Burning Errors

[terrell1906]

Need help...anytime I burn a movie after using DVD Shrink I get these errors: Please tell me what it means and what I must do to correct the problem...Thanks in Advance!!!

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c

Recorder: <DVDRW IDE1108> Version: B130 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD200AA atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380013A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : COMPAQ CD-ROM LTN403 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1108 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN403 D: CDRom0
DVDRW IDE1108 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523824kB)
Free physical memory: 192MB (197096kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.8.2005
NeroAPI
5:26:52 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

5:26:53 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

5:26:53 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

5:26:54 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

5:26:54 PM #5 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE1108 running

5:26:54 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

5:26:54 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

5:26:55 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

5:26:55 PM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

5:27:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2018911 (448:38.61, 3943MB)

5:27:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

5:27:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: DVDRW IDE1108, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193

5:27:32 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD-ROM. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

5:27:32 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2018912 (2018912) = #2018912/448:38.62
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2018912 blocks [DVDRW IDE1108]
--------------------------------------------------------------

5:27:32 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVDRW IDE1108] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4134731776, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2018912 | lead-out | 1 | 0x41 | 0x00

5:27:33 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

5:27:33 PM #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

5:27:33 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

5:27:33 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)

5:27:33 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:27:33 PM #21 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

5:27:33 PM #22 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Super Link -> ON

5:27:33 PM #23 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

5:27:33 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:27:41 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
17:27:41.959 - DVDRW IDE1108\H1 T1 : Queue again later

5:32:22 PM #26 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04350000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0D 0x73 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

5:32:22 PM #27 CDR -1114 File Writer.cpp, Line 311
Reset occurred

5:32:22 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:32:22 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

5:32:22 PM #30 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 881503

5:32:22 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)

5:32:22 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

5:32:22 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[cynthia]

There is an update for your burner: http://forum.rpc1.org/dl_firmware.php?download_id=1798

That error message is normally only showing up when you have an USB burner attached. I that you don't have.

Have you done any good DVD burnings with that burner before?

[LT. Columbo]

according to a meatball at nero...a "reset occured" error can also be triggered by cheap media burned to fast (8x)

"Disc Manufacturer: Prodis - cF01"

[terrell1906]

Burned all the time until 2 weeks ago

I have burned several movies with this burner at (8X). I have losted about 28 discs from errors in the last week. I read all types of threads but none seems to help. I only purchase DVD-R Sony or Memorex.

[terrell1906]

Upgrade not allowed

My firmware is DQ24...B130...and when I tried to upgrade this is the message

This firmware can be used on below drives :
(1) DVDRW IDE1108 .
(2) DVD-RW 1108IB .
CD-ROM drive model doesn't match!!

The upgrade box is not allowed

[LT. Columbo]

28 discs???????? do yourself a favor and buy an rw disc and use it untill this is resolved.. seriously. there is no reason on gods green acres anyone should make more than 1 coaster at a time. the brand you buy is not nearly as important as the ID code in them.

good sony discs for example that i use have the ID code "08d1" (sony dvd-r 1x-8x). what you ought to do is upgrade the firmware like cynthia told you, use a GOOD quality disc and burn it at 2x or 4x.

EDIT:

"My firmware is DQ24...B130...and when I tried to upgrade this is the message

This firmware can be used on below drives :
(1) DVDRW IDE1108 .
(2) DVD-RW 1108IB .
CD-ROM drive model doesn't match!!

The upgrade box is not allowed"

i remember you now, you have the same problem in another one of your threads.

[terrell1906]

Yes, now at 30 lost discs

Well I tried to upgrade my B130 but its not allowing me to. Which BTC is the one I need...

# BTC DRW 1008IM (DVDRW IDE1008, DVD-RW 1008IB)
Currently RPC1 firmwares based on 0052, 0054, 0055, 0156, 0256, 0157, 0257, 0357, 0457, 0557, 0657, 0258, 0358, 0458, 0558, 0658, 0758, 0059, 0159, and 0060.
# BTC DVDRW USB1008UI
Currently RPC1 firmwares based on 0057, and 0058
# CREATIVE DVDRW DR8420E (OEM BTC DRW 1008IM)
Currently RPC1 firmwares based on 0053, 0055-Synthesized, 0156-Synthesized, 0256-Synthesized, 0257-Synthesized, 0357-Synthesized, 0557-Synthesized, and 0059-Synthesized
# MITSUMI DW-7872TE (OEM BTC DRW 1008IM)
Currently RPC1 firmwares based on 0156-Synthesized, 0256-Synthesized, 0257-Synthesized, 0357-Synthesized, 0557-Synthesized, and 0059-Synthesized
# FREECOM DVD+/-RW8K (OEM BTC DRW 1008IM)
Currently RPC1 firmwares based on 0156-Synthesized, 0256-Synthesized, 0257-Synthesized, 0357-Synthesized, 0557-Synthesized, and 0059-Synthesized
# MEMUP IDE1008 (OEM BTC DRW 1008IM)
Currently RPC1 firmwares based on 0054, 0257-Synthesized, 0357-Synthesized, 0557-Synthesized, and 0059-Synthesized
# BTC DRW 1108IM (DVDRW IDE1108, DVD-RW 1108IB)
Currently RPC1 firmwares based on B014, B116, B118, B218, B120, B225, and B028
# BTC DVDRW USB1108
Currently RPC1 firmware based on B218

[terrell1906]

Which one do I need to upgrade my firmware? thanks

Fri Apr 02, 2004 2:37 am BTC DRW 1108IM
BTC DRW 1108IM - B014, B116, B118, B218, B222, B225, B028, B328, B029, B129, B030, B130, B230, B330, B430
Region Free (RPC-1) firmware is available here. Patched by The Dangerous Brothers.
RPC-2
Edited by: Arzeno Last update: Sat Apr 23, 2005 9:26 am