Disc at once error

[jessesc123]

Anyone run into this one?
Could it be that I ran out of write room on 4.5 disc?
Shrink showed it to be ok, then at last of burn got this error?
Here is the file error page, if this helps.
Any info is apreciated.








12:59:51 PM #26 CDR -1039 File WriterStatus.cpp, Line 163

Focus or tracking error



12:59:51 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 163

Could not perform end of Disc-At-Once



12:59:51 PM #28 Phase 38 File APIProgress.cpp, Line 224

Burn process failed at 8x (11,080 KB/s)



12:59:51 PM #29 Text 0 File Scsicmd.cpp, Line 406

SCSI not using temporary buffers

20 out of 20 temporary buffers allocated



Existing drivers:

File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com[img] /><st1:date w:st=[/img]10 02 38</st1:date> 6A 02 88 - 67 15 15 0B 0B <st1:date w:st=" /><st1:date w:st="on" ls="trans" Month="8" Day="17" Year="2001">8/17/2001</st1:date> 2:07:32 PM

File 'Drivers\PXHELP20.SYS': Ver=2.03.13b, size=20576 bytes, created <st1:date w:st="on" ls="trans" Month="7" Day="27" Year="2004">7/27/2004</st1:date> 2:03:00 AM (Prassi/Veritas driver for win 2K)

<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com[img] /><o></o>




<o></o></P>

</P>

Registry Keys:</P>

</P>

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) </P>

</P>

<o></o></P>

[jessesc123]

Tried,Ulead,Sonic,Neroexpress5

All end up with an error at the very end of burning,the fixating, or finalizing.
I can watch the Folder just fine.
I used lastest version of Decreptor and Shrink lastest version.
Just can't git it to finalize the burn.
Capatability of disc was checked also.
Ulead Movie Factory 4
MyDVD deluxe 6
Ulead studio 9
Nero express 5
Am I actualy running out of write space?
Hope some one can help.
I can Burn pictureshow DVD's
And Camera capture DVD's
I am stummped here.
I tried even re-shrink. Same result.
Tried different burners , sony and Iomega(toshiba)
I need the experts out there.

[setarip]

Welcome to the Digital Video Forums of Digital Digest!

"Focus or tracking error"

From the NERO website ("Error Messages"):

"14. What do I do if I get a 'Focus servo failure' message?

The "Focus servo failure" message is a hardware error. It can be caused by the following:

Poor media - Try more than one brand of CD-R media to rule this out as cause.
Poor power - The power to your recorder could be fluctuating. If you have an internal recorder, try a different power connector and make sure it's not being shared by any other devices. If you have an external recorder, if possible, remove it from the external chassis and connect it to your system as an internal recorder. If this resolves your issue, you need to replace or repair the power source in your external chassis.
Optical head is dirty, needs alignment, or recorders circuit board has an open coil - please contact your recorder manufacturer to service your unit."

AND

"8. Why do I get a 'Track following error' message?

The "Track following error" message is a hardware error. It can be caused by the following:

Poor media - Try more than one brand of CD-R media to rule this out as cause.
Poor power - The electric power supply of your recorder could be fluctuating. If you have an internal recorder, try a different power connector and make sure it's not being shared by any other devices. If you have an external recorder, remove it from the external chassis, if you can, and connect it on your system as an internal recorder. If this resolves your issue, you need to replace or service the power source in your external chassis.
Optical head is dirty or needs alignment - Please contact your recorder manufacturer to service your unit."

[jessesc123]

The 2 drives I tried have different power source.
Internal and an external
I will try the Media possibility and the 2-4x burning.
Will nero 6 be ok to try? Did not see the option to burn off HD folder
Or can I get Shrink to send to Nero for burn without having to re-compress it?

[jessesc123]

Sorry I forgot to thank you for your help. I do apreciate it much.
I am new to trying to do this type.

[setarip]

"Or can I get Shrink to send to Nero for burn without having to re-compress it?"

Yes - Edit>>Preferences>>File I/O Put a checkmark next to "Enable burning with NERO"


"thank you for your help. I do apreciate it much."

My pleasure ;>}

[jessesc123]

Yahoo ! I got it to work.

I was using HP invent disc
and I have the Sony DVD-R
So I tried the Sony with the Shrink did its thing and Neroexpress burned it with success and it looks great on my 50 inch.
I cant believe I wasted 6 discs on this.
I guess media can make a worl of difference.
Thanks so so much.

[setarip]

"Yahoo ! I got it to work."

Congratulations on your success!

"I guess media can make a worl of difference."

You betcha...

"Thanks so so much."

My pleasure ;>}