued. So i get the new drive and i try to backup some .avi files. It fails and states, "Error reading data" So I'm down 1 disk. I did a simulation and find out it's the files, but i viewed the files and they sound and see excellent quality.

This is the last few line from the log:

#21 Text 0 File Cdrdrv.cpp, Line 1288
16:11:30.546 - HL-DT-ST DVDRAM GSA-H10N\H0 T2 : Queue again later

#22 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

#23 Text 0 File Reader.cpp, Line 385
Exception value: -1

#24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

#25 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 1079551

#26 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 8x (11,080 KB/s)

I know my system is more than good enough to run this burning, I have done it with the last drive. This new drive is new in the market the production date says April 2006. But maybe it needs to be flashed...? Please help, I'm running out of HD space!

[photo_angel2004]

hello,
Can you please post a full burn log. With only a few lines there is no way of knowing what is all going on with your burn. Also I see that you mentioned .avi / how are you trying to burn that? Did you convert that to a compatable dvd file or are you just trying to burn the .avi and the format it is to a dvd?

[InvidWarrior]

LG Drive DL Model: GSA-H10N :Burning data issue

OK here's the log error...I wasn't sure what was needed.
I burn them as data files and leave them as files, i prefer to watch them from the computer.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 0 TA 2 - 6.6.0.14
Adapter driver: <nvata> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 0 TA 2 - 6.6.0.14
Adapter driver: <nvata> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 nvata Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y160L0 nvata Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N nvata Port 0 ID 2 DMA: Off
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4520B nvata Port 0 ID 3 DMA: Off
DiskPeripheral : ST3300831AS nvata Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H10N F: CDRom0
HL-DT-ST RW/DVD GCC-4520B G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 616MB (631472kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.9.2006
ISO compilation
4:11:28 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:11:28 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

4:11:28 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running

4:11:28 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

4:11:28 PM #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

4:11:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2147663 (477:15.38, 4194MB)

4:11:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD DVD)

4:11:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

4:11:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:11:28 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2147664 (2147664) = #2147664/477:15.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2147664 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------

4:11:28 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4398415872, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2147664 | lead-out | 1 | 0x41 | 0x00

4:11:28 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:11:28 PM #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

4:11:28 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:11:28 PM #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11,080 KB/s)

4:11:28 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:11:28 PM #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

4:11:28 PM #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

4:11:28 PM #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

4:11:29 PM #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 23C54F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:11:30 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
16:11:30.546 - HL-DT-ST DVDRAM GSA-H10N\H0 T2 : Queue again later

4:15:09 PM #22 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

4:15:09 PM #23 Text 0 File Reader.cpp, Line 385
Exception value: -1

4:15:13 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:15:13 PM #25 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 1079551

4:15:29 PM #26 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\nvata.sys': Ver=5.10.2600.0534 built by: WinDDK, size=92800 bytes, created 5/17/2005 5:45:08 AM (Adapter driver for rec)

[Chewy]

'Drivers\nvata.sys'

bad business, roll back to ms default for ide optical drives

serial is fine but not for pata drives

ritekf1's are very problematic


WinAspi: File 'Wnaspi32.dll': Ver=4.60

http://forum.digital-digest.com/showpost.php?p=436413&postcount=11

I hate aspi from adaptec and windows xp