I burn 3x still fail !

[droozy]

This is my latest nero log with successful burn 100% gd with surface scan

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <TOSHIBA DVD-ROM SD-R6112>Version: 1031 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-R6112>Version: 1031 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R6112 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 495MB (507376kB)
Free physical memory: 245MB (251212kB)
Memory in use : 50
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.1.2006
UDF/ISO compilation
1:34:26 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

1:34:26 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

1:34:26 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

1:34:26 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

1:34:26 AM #5 Text 0 File Reader.cpp, Line 127
Reader running

1:34:26 AM #6 Text 0 File Writer.cpp, Line 122
Writer TOSHIBA DVD-ROM SD-R6112 running

1:34:27 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

1:34:27 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

1:34:27 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

1:34:27 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2135823 (474:37.48, 4171MB)

1:34:27 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

1:34:27 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TOSHIBA DVD-ROM SD-R6112, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

1:34:27 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:34:27 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2135824 (2135824) = #2135824/474:37.49
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2135824 blocks [TOSHIBA DVD-ROM SD-R6112]
--------------------------------------------------------------

1:34:27 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TOSHIBA DVD-ROM SD-R6112] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4374167552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2135824 | lead-out | 1 | 0x41 | 0x00

1:34:27 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

1:34:27 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

1:34:27 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

1:34:27 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

1:34:27 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:34:27 AM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

1:34:27 AM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

1:34:27 AM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

1:34:27 AM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2:28:26 AM #25 Text 0 File WriterStatus.cpp, Line 116
<TOSHIBA DVD-ROM SD-R6112> start writing Lead-Out at LBA 2135824 (209710h), lenght 0 blocks

2:28:26 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

2:28:27 AM #27 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 2135823

2:29:39 AM #28 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 1/13/2006 8:22:38 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[drfsupercenter]

Putting a pic is simple. Go to http://imageshack.us - then click Browse, select your file and hit Upload. Then use where it says "hotlink for forums" or "thumbnail for forums", copy that texy This is a type 1 forum (don't use the second or type 2 one).

Paste that text here and submit. Viola!

[Chewy]

File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 1/13/2006 8:22:38 PM (Prassi/Veritas driver for win 2K)

nice to know droozy even with this you got it to work!

good media!

[drfsupercenter]

Chewy, is there another page for firmware for my CD burner? I kinda wanted it to burn faster.

[Chewy]

DRF,
If you study cd burners you will find a very expensive model used to
be king of the hill, the plextor premium with 8MB cache, we used to keep
3 or 4 working at our shop, did a lot of mobile and internal DJ stuff!
A little over a year ago I tested a nec 3520 dvd burner against the plex
cd burner. The plex had been 100$, the nec 40$, the nec won!
That makes your cdburner spare change(moral of this story).

[drfsupercenter]

Yeah either way I don't have enough money to buy myself a new burner... and it is nice to do on the fly copying. That one firmware site does not allow me to download the firmware, is there another one?

[Chewy]

try again, their servers are very busy, and save don't open!

[droozy]

nice to know droozy even with this you got it to work!

good media!

huh ? Chewy.. so actually happen to my problems previously ? What does that statement that you have highlight cause any problem ?

Pls enlighten me . Re transfer

[droozy]

Hi Chewy ..

But my transfer test looks like the one posted by blutach on his link on " HOw to test the disc with nero " Still drive faulty "..anyway very funny.. and now when I wanted to do a transfer test it says unrecovered read error 031100

Sometimes I can do transfer test , sometimes I cant.. ????

Is it because my fiiles were in my external hdd " or I really have 5 dvd faulty ??? All verbatim disc ??

Chewy can u teach me how to put a pic on the website so tat I can show u sometime .My chapter 6 only 2mb with 12 mins . But when play that time got the actual time..

Me very puzzled now ..

Can u kindly explain wat is going on above ? Me wants to learn and know why ?

[Chewy]

This is my latest nero log with successful burn 100% gd with surface scan

http://forum.digital-digest.com/showthread.php?t=60834

[drfsupercenter]

DownloadError.htm
That's what happens when I do Save Target As.

Maybe you could dl and then upload for me? (http://rapidshare.de)

[droozy]

That means my drive no problem at all Chewy ?

Wat error is this tat u mentioned ?

" File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 1/13/2006 8:22:38 PM (Prassi/Veritas driver for win 2K) "

[Chewy]

usually a left over from easycd/roxio/sonic crud?

[drfsupercenter]

Wahh I want those firmware updates! Is there another place to get them (that works)?

[Chewy]

http://us.lgservice.com/index_b2c.jsp

6th down 105 don't pay any attention to the W98