Someone Help! Illegal Disk??Burn Failure

[LD!]

LD - that's the way most people do it. They decrypt to hard drive, shrink and burn.

Regards

I understand.I just wish when i was using shrink i could just use my burner as the destination, rather than have to come back to my comp after the files have been transferred, pop out a disk then throw in a blank and start a process.Not a biggie.Just rather do everything in one step.

[LT. Columbo]

"Ok, so i went ahead and got the v.JWS6 firmware and installed it, I then went and updated my Nero to the 6.6 and Biggity Bam!No more illegal disk failure! The disk goes ahead and burns, but then it only plays for about ten minutes and the scene selection features freeze up.I tried popping it into different DVD players, no go.I'm gonna give it another shot."

GOOD TO HEAR, BUT TO GET RID OF THE FREEZING I THINK ALL YOU HAVE TO DO IS USE A BETTER MEDIA LIKE SONY OR VERBATIM AT 2X OR 4X

the caps were a mistake , no yelling here...

[LD!]

Well, i had another failure after all the updates going thru DVD shrink and directly thru Nero.This is what i got last while using a slow burn speed 2x sending files to nero:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS6 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG DVD-ROM SD-616F >Version: F100 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV6003H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-224B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-224B E: CDRom0
SAMSUNG DVD-ROM SD-616F F: CDRom1
Memorex DVD16+/-DL4RWlD2 H: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 223MB (228724kB)
Free physical memory: 69MB (71360kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.9.2005
UDF/ISO compilation
4:13:24 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

4:13:24 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

4:13:24 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

4:13:24 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

4:13:24 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

4:13:24 PM #6 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD16+/-DL4RWlD2 running

4:13:24 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

4:13:24 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

4:13:25 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

4:13:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

4:13:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

4:13:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

4:13:47 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

4:13:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [Memorex DVD16+/-DL4RWlD2]
--------------------------------------------------------------

4:13:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

4:13:47 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:13:47 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

4:13:47 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:13:47 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

4:13:47 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:13:47 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

4:13:47 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

4:13:47 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

4:13:47 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:14:07 PM #25 Text 0 File Cdrdrv.cpp, Line 1286
16:14:07.030 - Memorex DVD16+/-DL4RWlD2\H2 T0 : Queue again later

4:21:33 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07030000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x07 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

4:21:33 PM #27 CDR -1046 File Writer.cpp, Line 311
Illegal disc

4:21:33 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:21:34 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:21:34 PM #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1823

4:21:34 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 6/4/2005 9:52:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Guys, I'm seriously going outta my mind here.I've wasted s#itloads of disks and i'm about to throw the damn burner out the window.

[2COOL]

Is your Memorex DVD16+/-DL4RWlD2 an internal drive in an external enclosure? Or it was an external when you bought it at the store.

[LD!]

It's an external bought at store.

[2COOL]

How's your driver for your external? Current?

[LD!]

yah, as far as i know.

[2COOL]

I'm running out of suggestions. How about you just drop Nero and try burning with DVD Decrypter? I want to know if your Nero is giving you grief.

[LD!]

I'll give it a shot man, it's pretty fustrating.

[LD!]

I just tried opening DVD Decrypter (while there was nothing in my drive) and i got this error:

I/O Error!
Scsi Status:0x02
Interpretation:Check Condition
CDB:28 00 00 11 77 9c 00 00 01 00
Interpretation:Read(10)-Sector1144732
Sense Area:70 00 03 00 00 00 00 0a 00 00 00 00 11 05 00 00 00 00
Interpretation:L-EC Uncorrectable error
So i don't know what the hell thats all about.Other than Roxio are there any other programs that could give me any trouble such as a MusicMatch Jukebox or anything?I'm currently trying to read all the FAQ's posted on this board.

[LD!]

Afterthought PT2:

Something else thats driving me nuts is the fact that a few days ago i used an old version of Nero to burn the movie "Hostage".Shrank it and then just clicked and dragged the files into the video ts folder and it worked fine.but every other friggin thing i've done hasn't worked.Why was i able to burn one dvd so darn easy and everything else fails over and over. ah well, i'm ranting, back to the experimenting i go.

[LD!]

ok heres my latest attempt.I went into dvd shrink,backup, then selected my backup target as: Iso Image File and Burn with DVD Decrypter.Then as usual and always it failed while writing the lead-in and i got this:

I/O ERROR!
Device:[0:0:0]Memorex DVD 16+/-DL4RWID2JWS6 (H) (USB)
SCSI STATUS:0x02
INTERPRETATION:CHECK CONDITION
CDB:2A 00 00 00 04 A0 00 00 20 00
INTERPRETATION:WRITE(10) SECTORS:1184-1215
SENSE AREA:70 00 02 00 00 00 00 0A 00 00 00 00 30 05 00 00 00 00
INTERPRETATION:CANNOT WRITE MEDIUM-INCOMPATIBLE FORMAT

everything appeared compressed and decrypted. So I dunno.I get Illegal disk errors thru Nero and shrink and now this with decrypter.I'm one bummed out dude.
God i need serious help here.

[blutach]

the caps were a mistake , no yelling here...

But how do we know you weren't yelling?

Regards

[BSpielbauer]

Taelon, as far as the Roxio thing. I can't find it!I search my system for it and all that comes up is logs of my installation and uninstall of the program from december 2003.

To clarify, it would appear that your "uninstalls" left some of the Roxio drivers installed. This happens. More often than we think, in fact.

And, the conflicts which have been reported supposedly are due to some of the drivers that Roxio installs having a conflict with some of the drivers that Nero installs. In some cases, these were drivers that replaced a Microsoft driver that came with Windows. Those drivers are often used by Windows even when you are not necessarily running their particular software. And, they may not uninstall, since you need the drivers for OTHER purposes, sometimes...

As I mentioned, there are LOTS of people who have both running, with no problem. Literally thousands. But, there are too many who do have a problem; Nero describes it as a problem only on "certain systems." And, the most common reported symptom of the conflict (from what I have read) is the report of an "illegal disc" early in a burning process, immediately after the initial "lead in" has been written.

-Bruce

[blutach]

Here is your problem

Disc Manufacturer: CMC MA - G. AE1

The worst disks ever made! Garbage. Get better media.

Regards