Burn process failed at 8x(11,080 KB/s)

**blutach** · 24 Jan 2005, 08:47 PM

You've only got 1 hard drive and 1 DVD drive. Each are configured as masters on the primary (DVD) and secondary channel (hard drive). There is no slave (device 1) on either channel. Nothing to worry about in respect of DMA.

Regards

**the_selecter** · 24 Jan 2005, 08:56 PM

Thanks for the info. I was wondering why I couldn't change it. I think it was greyed out.

I do have a DVD drive on my laptop (read only though) and the DVD writer is connected via my USB 2.0 port. Will this make any difference?

**the_selecter** · 25 Jan 2005, 12:33 AM

I take it you've looked at my attached Nerorecod.txt file rather than the log print out at the top of the start of this thread?

Does anyone think it may be firmware? I've downloaded the current version of Nero and DVD Decrypter so I'm assuming I can rule these 2 out of the equation?

Help!!!

**the_selecter** · 26 Jan 2005, 12:03 AM

This is the error file

********** Nero Recode 2 **********

Version: 2.2.6.4

Project type: Copy entire DVD
Target size: Custom (4352000)

00:46:08 File LangStreamPatcher.cpp, Line 56
Command table patching started...

00:46:08 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTSM_PGCI_UT - LU 1 - PGC 2 patched!

00:46:08 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!

Burn settings:
Target: LITE-ON DVDRW SOHW-1633S
Number of copies: 1
Write speed: 3324 KB/s
Temp folder: C:\Documents and Settings\UserName\My Documents\Nero Recode
(18412314624 bytes free)
Direct burning: true
Target media: DVD+R9 Double Layer
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false

00:46:31 File burn_dvdfiles.cpp, Line 231
Compile DVD: init

VMG Menus Vobs [41 vobus] 17.15MB -> 17.15MB [R 1.00]
Video: 16.62MB, extra: 0.53MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 0.45MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]

VTS_01 Menus Vobs [1073 vobus] 256.99MB -> 256.99MB [R 1.00]
Video: 242.26MB, extra: 14.73MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 12.19MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.45MB [enabled]

VTS_01 Title Vobs [17683 vobus] 6246.91MB -> 6246.91MB [R 1.00]
Video: 5727.41MB, extra: 519.50MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 475.10MB [enabled]
Subpicture: 2 streams
0. 0. English 0.54MB [enabled]
1. 1. English 9.32MB [enabled]

VTS_02 Menus Vobs [3 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]

VTS_02 Title Vobs [229 vobus] 62.20MB -> 62.20MB [R 1.00]
Video: 59.26MB, extra: 2.93MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 2.49MB [enabled]
Subpicture: 0 streams

00:46:31 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1

00:46:32 File NeroRecorderBase.cpp, Line 452
Writing to disc: DVD+R9 Double Layer

00:46:32 File NeroRecorderBase.cpp, Line 466
Free capacity on disc: 4152409 sectors (4173824)

00:46:33 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 4152409 sectors (3370766 required)

00:46:33 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 8110.17MB (6583.53MB obtained)

00:46:33 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started

00:46:33 File vob_record.cpp, Line 643
DirectBurn offset: VIDEO_TS.VOB 16

00:46:34 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs

VMG Menus Vobs:
Original 17.15MB -> Expected 17.15MB -> Output 17.15MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 41
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.51MB
Source video size = 16.64MB
Pictures Modified [I 0] [P 0] [B 0]

00:46:37 File NeroRecorder.cpp, Line 444
Burn failed (3)

----- Begin NeroAPI error log -----

1A23-0009-0030-2383-0571-2941
1A25-4706-7030-1366-1263-4647

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:21:30
Nero API version: 6.6.0.6
Using interface version: 6.6.0.2
Installed in: C:\Program Files\Ahead\Nero\
Application: Ahead\Nero Recode
Recorder : <LITE-ON DVDRW SOHW-1633S>Version: BS0C - HA 2 TA 0 -
6.6.0.6
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4240N atapi Port 0 ID 0
DMA: On
DiskPeripheral : HITACHI_DK23EB-40 atapi Port 1 ID 0
DMA: On

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4240 D: CDRom0
LITE-ON DVDRW SOHW-1633S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 274MB (280620kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.1.2005
NeroAPI
00:46:32 #1 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: -1 ( 0:00.-1, 0MB)

00:46:32 #2 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO

00:46:32 #3 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0

00:46:32 #4 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

00:46:32 #5 Text 0 File BurnAtOnceRecorder.cpp, Line 4498
Frist possible LBA for Layerbreak: 1694096

00:46:32 #6 Text 0 File BurnAtOnceRecorder.cpp, Line 4499
Last possible LBA for Layerbreak: 2086911

00:46:32 #7 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type:
recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D7FF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63:
64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 00 00 28 64 00 - 28 64 19 1B 0B 0B 0E 0F %7..(d.(d......
01 00 00 00 00 19 1B 0B - 0B 0E 0F 01 00 00 00 00 ................

00:46:32 #8 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes

00:46:33 #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1001
Estimated filesystem size: 544

00:46:33 #10 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
00:46:33 #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1682
Buffering files started

00:46:33 #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1403
Buffering VIDEO_TS.VOB

00:46:35 #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2558
Finished buffering file VIDEO_TS.VOB of size 17981440 bytes (8780 sectors)

00:46:35 #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2625
Finished writing file VIDEO_TS.VOB of size 17981440 bytes (8780 sectors)
00:46:35 #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
Buffering files finished successfully

00:46:35 #16 CDR -1205 File BurnAtOnceRecorder.cpp, Line 1837
Burning Layer 1

00:46:35 #17 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x24 0x90
0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

00:46:35 #18 Text 0 File BurnAtOnceRecorder.cpp, Line 679
Error reserving fragment (0)

00:46:36 #19 Text 0 File BurnAtOnceRecorder.cpp, Line 3625
Disc info:
Partitions: 0

00:46:36 #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1855
Error reserving start segment

00:46:36 #21 Text 0 File BurnAtOnceRecorder.cpp, Line 3625
Disc info:
Partitions: 0

00:46:36 #22 Phase 179 File APIProgress.cpp, Line 276
Writing file to disc failed

00:46:37 #23 Text 0 File BurnAtOnceRecorder.cpp, Line 3625
Disc info:
Partitions: 0

00:46:39 #24 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218),
size=101888 bytes, created 17/08/2001 13:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created
06/05/2004 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created
03/01/2005 11:33:44 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created
03/01/2005 11:33:24 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1,size=8704 bytes, created
03/01/2005 11:33:46 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)
----- End NeroAPI error log -----

00:46:40 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit

**gsankar11** · 19 Jun 2011, 12:00 AM

Hi friends.. i'm using acer travelmate 5700 laps.. when i started to burn files using nero7 i got a error message that "Burn process failed at 8xspeed".. so i'm upgraded my nero to Nero 10 version but now itself also it says the same error message ly... here is the log file

8X0E-2080-7A6E-55UM-9L8H-WM6U-****-****

Windows 7 6.1
IA32
Nero Version: 10.6.3.100
Internal Version: 10,6,3,100

Recorder: <HL-DT-ST DVDRAM GSA-T40N>Version: JP01 - HA 1 TA 0 - 10.6.3.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <IPIXM M78XYVOXY7S >Version: 1.04 - HA 1 TA 1 - 10.6.3.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : IPIXM M78XYVOXY7S 1.04 amkfj20t Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-T40N G: CdRom0
IPIXM M78XYVOXY7S I: CdRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1014MB (1038776kB)
Free physical memory: 396MB (406236kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.6.2011
ISO compilation
15:37:53 #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

15:37:53 #2 Text 0 File Isodoc.cpp, Line 7060
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:37:53 #3 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)

15:37:54 #4 Text 0 File Burncd.cpp, Line 3591
Turn on Disc-At-Once, using DVD media

15:37:54 #5 Text 0 File DlgWaitCD.cpp, Line 314
[G: DVDRAM GSA-T40N ] Last possible write address on media: 2295103
Last address to be written: 2235567

15:37:54 #6 Text 0 File DlgWaitCD.cpp, Line 326
[G: DVDRAM GSA-T40N ] Write in overburning mode: NO (enabled: CD)

15:37:54 #7 Text 0 File DlgWaitCD.cpp, Line 2917
Recorder: HL-DT-ST DVDRAM GSA-T40N, Media type: DVD+R
Disc Manufacturer ID: <MBIPG101>, Media Type ID: <R05>, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7

15:37:54 #8 Text 0 File DlgWaitCD.cpp, Line 499
[G: DVDRAM GSA-T40N ] >>> Protocol of DlgWaitCD activities: <<<
=========================================

15:37:54 #9 Text 0 File ThreadedTransferInterface.cpp, Line 861
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2235568 (2235568) = #2235568/496:47.43
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2235568 blocks [G: HL-DT-ST DVDRAM GSA-T40N]
--------------------------------------------------------------

15:37:54 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1077
Prepare [G: HL-DT-ST DVDRAM GSA-T40N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4578443264, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2235568 | 0 | 0x00
2235568 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: DVD+R

15:37:54 #11 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

15:37:54 #12 Text 0 File Burncd.cpp, Line 4428
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

15:37:54 #13 PHASE 24 File dlgbrnst.cpp, Line 1857
Caching of files started

15:37:54 #14 Text 0 File Burncd.cpp, Line 4550
Cache writing successful.

15:37:54 #15 PHASE 25 File dlgbrnst.cpp, Line 1857
Caching of files completed

15:37:54 #16 PHASE 36 File dlgbrnst.cpp, Line 1857
Burn process started at 4x (5,540 KB/s)

15:37:54 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2850
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:37:54 #18 Text 0 File Cdrdrv.cpp, Line 10507
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..783]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
01 00 38 38 02 28 60 1A - 05 2E 23 10 04 1E 1D 01 ..88.(`...#.....
00 00 02 28 60 1A 05 2E - 23 10 04 1E 1D 01 00 00 ...(`...#.......
02 00 54 70 02 2E 62 3C - 24 14 0C 0C 01 20 00 00 ..Tp..b<$.......
00 00 02 3F 66 42 24 14 - 0C 0C 01 20 00 00 00 2F ...?fB$......../
03 00 54 DF 02 2E 62 3C - 24 14 0C 0C 01 20 00 00 ..T...b<$.......
00 00 02 76 63 58 24 14 - 0C 0C 01 20 00 00 00 66 ...vcX$........f
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:37:55 #19 Text 0 File DVDPlusRW.cpp, Line 637
Start write address at LBA 0
DVD high compatibility mode: Yes

15:37:55 #20 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

15:38:01 #21 SPTI -1135 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 00 02 20 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x70 00 03 00 00 00 00 0A 35 2D 03 0E 0C
Buffer x10120480: Len x10000
0x07 D2 00 00 00 01 00 00 00 00 00 00 00 01 00 00
0x07 D2 00 00 00 01 00 00 00 00 00 00 00 01 00 00
0x07 D2 00 00 00 01 00 00 00 00 00 00 00 01 00 00

15:38:01 #22 TRANSFER -20 File ThreadedTransfer.cpp, Line 1222
Could not perform Write

15:38:01 #23 CDR -1135 File Writer.cpp, Line 335
Write error
G: HL-DT-ST DVDRAM GSA-T40N

15:38:01 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 35 2D 03 0E 0C

15:38:01 #25 PHASE 127 File dlgbrnst.cpp, Line 1857
Generating DVD high compatibility borders

15:38:05 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 35 2D 03 0E 0C
Buffer x0410cb00: Len x20

15:38:05 #27 Text 0 File DVDPlusRW.cpp, Line 901
EndDAO: Last written address 544

15:38:05 #28 CDR -1135 File WriterStatus.cpp, Line 291
Write error
G: HL-DT-ST DVDRAM GSA-T40N

15:38:05 #29 TRANSFER -24 File ThreadedTransfer.cpp, Line 1222
Could not perform end of Disc-at-once

15:38:05 #30 Text 0 File DVDPlusDualLayer.cpp, Line 1462
SetDriveCaps: Set LAST LBA of layer 1 to 0

15:38:05 #31 PHASE 38 File dlgbrnst.cpp, Line 1857
Burn process failed at 4x (5,540 KB/s)

15:38:05 #32 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

15:38:05 #33 Text 0 File Cdrdrv.cpp, Line 11877
DriveLocker: UnLockVolume completed

15:38:05 #34 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Can anyone say me what is the problem???
Waiting for urs reply..!!

Burn process failed at 8x(11,080 KB/s)

Comment

Comment

Comment

Comment

Comment