Once I have completed writing the ISO to a disc how do I know if the disc was set to a dvd-rom properly?. I am using Verbatim data life plus DVD+R's with a Plextor 716A writer. Where can I tell if the copied disc is now truly a dvd-rom?
Booktype set properly?
Collapse
X
-
Tags: None
-
stick the burned disk back in the drive and look at the right window
imgburn log will also tell
HL-DT-ST DVDRAM GSA-4163B A106 (ATA)
Current Profile: DVD+R
Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 2,098,912
Size: 4,298,571,776 bytes
Time: 466:27:37 (MM:SS:FF)
Supported Write Speeds: 4x, 8x, 12x
TOC Information:
Session 1...
-> Track 01 (Mode 1, LBA: 0 - 2098911)
-> LeadOut (LBA: 2098912)
Physical Format Information (Last Recorded):
Disc ID: YUDEN000-T02-00
Book Type: DVD-ROM -
If you open ImgBurn, put disk in, right hand side of screen, about 1/2 down, look forPhysical Format Information (Last Recorded):
Physical Format Information (Last Recorded):
Disc ID: RICOHJPN-R01-02
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,449,711
Last Physical Sector in Layer 0: 0Important: Remember, if something is worth doing, its worth doing wrong until you learn to do it Right!
sigpic IT'S ALL GOODComment
-
Cool, Thanks Chewy!
Just to make sure, how does my log look?
I 15:27:14 ImgBurn Version 2.3.0.0 started!
I 15:27:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 15:27:14 Total Physical Memory: 2,096,128 KB - Available: 1,291,540 KB
I 15:27:14 Initialising SPTI...
I 15:27:14 Searching for SCSI / ATAPI devices...
I 15:27:14 Found 1 DVD-ROM and 1 DVD±RW!
I 15:27:26 Operation Started!
I 15:27:26 Source File: M:\Output\STAND BY ME.ISO
I 15:27:26 Source File Sectors: 2,133,019 (MODE1/2048)
I 15:27:26 Source File Size: 4,368,422,912 bytes
I 15:27:26 Source File Volume Identifier: STAND BY ME
I 15:27:26 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
I 15:27:26 Source File Implementation Identifier: mkisofs
I 15:27:26 Source File File System(s): ISO9660, UDF (1.02)
I 15:27:26 Destination Device: [2:0:0] PLEXTOR DVDR PX-716A 1.10 (E (ATA)
I 15:27:26 Destination Media Type: DVD+R (Disc ID: MCC-003-00) (Speeds: 4x, 6x, 8x, 12x)
I 15:27:26 Destination Media Sectors: 2,295,104
I 15:27:26 Write Mode: DVD
I 15:27:26 Write Type: DAO
I 15:27:26 Write Speed: 4x
I 15:27:26 Link Size: Auto
I 15:27:26 Test Mode: No
I 15:27:26 BURN-Proof: Enabled
I 15:27:26 Filling Buffer... (40 MB)
I 15:27:27 Writing LeadIn...
I 15:27:49 Writing Image... (LBA: 0 - 2133018)
I 15:40:55 Synchronising Cache...
I 15:40:59 Closing Track...
I 15:41:00 Finalising Disc...
I 15:41:15 Image MD5: dc17d275da02a0043b52aaeb4da2db9d
I 15:41:17 File Successfully Deleted: M:\Output\STAND BY ME.ISO
I 15:41:17 Operation Successfully Completed! - Duration: 00:13:49
I 15:41:17 Average Write Rate: 5,427 KB/s (3.9x) - Maximum Write Rate: 5,618 KB/s (4.1x)
I 15:41:17 Close Request Acknowledged
I 15:41:17 Closing Down...Comment
-
Thanks.Comment
-
I have never had a bad burn with the 8x verbs. I had been using -r and just recently switched over to +R of the same kind. I always have burned at 4x using the latest imgburn. I never used verify before, but still never had a bad burn. I am checking it now because I figured it wouldn't hurt.
I 00:59:01 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MCC-003-00) (Speeds: 4x, 6x, 8x, 12x)
(the above part would show me, in the log, that the booktype was set properly to -rom correct?)Last edited by youthinksoo; 30 Mar 2007, 10:15 AM.Comment
Comment