I don't understand this I/O Error!

**Dialysis1** · 11 May 2007, 12:22 PM

Try with better media.

**NightTran** · 11 May 2007, 04:52 PM

I 19:12:26 Write Speed: MAX

**Chewy** · 11 May 2007, 07:38 PM

tsstcorp TS-H653L @18x using anything? - Digital Video Forums

http://forum.digital-digest.com/showthread.php?t=81155

Talk about blank DVD media, burning and hardware related problems

not a good combination, new sata burner, vista, funky drivers and then use crap media, guess we'll never get to the bottom of this

**Teneniel** · 12 May 2007, 02:18 AM

NightTran, I didn't realize I had it set for that, I will try slowing it down thanks.

Dialysis1 - People keep telling me Memorex is just as good as Verbatim. I guess they were wrong.

Chewy - This is my only PC and it can't run XP. I don't like Vista any better than anyone else but I'm stuck with it. The drivers are what works. If anyone knows of better drivers I'd be happy to use them. The bashing just isn't necessary.

**Teneniel** · 12 May 2007, 02:28 AM

So, can anyone translate the error?

**Cambion7** · 12 May 2007, 03:39 AM

Originally Posted by Teneniel

So, can anyone translate the error?

I found a link that discusses this issue here.

Basically they're saying a power calibration error is caused by the inability of a DVD-RW drive to use a DVD-R or DVD-RW disk. I'd side with poor media. Those Daxon-AZ3 are rated as 2nd-class media which are better than CMC Mags but not as good as TY and Verbs.

Lower your speed to 4X and see if that makes a difference. If you know someone with blank Verbs or TY's get one and try that media. Have you had successful burns with your Vista Home setup in the past?

Cam
:cheers:

**Dialysis1** · 12 May 2007, 03:39 AM

Usually a search on the errors will give you the answer such as Power Calibration Area Error. Some Nero's errors can be found here.

**Chewy** · 12 May 2007, 04:08 AM

the one thing that you can control is the media used, hopefully any driver problem will be addressed by the manufacturer

**Teneniel** · 12 May 2007, 10:41 AM

Cambion - yeah, I had a spindle of 100 and I'm somewhere in the last 20 discs. I've never had an error before.

Everyone else-
I cleaned the drive, it wasn't due for a couple discs yet, but I did it anyway. Then I burned at 4x and it succeeded beautifully. Then I tried 8x saved 8 min. and had a successful burn. Then just for kicks I went back to MAX speed, burned fine and saved another 5 min. I've set it back to 4x since the media could be better and I'll stick with it until I get through these discs. Then I'm going to search for better media. I've read up on a few additional sites now and poor media seems to be the only explanation for this error. I do think in my case though I must have just had a dirty lens because I've never had trouble with these discs before and the rest of them are working fine with no errors. But I promise after I finish this spindle, I won't buy them again.

**Chewy** · 12 May 2007, 11:24 AM

sounds like your new drive picked up some dust, lint or dirt off the blanks?

4x burn should take 15 min
8x burn 8-9 min
16x burn 6 min

**Chewy** · 12 May 2007, 05:55 PM

TS-H653L 0414 (E (RAID)

this should be scuzzi for sata drives or ata for ide emulation

the raid would seem to indicate a misconfigured bios or driver install

since I am not using vista/sata burners and didn't write imgburn or load the computers showing these errors that's about as good a guess as I can make

**rock_king_my** · 21 Jul 2007, 02:19 AM

My I/O Error

Hi.

Can anyone traslate my error?

; //****************************************\\
; ImgBurn Version 2.3.2.0 - Log
; Saturday, 21 July 2007, 00:43:08
; \\****************************************//
;
;
I 00:05:35 ImgBurn Version 2.3.2.0 started!
I 00:05:35 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 00:05:35 Total Physical Memory: 1,046,960 KB - Available: 382,300 KB
I 00:05:36 Initialising SPTI...
I 00:05:36 Searching for SCSI / ATAPI devices...
I 00:05:36 Found 2 DVDÂ±RWs!
I 00:15:35 Operation Started!
I 00:15:35 Building Image Tree...
I 00:15:35 Checking Directory Depth...
I 00:15:35 Calculating Totals...
I 00:15:35 Preparing Image...
I 00:16:58 Using Layer Break LBA: 2078193 -> 2078208 (VTS_01, PGC: 1, Chapter: 17, Cell: 18, Vob/Cell ID: 1/18, Time: 01:03:34, SPLIP: No)
I 00:16:58 Checking Path Length...
I 00:16:58 Image Size: 8,245,084,160 bytes
I 00:16:58 Image Sectors: 4,025,920
I 00:16:58 Operation Successfully Completed! - Duration: 00:01:23
I 00:21:37 Operation Started!
I 00:21:37 Building Image Tree...
I 00:21:37 Checking Directory Depth...
I 00:21:37 Calculating Totals...
I 00:21:37 Preparing Image...
I 00:21:46 Using Layer Break LBA: 2078193 -> 2078208 (VTS_01, PGC: 1, Chapter: 17, Cell: 18, Vob/Cell ID: 1/18, Time: 01:03:34, SPLIP: No)
I 00:21:46 Checking Path Length...
I 00:21:46 Image Size: 8,245,084,160 bytes
I 00:21:46 Image Sectors: 4,025,920
I 00:21:53 Operation Successfully Completed! - Duration: 00:00:15
I 00:21:53 Operation Started!
I 00:21:53 Image Contents: 53 Files, 2 Folders
I 00:21:53 Image Sectors: 4,025,920
I 00:21:53 Image Size: 8,245,084,160 bytes
I 00:21:53 Image Layer Break Position: 2,078,208
I 00:21:53 Image Single Layer Profile: DVD-R/RW (Media Capacity: 2,298,496)
I 00:21:53 Image Double Layer Profile: DVD+R DL (Min L0: 0, Max L0: 2,086,912, Media Capacity: 4,173,824)
I 00:21:53 Image Volume Identifier: Hot_Fuzz_Disc1
I 00:21:53 Image Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!
I 00:21:53 Image Implementation Identifier: ImgBurn
I 00:21:53 Image File System(s): ISO9660, UDF (1.02)
I 00:21:53 Destination File: C:\Documents and Settings\user\Desktop\IMGBURN\HotFuzz_Disc1.iso
I 00:21:53 Destination Free Space: 10,549,161,984 bytes (10,301,916 KB) (10,060 MB) (9 GB)
I 00:21:53 Destination File System: NTFS
I 00:21:53 File Splitting: Auto
I 00:21:55 Writing Image...
I 00:33:43 Image MD5: 7e5ba9934341dc73924676b91caa71d1
I 00:33:43 Operation Successfully Completed! - Duration: 00:11:49
I 00:33:43 Average Write Rate: 11,356 KB/s (8.2x) - Maximum Write Rate: 29,458 KB/s (21.3x)
I 00:42:55 Close Request Acknowledged
I 00:42:55 Closing Down...
I 00:42:59 Shutting down SPTI...
I 00:43:00 ImgBurn closed!

I don't understand this I/O Error!

I don't understand this I/O Error!

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment