please help if u can ... i use encrypter 3.2.3.0. then shrink 3.1.7.6. with nero 6 updated with 6.3 and with some dvds i get the same error as below
i have updated the firmware at pioneer site and have read through forum for clues and fixes ... did the reinstall of nero and shrink .. after which 2 burns of different dvds were success and the third dvd a fail with this error below
i have 512 ram and wasnt running any other progs or on the net when this last error occured .. have burnt 20 good dvds since i started a few days ago and probly 5 or 6 bad ones with this error ... am using princo 4x blanks
i did manage to burn success after a fail once but have had repeat fails on same burn as well ... it has happened with both re author and full ... sob
hope this all makes sense (pun sense key)
** deleted all the stuff unecessary from the error text **
10:47:36 PM #24 Text 0 File Cdrdrv.cpp, Line 1285
22:47:36.390 - PIONEER DVD-RW DVR-107D\H2 T0 : Queue again later
10:50:48 PM #25 SCSI -1064 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x013F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x07 0x8A 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02
10:50:48 PM #26 CDR -1064 File Writer.cpp, Line 301
Invalid block address
10:50:48 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:50:48 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
10:50:48 PM #29 Text 0 File DVDR.cpp, Line 1921
EndDAO: Last written address was 494143
10:50:48 PM #30 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 2:03:36 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
i have updated the firmware at pioneer site and have read through forum for clues and fixes ... did the reinstall of nero and shrink .. after which 2 burns of different dvds were success and the third dvd a fail with this error below
i have 512 ram and wasnt running any other progs or on the net when this last error occured .. have burnt 20 good dvds since i started a few days ago and probly 5 or 6 bad ones with this error ... am using princo 4x blanks
i did manage to burn success after a fail once but have had repeat fails on same burn as well ... it has happened with both re author and full ... sob
hope this all makes sense (pun sense key)
** deleted all the stuff unecessary from the error text **
10:47:36 PM #24 Text 0 File Cdrdrv.cpp, Line 1285
22:47:36.390 - PIONEER DVD-RW DVR-107D\H2 T0 : Queue again later
10:50:48 PM #25 SCSI -1064 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x013F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x07 0x8A 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02
10:50:48 PM #26 CDR -1064 File Writer.cpp, Line 301
Invalid block address
10:50:48 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:50:48 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
10:50:48 PM #29 Text 0 File DVDR.cpp, Line 1921
EndDAO: Last written address was 494143
10:50:48 PM #30 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 2:03:36 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Comment