Need help...Getting a burning error w/shrink plus nero

**cynthia** · 14 May 2005, 02:59 PM

Hi and welcome to the forum, terrell1906!

Disable the checkbox in the Backup section of DVD Shrink 'Book type DVD-ROM'.

The media code of your brand of discs is not supported by the firmware. Either try to install a modified firmware that supports your Ritek discs and/or try to burn at 4x speed.

**jm1647** · 15 May 2005, 07:53 AM

@cynthia - When I use -r media in my Lite-On's, shrink has the burn as dvd-rom greyed out. It looks like he has the book type selected in the EEPROM of his NEC. Will the NEC booktype -r media to dvd-rom?

Thanks

**blutach** · 15 May 2005, 09:11 AM

If it's greyed out, then there's no worry. It means you can't set or unset it.

NEVER try to set a -R to DVD-ROM.

Read the golden rules of burning in my sig.

Regards

**jm1647** · 15 May 2005, 10:19 AM

blutach Yup, I know but in his log it says

Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

and he is using -r media

Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R

I was just wondering if he modded his firmware to do the bookset at dvd-rom and that is why it didn't work. I'm not familiar with NEC's and with the LiteOn's shrink is smart enuff to grey it out.

**blutach** · 15 May 2005, 10:33 AM

Means it didn't change the booktype.

But yes, it should be unticked for -R, if it isn't greyed out.

Regards

**setarip** · 15 May 2005, 11:06 AM

To jm1647

"I was just wondering if he modded his firmware to do the bookset at dvd-rom and that is why it didn't work."

No - His/Her drive is probably capable of bitsetting DVD+Rs (NOT all burners have this capability), so he/she probably selected it from within NERO - even though a DVD-R cannot be bitset...

(Kinda like trying to find 6 more Mb on a DVD+R ;>})

**jm1647** · 15 May 2005, 11:32 AM

@setarip _ Yeah, theres a couple programs for the LiteOn's (Omnipatcher and Kprobe to set the booktype. I normally use -r media for compatability purposes so I don't hafta worry bout it much.

There's them tech guys again..why not just have it say at the beginning "Yo! Ya can't set -r to dvd-rom"

And I thought shrink had the capability to bookset but was smart enuff to see there was a -r in the drive. I just tried to burn a +r with shrink and nero and the burn as dvd-rom had the check box checked but it was greyed out. Same as it is when I use -r

Learned something else again today.

Now wheres that 6 more Mb, where did it go ? Yup some of my DVD's have 4.35GB free space some others 4.38
Compatability....just like them tech writers

**cynthia** · 15 May 2005, 11:48 AM

Originally posted by jm1647
@cynthia - When I use -r media in my Lite-On's, shrink has the burn as dvd-rom greyed out. It looks like he has the book type selected in the EEPROM of his NEC. Will the NEC booktype -r media to dvd-rom?

Thanks

This is my first burning with my Nec 3520 - as you can see we have the same try to use bitsetting/book mark on a -R disc. This 'feature' can be deselected in the option menu in Nero. Obviously it's turned on as default. Original firmware from Nec don't handle bitsetting. So the error codes given in his burning log is not the cause of the problems - as you can see in my log i didn't get a real burning error due to this 'feature'.

This is my first burning using Fuji -R 8X media - the problem is that the firmware don't recognize the media - uses a generic write strategy. So goodbye Fuji.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002-07-17 11:03:20
ahead WinASPI: File 'C:\Program\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 18:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD163 >Version: GH5Y - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG VG36483A (6.48GB) atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD163 atapi Port 1 ID 1 DMA: On
DiskPeripheral : ST3160023A 3.06 hpt374 Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 hpt374 Port 2 ID 1 DMA: Off
DiskPeripheral : ST380021A 3.19 hpt374 Port 2 ID 2 DMA: Off
DiskPeripheral : ST3250823A 3.02 hpt374 Port 2 ID 3 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 hpt374 Port 2 ID 4 DMA: Off
OtherPeripheral : HPT RCM DEVICE hpt374 Port 2 ID 0 DMA: Off
OtherPeripheral : HPT RCM DEVICE hpt374 Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3520A E: CDRom0
JLMS XJ-HD163 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 113MB (116428kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.4.2005
UDF/ISO kompilering
04:14:47 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

04:14:47 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

04:14:47 #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

04:14:47 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

04:14:48 #5 Text 0 File Reader.cpp, Line 127
Reader running

04:14:48 #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3520A running

04:14:48 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

04:14:48 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

04:14:48 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

04:14:48 #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1849775 (411:03.50, 3612MB)

04:14:48 #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

04:14:48 #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193

04:14:48 #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

04:14:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1849776 (1849776) = #1849776/411:3.51
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1849776 blocks [_NEC DVD_RW ND-3520A]
--------------------------------------------------------------

04:14:48 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3788341248, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1849776 | lead-out | 1 | 0x41 | 0x00

04:14:48 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

04:14:48 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

04:14:48 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

04:14:48 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11_080 KB/s)

04:14:48 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

04:14:48 #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

04:14:48 #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON

04:14:48 #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

04:14:48 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

04:14:48 #25 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

04:14:48 #26 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

04:14:48 #27 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

04:14:48 #28 Text 0 File DVDR.cpp, Line 5061
Drive: _NEC DVD_RW ND-3520A
Book Type request [NEC]: Physical disc type
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

04:14:50 #29 Text 0 File Cdrdrv.cpp, Line 1287
04:14:50.753 - _NEC DVD_RW ND-3520A\H1 T0 : Queue again later

04:23:08 #30 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-3520A > start writing Lead-Out at LBA 1849776 (1C39B0h), lenght 0 blocks

04:23:08 #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

04:23:09 #32 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 1849775

04:23:27 #33 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

04:23:27 #34 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

04:23:27 #35 Text 0 File DVDR.cpp, Line 5061
Drive: _NEC DVD_RW ND-3520A
Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

04:23:27 #36 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11_080 KB/s)

04:23:27 #37 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

04:27:52 #38 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

04:27:52 #39 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully

**jm1647** · 15 May 2005, 12:14 PM

@cynthia - Thanks - I see what ya mean, the booksetting failed but the burn was successful. With all the hacks for different drives going around...., now I see when you select it in Nero the eeprom requests it .

If I keep gettin' taught and learning all these things is my head gonna burst

**setarip** · 15 May 2005, 04:06 PM

To jm1647

"If I keep gettin' taught and learning all these things is my head gonna burst"

Just go down the Shore and fawgeddaboudit ;>}

**blutach** · 15 May 2005, 06:28 PM

There's an awful lot to learn jm and just think, in a few years all the technology would have changed anyway

Regards

**jm1647** · 17 May 2005, 03:59 AM

@setarip - The shore and the ocean is ok but the casino's is what gets me in trouble. To fawgeddaboudit it usually takes 'bout a 30 pack of Red Dog

@blutach A lot to learn....you got that right but you and everybody else here make the learning process a little easier.

Need help...Getting a burning error w/shrink plus nero

Need help...Getting a burning error w/shrink plus nero

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment