Could someone check my error log

**Alien Bay** · 3 Jun 2005, 09:37 AM

7:24:20 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

Did a google search for this error here Obviously, the first one in this selection suggesting defraggin your drive wouldn't apply to you but check them out.

This caught my attention. Have you changed media?

Could not perform end of Disc-At-Once error

http://forums.afterdawn.com/thread_view.cfm/189650

Hi, Ive just bought a new DVD writer drive and am having alot of problems with it. Firstly I kept having 'communication error' when I tried to burn CDs...

**setarip** · 3 Jun 2005, 10:04 AM

The following lines are of interest and/or anomalous:

"7:11:16 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process."

"Recording mode: Sequential Recording Mode for Multisession"

"DVD high compatibility mode: No"

"Reset occurred"

"(InCD4 driver for win NT/2K/XP)"

1) What mode are you using in NERO?

2) UNinstall InCD - It (a packet-writing program) has been indicated in MANY posts, at these and other forums, to cause problems when using NERO to burn

3) What is your source material that you are trying to burn a copy of?

Be wary of highly opinionated and often unsubstantiated statements made in response to your questions at these forums...

**grigsby** · 3 Jun 2005, 10:18 AM

thank you both for posting replies so quickly. I just started the defrag process and was somewhat amused to find the HD with vast portions of fragmented files......so maybe that was my cause.

After that I will check off the list from the second post....thanks again.

**Alien Bay** · 3 Jun 2005, 10:45 AM

Originally posted by setarip

"Recording mode: Sequential Recording Mode for Multisession"

"Reset occurred"

Be wary of highly opinionated and often unsubstantiated statements made in response to your questions at these forums...

Setarip, I also noticed the Sequential Recording..for Multisession. Is that message incompatible with burning a Disk at Once? Why is that message anomalous?

Also, the 'reset occured'.. is that the same reset as referred to here ? Thanks in advance

**Alien Bay** · 3 Jun 2005, 10:49 AM

Originally posted by grigsby
thank you both for posting replies so quickly. I just started the defrag process and was somewhat amused to find the HD with vast portions of fragmented files......so maybe that was my cause.

After that I will check off the list from the second post....thanks again.

You're welcome. Curious that you're finding vast portions of fragment files. Your original post mentioned formatting the hard drive...I assumed that wasn't the problem.

Setarips pointing out the 'reset' message may warrant looking at.

**grigsby** · 3 Jun 2005, 11:31 AM

Originally posted by Alien Bay
You're welcome. Curious that you're finding vast portions of fragment files. Your original post mentioned formatting the hard drive...I assumed that wasn't the problem.

Setarips pointing out the 'reset' message may warrant looking at.

the dvd drives are in my wifes computer upon reformating her computer she brought over a lot of her mp3 files and they were the cause of the vast portions of fragmented files.

So far i have defraged the HD removed the InCd software and attempted another burn with the same results....

I have burned many many discs before her computer crashed on her....only now is it a problem.

Here is the most recent error log...

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A106 - HA 3 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160M0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
HL-DT-ST DVDRAM GSA-4040B F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 351MB (360144kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.6.2005
NeroAPI
10:10:44 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

10:10:44 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

10:10:44 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

10:10:44 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

10:10:44 PM #5 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

10:10:44 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

10:10:44 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

10:10:44 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

10:10:44 PM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

10:10:44 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

10:10:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

10:10:44 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

10:10:44 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:10:44 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

10:10:44 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

10:10:45 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

10:10:45 PM #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

10:10:45 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

10:10:45 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2x (2,770 KB/s)

10:10:45 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:10:45 PM #21 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode for Multisession

10:10:45 PM #22 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

10:10:45 PM #23 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: No

10:10:45 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:24:05 PM #25 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x00C50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x10 0x56 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x0C 0x29 0x00

10:24:06 PM #26 CDR -1114 File Writer.cpp, Line 311
Reset occurred

10:24:06 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:24:08 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:24:08 PM #29 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 1070687

10:24:08 PM #30 Phase 133 File APIProgress.cpp, Line 276
Writing short lead-out

10:24:08 PM #31 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x5B 0x01 0x00 0x0C 0x72 0x04

10:24:08 PM #32 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

10:24:08 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

10:24:09 PM #34 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2x (2,770 KB/s)

10:24:09 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

10:24:09 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/28/2005 10:05:10 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**setarip** · 3 Jun 2005, 02:53 PM

Again:

1) What mode are you using in NERO?

2) What is your source material that you are trying to burn a copy of?

Be wary of highly opinionated and often unsubstantiated statements made in response to your questions at these forums...

**grigsby** · 3 Jun 2005, 09:36 PM

Not sure what mode Nero is operating in.....In the past I just let dvdshrink call it up. Where or what do I need to check in Nero to be sure the correct Mode is selected?

As for source material I am working on Meet the Fockers, but in the past few days I have tried others with similiar results.

Thanks for the on-going assistance.

**setarip** · 4 Jun 2005, 02:08 AM

"Not sure what mode Nero is operating in.....In the past I just let dvdshrink call it up."

As long as you're using DVD Shrink to automatically access NERO, it's in the correct mode ("DVD-Video")

"As for source material I am working on Meet the Fockers, but in the past few days I have tried others with similiar results."

Are these original, commercial DVDs or "something else"?

Be wary of highly opinionated and often unsubstantiated statements made in response to your questions at these forums...

**grigsby** · 4 Jun 2005, 04:10 AM

yes the source material is an original.....and I have managed to decrypt it just fine. And it has been my experience that if you can get it decrypted then you can burn it......but that notion has been thrown out the window on account of my recent obstacles....

**setarip** · 4 Jun 2005, 04:57 AM

If your drive is an external one, connected via a USB port, the following is quoted from the DVD Shrink "FAQ" section of these forums (regarding "Reset occured" problems):

"In most cases, users have found that updating the drivers for the USB Controller resolves the issue. Other found a new External Chassis for the Recorder resolved the issue. And we provided a work around in our MMC.DLL file that causes our software to reissue the command till the recorder is free and accpets, instead of timing out so soon after a lack of response from the device. This resolved the issue for some, but not for others. This MMC.DLL file is part of Nero 6.6.0.3 and above builds.

Try to disconnected all USB devices except for the external DVD burner.

As a last resort, after trying the above solutions and others, they finally connect as an internal to the system and all issues are resolved."

Be wary of highly opinionated and often unsubstantiated statements made in response to your questions at these forums...

**Frankensmith** · 2 Aug 2005, 01:28 PM

If your problems continue, here's a bit of info I posted in another forum. It sounds nuts, so please don't negatively critisize before trying out the 'fix' ... (it worked for me): - quote below -

You're gonna LOVE THIS!!! I found 'the fix' ... and it's surprisingly simple. I kept getting 'fixation errors' intermittently. Changed drive layouts, tested different ASPI layers, tried different media, uninstalled software, reinstalled, etc.. Still, I would get these errors intermittently. And sometimes, one right after another.

You will not believe this. But, next time you get a fixation error, check which FOLDER in Windows Explorer is highlighted. Guaranteed ... it's the FOLDER you're burning to CD or DVD. For whatever reason, Nero (in my case) will NOT complete the cd/dvd if the source folder is being accessed by Windows Explorer.

I happened to notice this 'goofy' event and 'suspected' it may be the problem to fixation errors. Sure enough, I would delete something else and the file I was about to burn was suddenly highlighted in Windows Explorer. EVERY TIME that FOLDER was highlighted, I would get a fixation error. EVERY TIME I highlighted a DIFFERENT FOLDER, the disk would burn perfectly.

Again, I know this sounds TOO simple to be the problem. Remember, next time you get a fixation error, before doing anything else, check Windows Explorer and see what FOLDER is highlighted. I would guess the same would be true for those who use "My Computer" rather than Windows Explorer.

After you've discovered I'm not a 'troll', please pass on the information to others who are having the same problem. I have a few hundred wasted cd's from 'rediculous' issues such as this. Hate to see anyone else have similar headaches.

Enjoy ...

FS

**Frankensmith** · 2 Aug 2005, 01:32 PM

(... then again, one could 'criticise' my 'ridiculous' spelling

... it was a 'long day' when I wrote that. Just got around to spell checking.

FS

**LT. Columbo** · 2 Aug 2005, 01:57 PM

no need to spell check here....as long as it is legible

Could someone check my error log

Could someone check my error log

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment