DVD Shrink and Nero have problems burning with some disks.

[ccanalia]

I am really frustrated and I dont know what to do. I am backing up DVD's and have no problems with some and have problems with others. I dont know what the problem is but it appears that it is not the DVDs that I am using.

I am using I/O Magic 16X Dual Format/Double Layer DVD±RW/±R.

Does anyone have any idea what the problem could be? I have upgraded my Nero and my firmware on my DVD burner. I have unistalled other DVD burning utilities such as DVD XCopy Xpress and Sonic MyDVD. I have read other posts and cannot seem to figure what I am doing wrong.

Here is the log.


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <DVDRW IDE 16X> Version: A07R - HA 3 TA 0 - 6.6.0.8
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8483B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1212 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD1600JD-00FYB0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD400JD-75HKA1 atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8483 E: CDRom0
DVDRW IDE 16X G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 246MB (251996kB)
Free physical memory: 77MB (79660kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.3.2005
NeroAPI
7:22:20 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

7:22:21 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

7:22:21 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

7:22:21 PM #4 SCSI -1196 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x017A5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02

7:22:21 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

7:22:21 PM #6 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE 16X running

7:22:21 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

7:22:21 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

7:22:21 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

7:22:21 PM #10 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

7:24:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

7:24:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO

7:24:00 PM #13 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: MUST 0 - 01
Disc Application Code: 64, Disc Physical Code: 193

7:24:00 PM #14 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

7:24:00 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDRW IDE 16X]
--------------------------------------------------------------

7:24:00 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

7:24:00 PM #17 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

7:24:00 PM #18 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

7:24:00 PM #19 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

7:24:00 PM #20 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

7:24:00 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:24:00 PM #22 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

7:24:00 PM #23 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Super Link -> ON

7:24:01 PM #24 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

7:24:01 PM #25 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:24:01 PM #26 CDR -1207 File DVDR.cpp, Line 4772
Book Type automatically set to: Current recorder setting

7:24:08 PM #27 Text 0 File Cdrdrv.cpp, Line 1287
19:24:08.953 - DVDRW IDE 16X\H3 T0 : Queue again later

7:24:12 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x01650000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:24:12 PM #29 SCSI -1114 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x05D71400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

7:24:12 PM #30 CDR -1114 File Writer.cpp, Line 311
Reset occurred

7:24:12 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:24:12 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

7:24:13 PM #33 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 607

7:24:13 PM #34 Text 0 File DVDR.cpp, Line 5408
Drive: DVDRW IDE 16X
Book Type request [BTC]: DVD+RW
Changing the Book Type was finished successfully, return code 0

7:24:13 PM #35 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)

7:24:13 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

7:24:13 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 1/12/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Thanks for the help anyone can provide.


~Chris

[setarip]

"Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................"

This list of nothing but zeroes means that NERO is not recognizing the burnable media.

You might also consider using known quality burnable media, such as Ritek, Ridata, Verbatim, Maxell...

You might want to go to the burner's manufucturer's website and download and install the latest firmware update available for your specific model...

[jmet]

"Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................"

Your burner doesn't like the brand of media you are using. I am guessing its a cheaper brand of media. I suggest in Ritek Ridata brand media or Verbatim media.

"Book Type request [BTC]: DVD+RW
Changing the Book Type was finished successfully, return code 0
"

"Recorder: DVDRW IDE 16X, Media type: DVD-R"

Do not change the booktype for DVD-R media. Only for DVD+R media.

Check out this link: http://forum.digital-digest.com/show...threadid=45942

[ccanalia]

booktype

I am not entirely familiar with what "changing the booktype" is. Do I have to specify to the software what type of DVD media I have. And if so how am I supposed to do this?

~Chris

[Experi-Mentor]

## File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 1/12/2005 2:03:00 AM (Prassi/Veritas driver for win 2K) ##
also, you have rpassi/veritas (PXHELP20.SYS) driver on your system, which in most cases doesn't work good together with nero.

[ccanalia]

How do you remove something like that?

~C