Dvd Shrinking Burning Problem

[HUDMAN]

I really need some help with burning some DVDs.I get to the part were I start burning the DVD R and it gets all the way to the end of the burn and I get a Burning process failed at 2 X (2700KB/s)
I,m using DVD Shrink with Nero 6.1 and I dont no were to go from here.Here is what comes up after I get the error

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.25
Using interface version: 6.3.1.4
Installed in: C:\Program Files\ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-812S> Version: US05 - HA 1 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-812S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8161 D: CDRom0
LITE-ON DVDRW SOHW-812S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 78MB (80160kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

26.9.2004
NeroAPI
10:22:01 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

10:22:02 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

10:22:02 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

10:22:04 PM #4 Text 0 File Reader.cpp, Line 126
Reader running

10:22:04 PM #5 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-812S running

10:22:04 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

10:22:25 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

10:22:25 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

10:22:25 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media

10:22:25 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

10:22:25 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

10:22:25 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON DVDRW SOHW-812S, Media type: DVD-R
Disc Manufacturer: VDSPMS - AB 01
Disc Application Code: 64, Disc Physical Code: 193

10:22:25 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:22:25 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [LITE-ON DVDRW SOHW-812S ]
--------------------------------------------------------------

10:22:25 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-812S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

10:22:26 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

10:22:26 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

10:22:26 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

10:22:26 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

10:22:26 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:22:26 PM #21 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode

10:22:26 PM #22 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , SMART-BURN : ON

10:22:26 PM #23 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes

10:22:26 PM #24 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:22:44 PM #25 Text 0 File Cdrdrv.cpp, Line 1297
22:22:44.578 - LITE-ON DVDRW SOHW-812S\H1 T1 : Queue again later

10:23:24 PM #26 Text 0 File Cdrdrv.cpp, Line 1297
22:23:24.575 - LITE-ON DVDRW SOHW-812S\H1 T1 : Queue again later

10:51:57 PM #27 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-812S > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

10:51:58 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:51:58 PM #29 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 2286111

10:52:17 PM #30 SCSI -1176 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02

10:52:17 PM #31 CDR -1176 File ThreadedTransferInterface.cpp, Line 1708
Session fixation error

10:52:17 PM #32 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once

10:52:17 PM #33 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was -1

10:52:17 PM #34 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2x (2,770 KB/s)

10:52:17 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

10:52:17 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 8:24:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

If you can help that would be great:

[cynthia]

Could try to update your firmware;

http://forum.rpc1.org/dl_firmware.php?download_id=1792

http://www.liteonamericas.com/us/download.htm

[Floppy]

TO HUDMAN

Erase your serial number off of the post please

Try and have more free space on your drive then 78 MB

other burn programs can interfere with nero.

Download:

ftp://ftp.nero.com/gear.zip

Good things

[cynthia]

Originally posted by Fil
Try and have more free space on your drive then 78 MB

"Free physical memory: 78MB"

It's RAM - not HD space.

[Floppy]

Hello oops sorry didnt put on my contacts...

Go here for more information on SCSI errors too : #25

http://www.nero.com/en/632181809668074.html#25

[Floppy]

Hello again :0

Is the media your using the same as b4?

To learn more about reading a Nero log file go here:

http://www.nero.com/en/631939497433315.html