Error burning with IMG on DL

**locoeng** · 14 Apr 2007, 06:01 AM

A log would prove useful in this case.

What brand discs are you using?
Firmware current for burner?
What did the error say in its entirety?

**soup** · 14 Apr 2007, 07:27 AM

the file was too big to shrink efffectively (55%)

As long as everything is in order & you are using good media, you should have no problem with 55%. I have done lots of episodic dvd's at that compression & had no problems. I would suggest Maximum Smooth for anything less than 65% in Quality Settings. As for your DL, your problem probably stems from the fact that you opened DvdFab Decrypter's output in Dvd Shrink. Dvd Shrink should never be involved in DL. If this is an old classic, I would suggest using Dvd Decrypter (ISO Read) then use ImgBurn to burn that output.

**buytick** · 14 Apr 2007, 08:07 AM

This my PGCedit log:

mkisofs log for DVD "TALE_OF_TWO_CITIES"
From: "C:\Documents and Settings\Owner\Desktop\tale\MainMovie\TALE OF TWO CITIES"
DVD-TEXT General Name: ""
Provider ID: ""
Number of VTS: 1
Output file: "C:\TALE_OF_TWO_CITIES.ISO"
Volume label: "TALE_OF_TWO_CITIES"
Running under windows (OS type: Windows NT)

mkisofs 2.01 X (i686-pc-cygwin)
Layer break is at absolute sector 1952512. (Offset in L0 is 800215.)
Layer break cell:
1152297: VTST 1 , 1 TTN 1 (2:05:56) Title 1 Cell 13 (00:02:23.00), V/CID: 2/1 high mux rate

The pad was 800231 for file VIDEO_TS.IFO
Total translation table size: 0
Total rockridge attributes bytes: 0
Total directory bytes: 4248
Path table size(bytes): 42
Max brk space used 5000
3905014 extents written (7626 MB)

ISO created OK.

Here is my IMG Burn log.

ImgBurn Version 2.3.0.0 - Log
; Friday, 13 April 2007, 14:50:17
; \\****************************************//
;
;
I 14:30:06 ImgBurn Version 2.3.0.0 started!
I 14:30:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 14:30:06 Total Physical Memory: 522,736 KB - Available: 155,084 KB
I 14:30:06 Initialising SPTI...
I 14:30:06 Searching for SCSI / ATAPI devices...
I 14:30:06 Found 1 DVD+RW and 1 DVDÂ±RW!
I 14:30:06 Operation Started!
I 14:30:06 Source File: C:\TALE_OF_TWO_CITIES.ISO
I 14:30:06 Source File Sectors: 3,932,503 (MODE1/2048)
I 14:30:06 Source File Size: 8,053,766,144 bytes
I 14:30:06 Source File Volume Identifier: TALE_OF_TWO_CITIES
I 14:30:06 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
I 14:30:06 Source File Implementation Identifier: mkisofs
I 14:30:06 Source File File System(s): ISO9660, UDF (1.02)
I 14:30:06 Destination Device: [1:0:0] BENQ DVD LS DW1655 BCDB (D

(ATA)
I 14:30:06 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 14:30:06 Destination Media Sectors: 4,173,824
I 14:30:06 Write Mode: DVD
I 14:30:06 Write Type: DAO
I 14:30:06 Write Speed: 2.4x
I 14:30:06 Link Size: Auto
I 14:30:06 Test Mode: No
I 14:30:06 BURN-Proof: Enabled
I 14:30:06 User Specified L0 Data Zone Capacity: 2,011,632
I 14:30:07 Filling Buffer... (20 MB)
I 14:30:10 Writing LeadIn...
I 14:30:41 Writing Image... (LBA: 0 - 3932502)
I 14:30:41 Writing Layer 0... (LBA: 0 - 2011631)
W 14:47:23 Failed to Write Sectors 1571104 - 1571135 - Write Error
W 14:47:23 Retrying (1 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (2 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (3 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (4 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (5 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (6 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (7 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (8 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (9 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (10 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (11 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (12 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (13 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (14 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (15 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (16 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (17 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (18 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (19 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (20 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
E 14:47:50 Failed to Write Sectors 1571104 - 1571135 - Write Error
I 14:47:50 Synchronising Cache...
I 14:47:51 Closing Track...
I 14:47:53 Finalising Disc...
W 14:50:07 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error
E 14:50:15 Finalise Disc Failed! - Reason: Write Error
I 14:50:15 Finalising Disc (Last Attempt!)...
E 14:50:15 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session
E 14:50:15 Failed to Write Image!
E 14:50:15 Operation Failed! - Duration: 00:20:08
I 14:50:15 Average Write Rate: 3,053 KB/s (2.2x) - Maximum Write Rate: 3,439 KB/s (2.5x)
I 14:50:17 Close Request Acknowledged
I 14:50:17 Closing Down...
I 14:50:17 Shutting down SPTI...
I 14:50:17 ImgBurn closed!

**buytick** · 14 Apr 2007, 08:11 AM

Thank you Soup.
I don't like to reduce that much b/c I watch the DVD's on an HD TV. So you say use DVD Decrypter then IMGBurn, but how will the layer break be done without PGC edit?

**locoeng** · 14 Apr 2007, 08:44 AM

BENQ DVD LS DW1655 BCDB

DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)

There is a firmware update available, but I doubt if it will cure your woes....I've used that same combo (drive, firmware and media) before with no problems.

The Dangerous Brothers Present....

http://tdb.rpc1.org/#DW1655

Actually I think it was the BDGB that I was using...anywho, you want BCIB.

Does the disc play?

**soup** · 14 Apr 2007, 09:47 AM

I watch my dvd's on a 32" Samsung LCD. Try one if you don't like it, what has it cost? A little bit of time & 30 to 50 cents. Remember at that compression it will take a while to analyze & encode.

I am sorry, I forgot about your question on ISO read with Dvd Decrypter. Now this is only for older movies. When you do an ISO read with Dvd Decrypter, it creates two files, ISO & MDS. In ImgBurn when you browse to the file you want to burn, you choose the MDS file which contains the layer break info, not forgetting to booktype for Dvd+R DL Media & burn @ 2.4.

**buytick** · 14 Apr 2007, 11:37 PM

locoeng
thanks. i updated my firmware. i'm still not sure why that happened. is there another process for burining my dual layers? fab-shrink-pgcedit-imgburn

**locoeng** · 15 Apr 2007, 01:38 AM

Why are you using PgcEdit...removing unwanted stuff? In build mode Imgburn will take your VIDEO_TS folder and create a double layer ISO and set it's own layer break for you.

**buytick** · 15 Apr 2007, 03:55 AM

How does IMG know to make a DL dvd? SO all I have to do is Fab, Shrink (if I want to remove stuff) and burn with IMG?

**locoeng** · 15 Apr 2007, 06:17 AM

Here are a few guides for you...they are really simple.

Burning on the fly from VIDEO_TS folderhttp://forum.imgburn.com/index.php?showtopic=1780

Creating a DL ISO with Imgburnhttp://forum.imgburn.com/index.php?showtopic=1777

**blutach** · 15 Apr 2007, 09:55 AM

@locoeng - the ISO is fine. The burn is bad.

Hope the updated firmware helps.

Regards

**locoeng** · 15 Apr 2007, 10:07 AM

I was just trying to eliminate a step if not needed.

**buytick** · 15 Apr 2007, 10:55 AM

I already made 3 DL coasters trying to burn. I hope the firmware will do the trick. I thought the ISO was OK and couldn't understand why IMG wouldn't burn it. IMG used to burn all my DL's without a problem. But it also happened with another old classic recently, so maybe it was the firmware.
Thanks for all your help.

**blutach** · 15 Apr 2007, 11:00 AM

It started to burn it and didn't like what it saw about 2/3 of the way thru layer 0. Try that new firmware, failing which a lens cleaner might do the trick.

Make sure DMA is on.

Regards

Error burning with IMG on DL

Error burning with IMG on DL

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment