Burning problems

[bigggt]

Hi i have been using nero forever but just got a new HP7170pc and am having all kinds of trouble burning

the dvd burner is an HP DVD Writer 640c with Es04 firmware

i just bought a pack of tayio Yuden printable dvd's(which are supposed to be top notch) and all iget is coasters

I see there is a new firmware out for this burner but i don't know where to begin on how to do the firware upgrade(did one a while ago on older PC) and it was a nightmare

anyway i checked and DMA is on,i also have dvdplus which came with the PC and imgburn installed ,this wouldn't be the problem would it.

please help

[LT. Columbo]

new firmware JS04

http://forum.rpc1.org/dl_firmware.php?download_id=2034

next time

http://forum.digital-digest.com/showthread.php?t=57993

[smkymntgrl]

I'm no expert but I installed new firmware for my burner no problem. I used decrypter (tools>drive>check for firmware updates) it took me to the Firmware page, found my firmware and then followed the directions. I flashed mine in safe mode (just because I was paranoid) and had no problems. I was worried about doing it but it was quite easy. I was having trouble burning newer media ex. 16x when I had been using 8x. The firmware update seemed to do the trick.

[bigggt]

thanks guys

[bigggt]

Any other suggestions becuase after the firware upgrade i still can't burn anything

[soup]

Please post the log from your burn or if you used Dvd Decrypter in file mode, please post that log.

[locoeng]

Have you taken a look at these?

[bigggt]

@ locoeng

thats where i have been reading for the past few hours trying to figure it out

i am not sure where the log begins so here it goes

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 7:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b

Recorder: <HP DVD Writer 640c> Version: JS04 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <IDE-DVD DROM6216 >Version: HD07 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HP DVD Writer 640c atapi Port 0 ID 0 DMA: On
CdRomPeripheral : IDE-DVD DROM6216 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3250823AS atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HP DVD Writer 640c E: CDRom0
IDE-DVD DROM6216 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046952kB)
Free physical memory: 560MB (574164kB)
Memory in use : 45
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.4.2006
UDF/ISO compilation
6:59:47 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

6:59:47 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

6:59:47 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

6:59:47 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

6:59:47 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

6:59:47 PM #6 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 640c running

6:59:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

6:59:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

6:59:47 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

6:59:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

6:59:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

6:59:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 640c, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

6:59:47 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:59:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 640c]
--------------------------------------------------------------

6:59:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 640c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

6:59:48 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

6:59:48 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

6:59:48 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

6:59:48 PM #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11,080 KB/s)

7:00:03 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:00:03 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

7:00:03 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

7:00:03 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

7:00:03 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:08:43 PM #25 Text 0 File WriterStatus.cpp, Line 116
<HP DVD Writer 640c > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

7:08:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:08:43 PM #27 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2286111

7:09:35 PM #28 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11,080 KB/s)

7:09:36 PM #29 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

7:09:36 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:09:36 PM #31 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

7:09:36 PM #32 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

7:09:36 PM #33 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

7:09:36 PM #34 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:24:08 PM #35 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x04430000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1C 0x75 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

7:24:08 PM #36 CDR -1135 File Writer.cpp, Line 311
Write error

7:24:08 PM #37 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:24:09 PM #38 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

7:24:09 PM #39 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1864991

7:24:09 PM #40 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26/01/2005 12:03:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 10/08/2004 8:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

i also tried with imgburn and it also fails

[locoeng]

Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

Burning a bit too close to the edge, reset your target size to 4300 in either Recode or DVD Shrink, whichever you happen to be using.

Simulation started at 8x (11,080 KB/s)

Back your burn speed down to 4X until you get a good burn and then you can start stepping up the speed if you want.

DVD high compatibility mode: Yes

Turn off high compatability mode with the DVD-R's and see if you can get a successful burn.

Nero Version: 6.6.0.16

Better late than never, sorry just noticed this...try version 6.6.0.18 here

Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

An upgrade to the new Nero may fix this error, it means that your drive isn't seeing your media correctly...there should be more numbers here other than zeroes.

[bigggt]

Hi

after trying all the above still couldn't get it to work so i reinstalled windows and know all seems good

can there be a conflict with burning programs, i don't know if i want to put nero back on

[LT. Columbo]

try imgburn.

[bigggt]

thanks i do use Imgburn for movies but was wondering about the other stuff(data) but i can try and use sonic MyDvd that came with the PC

[bigggt]

understanding Nero log

Hi i posted in another thread that i was having a lot of trouble and in my log i was told by locoeng that this part of the log should have more then 0,s

Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

anyway after trying so many different things i took the pc back and they replaced the drive and everything seems to be working now but the new log looks like this

Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

does this seem better,should there be more numbers instead of the 0's ,don't really know what it means

confused is all

thanks

[Gary D]

Have you updated your Nero?

Have you updated your firmware for your burner?

What type of discs are these?

[Miss Marple]

Looks as you are using -R or -RW discs?