burning

[com284]

Thanks. I have a new problem now. I just bought a 25 Pack of Memorex DVD+RW. THey only burn at 2.4X. Anyway when i burn using them i keep getting a focus or tracking error about 20% into the burning. I put in a Memorex DVD+RW 4x disc and it burned with no problem... Its very frustrating. I at least would have hoped that it wouldn;t burn on anything then i could pinpoint the problem.

[jm1647]

Check the media code and see if they are they same. The Memorex +rw I have are RICOHJPNW11 Post your Nero Log. It's the NeroHistory.log file in the Ahead/nero directory

[Experi-Mentor]

** I just bought a 25 Pack of Memorex DVD+RW. THey only burn at 2.4X **

what speed are they suppose to be ?

you may want to look around for a compatible burner firmware to match it with your newer/slower +rw media

[jm1647]

For Memorex DVD+rw check out this link here

[com284]

Burning

Ok , now this is weird. I decided to use Pinnacle to burn the files as a UDF. It burned on the DVD+RW 2.4x with no problem. Then i went back to Nero and burned like i did before as a movie DvD and it worked i didn't get any errors. It has worked on 2 Blanks so far. I have no idea why it worked.Any suggestions???

[jmet]

Perhaps a reboot?

[com284]

burning

here is the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero version: 6.6.0.3
Recorder: <GENERIC DVD RW 8XMax> Version: 130I - HA 2 TA 0 - 6.6.0.3
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HITACHI DVD-ROM GD-S200 >Version: 0034 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23BA-20B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HITACHI DVD-ROM GD-S200 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HITACHI DVD-ROM GD-S200 D: CDRom0
GENERIC DVD RW 8XMax E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 32505856 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 191MB (196080kB)
Free physical memory: 41MB (42952kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.6.2005
UDF/ISO compilation
2:40:49 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

2:40:49 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

2:40:49 PM #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:40:49 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

2:40:49 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

2:40:49 PM #6 Text 0 File Writer.cpp, Line 122
Writer GENERIC DVD RW 8XMax running

2:40:49 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

2:40:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

2:40:49 PM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media

2:40:50 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285961 (507:59.36, 4464MB)

2:40:50 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

2:40:50 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: GENERIC DVD RW 8XMax, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0

2:40:50 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:40:50 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [GENERIC DVD RW 8XMax]
--------------------------------------------------------------

2:40:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [GENERIC DVD RW 8XMax] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 386990080, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

2:40:51 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

2:40:51 PM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

2:40:51 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

2:40:51 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

2:40:52 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:40:52 PM #21 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: INFODISC
Media type ID: A01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 49 4E 46 4F 44 - 49 53 43 41 30 31 01 39 ...INFODISCA01.9
23 00 8E 7A 56 02 1A 00 - 90 83 64 02 1E 00 86 7E #..zV.....d....~
5E 02 1E 04 04 10 F0 00 - 00 00 00 00 00 00 00 00 ^...............

2:40:52 PM #22 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes

2:47:45 PM #23 SCSI -1039 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x038F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x01

2:47:45 PM #24 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error

2:47:45 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

2:47:45 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

2:47:45 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)