Nero DVD burning error

[nik5330]

Hi
I have this error on my nec DVDRW (NEC DVD RW ND-3550A) , i just wanna say that i can burn CDs on it with no problem but i can't burn any DVDs on it. It gives me this error:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2

Recorder: <_NEC DVD_RW ND-3550A> Version: 1.05 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JLMS XJ-HD166S >Version: DQS5 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-60DGA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3550A D: CDRom0
JLMS XJ-HD166S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
BUFE : 0
Physical memory : 247MB (253420kB)
Free physical memory: 52MB (54220kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.4.2006
ISO compilation
11:56:06 #1 Text 0 File Isodoc.cpp, Line 6423
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:56:06 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 38912KB of Memory

11:56:06 #3 Text 0 File Reader.cpp, Line 124
Reader running

11:56:06 #4 Text 0 File Writer.cpp, Line 113
Writer D: _NEC DVD_RW ND-3550A running

11:56:06 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:56:07 #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media

11:56:07 #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2264703 (503:16.03, 4423MB)

11:56:07 #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

11:56:07 #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

11:56:07 #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:56:07 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2264704 (2264704) = #2264704/503:16.4
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264704 blocks [D: _NEC DVD_RW ND-3550A]
--------------------------------------------------------------

11:56:07 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: _NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4638113792, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2264704 | lead-out | 1 | 0x41 | 0x00

11:56:07 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:56:07 #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:56:07 #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

11:56:07 #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.

11:56:07 #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

11:56:07 #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)

11:56:07 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:56:07 #20 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode for Multisession

11:56:07 #21 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes

11:56:07 #22 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:56:35 #23 SPTI -1106 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x06f90000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

11:56:35 #24 CDR -1106 File Writer.cpp, Line 302
Power calibration error
D: _NEC DVD_RW ND-3550A

11:56:35 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:56:35 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:56:35 #27 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was -1

11:56:36 #28 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

11:56:36 #29 SPTI -1023 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C

11:56:36 #30 CDR -1023 File WriterStatus.cpp, Line 167
Command sequence error
D: _NEC DVD_RW ND-3550A

11:56:36 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

11:56:36 #32 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 18:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12:02:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Please help me

thanks in advance

[Chewy]

are you copying on the fly? What exactly were you doing with nero?
I didn't find any dvd files sorted in the log?

[nik5330]

I'm trying to burn some avi files (burn as data DVD)

[NightTran]

why can you use nero vision express and burn as dvd instead?

[nik5330]

thats not the problem, i can't burn any Data-DVD that i want.. and i wanna fix this problem

[vw56german]

Physical memory : 247MB (253420kB)
Free physical memory: 52MB (54220kB)
Memory in use : 78 %
I would recomend freeing up some resources, memory seems a bit low.

11:56:35 #23 SPTI -1106 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x06f90000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

11:56:35 #24 CDR -1106 File Writer.cpp, Line 302
Power calibration error
D: _NEC DVD_RW ND-3550A
The burner does not seem to like the media, you may want to check for firmware updates.

11:56:36 #30 CDR -1023 File WriterStatus.cpp, Line 167
Command sequence error
D: _NEC DVD_RW ND-3550A
This one I am not sure of, but I suspect other members will have an idea about it.

You may also want to slow the burn down a bit 8x might be a bit fast. Try at 2x and move up to 4x once you have success.

[Chewy]

http://www.bustrace.com/products/devfilter.htm

let's see what's trying to mess up the burn?

and where did you get that media and what name is it sold as?

[nik5330]

http://www.bustrace.com/products/devfilter.htm
let's see what's trying to mess up the burn?

and where did you get that media and what name is it sold as?

i wanna clear something up, i'm trying to burn avi files i downloaded (legally of course) to a DVD as Data DVD, i don't wanna use it to watch on a dvd rather i want to use it as backup.

Raesults of filter driver Load:

----------------------------------------------------
Filter Driver Load Order     http://www.bustrace.com
----------------------------------------------------

 Upper Device Filter:  redbook
       Device Object:  _NEC DVD_RW ND-3550A
  Lower Class Filter:  AFS2K
  Lower Class Filter:  PXHELP20
 Lower Device Filter:  imapi

         Driver Name:  redbook.sys
       File Location:  c:\windows\system32\drivers
    File Description:  Redbook Audio Filter Driver
        File Version:  5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
        Product Name:  Microsoft® Windows® Operating System
     Product Version:  5.1.2600.2180 [5.1.2600.2180]
        Company Name:  Microsoft Corporation

         Driver Name:  afs2k.sys
       File Location:  c:\windows\system32\drivers
    File Description:  Audio File System
        File Version:  3.1.21.1103 [3.1.21.0]
        Product Name:  AFS
     Product Version:  3.1.21.2(1103) [3.1.21.0]
        Company Name:  Oak Technology Inc.

         Driver Name:  pxhelp20.sys
       File Location:  c:\windows\system32\drivers
    File Description:  Px Engine Device Driver for Windows 2000/XP
        File Version:  2.02.62a [2.2.62.0]
        Product Name:  PxHelp20
     Product Version:   [2.0.0.0]
        Company Name:  Sonic Solutions

         Driver Name:  imapi.sys
       File Location:  c:\windows\system32\drivers
    File Description:  IMAPI Kernel Driver
        File Version:  5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
        Product Name:  Microsoft® Windows® Operating System
     Product Version:  5.1.2600.2180 [5.1.2600.2180]
        Company Name:  Microsoft Corporation

[Chewy]

and where did you get that media and what name is it sold as?

the blanks you are trying to burn????????

[nik5330]

o.k. i get it now, its TEAC and i've bought them from a reliable place (i think...)

[Chewy]

I think they are fakes(bogus)

http://www.videohelp.com/dvdmedia.php?selectmedia=3573#comments

TYG02's are made in japan only by TaiyoYuden

matter of fact they aren't even made(branded) by Teac.

google confirms