Linksys WRT54G ver 7 router

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • atifsh
    Lord of Digital Video
    Lord of Digital Video
    • May 2003
    • 1534

    Linksys WRT54G ver 7 router

    if ur cursing ur luck to get hold of ver 7, well look at the new firmware and dont forget to look at the change log / fixes... ull be amazed, wondering why they on the first place put somthing like ver 7 out.
    Seems like as soon you buy somehing, v. 2 comes out 1.5 times as fast!..!
  • atifsh
    Lord of Digital Video
    Lord of Digital Video
    • May 2003
    • 1534

    #2
    ok for ppl who know linksys makes good products look at this, wondering how that thing was actually working before.

    Firmware 7.00.4
    - Resolves interoperability issue with WAP54G and WRE54G in WPA-PSK mode.
    - Resolves intermittent reboot issue when BitTorrent is running when UPnP is enabled on the router.
    - Resolves wireless data rate performance issues.
    - Resolves issue with router assigns declined IP address to LAN host.
    - Resolves issue with QoS module algorithm.
    - Resolves reboot issue if fragmentation threshold is set to value less than 1500.
    - Resolves issue with wireless MAC filtering configuration GUI.
    - Resolves issue with saving RADIUS passphrase.
    - Resolves display problems in routing policy configuration GUI.
    - Resolves issue of RIP request packets not being sent out after switching to router mode.
    - Resolves issue of logging the same event more than once when log function is enabled.
    - Resolves issue of unexpected clearing of log when user stops and closes traceroute.
    - Resolves issue of not being able to accessing some configuration settings after changing password.
    - Resolves issues with incorrect beacon interval acceptable range and beacon packets not being sent out on some particular settings.
    - Corrects "Port Range Forward" policies validation.
    - Fixes problem of not storing DNS address(es) correctly if static DNS address(es) is/are used.
    - For security purpose, "Clone Your PC's MAC" functionality is no longer available if user accesses router remotely.
    - Resolves issue of displaying incorrect HTTPS certificate message.
    - Fixes problem in QoS configuration validation.
    - Fixes incorrect supported rates in beacon packets when wireless mode is set to 'mixed'.
    - Resolves reboot issue with setting beacon interval to value greater than 5000.
    - Corrects ARP exchange behavior on WAN interface (DHCP mode) after obtaining IP address via DHCP.
    - Corrects PPTP connection behavior when PPTP mode is set to "on-demand" mode.
    - Resolved issue with not being able to set UPnP policy with port number less than 1024.
    - Fixes problem of DMZ feature not functioning properly.
    - Resolves issue with not showing the most up-to-date connection status on WAN interface in MS Windows XP via UPnP.
    - Resolves issue with LAN host intermittently not being able to obtain IP address from router via DHCP when DHCP server is enabled.
    - Resolves issue with IP address assignment via DHCP on some particular devices.
    - Corrects DHCP protocol stack behavior when switching from PPPoE mode to DHCP mode.
    - Corrects "Access Restriction" behavior when system time is not available.
    - Resolves issue of not trying alternative DNS if the preferred DNS does not respond.
    Seems like as soon you buy somehing, v. 2 comes out 1.5 times as fast!..!

    Comment

    Working...