help !

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • trainspotter
    Junior Member
    Junior Member
    • Jun 2006
    • 2
    #1

    help !

    ok so i bought this ( dynex drive ) off ebay and it refuses to burn anything. not even cd's.. i have a sony vaio pcv-rx560, little old but reliable so far.. i had two drives, a pioneer dvd rom drive and a crappy sony crx175 cd-rw that wasnt burning either so i replaced it with this one. i set this new drive as master and the pioneer as slave. updated the firmware, uninstalled nero, ran the clean tool, rebooted a couple of times until it cleared all of the entries off.. reinstalled the 7082 so-said reliable version and it still doesnt burn anything. i downloaded the liveupdate tool nero actually runs the project and says burn was successful.. but theres nothing on the cd.. i checked on my friends laptop just to make sure but they were all empty. im not even trying with dvd burning because as soon as i put in a dvd it freezes up nero all together. given that i only have 256 mb's of ram.. i thought it would be a little slow to burn but not completely disastrous like this...

    please if anybody has any hints on anything i could be doing to fix this, i would greatly appreciate it.. or if maybe i should send it back to ebay and ask for a refund..

    here's my nero history log:
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.8.2
    Internal Version: 7, 0, 8, 2
    (Nero Express)
    Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 1 - 7.0.8.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    DVDRW IDE 16X E: CDRom0
    PIONEER DVD-ROM DVD-117R F: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    BUFE : 0
    Physical memory : 255MB (261664kB)
    Free physical memory: 125MB (128124kB)
    Memory in use : 51
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.6.2006
    CD-ROM (ISO)
    1:49:41 PM #1 Text 0 File Isodoc.cpp, Line 6423
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    1:49:42 PM #2 Text 0 File Burncd.cpp, Line 3056
    DVDRW IDE 16X
    Super Link activated

    1:49:42 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 39936KB of Memory

    1:49:42 PM #4 Text 0 File Reader.cpp, Line 124
    Reader running

    1:49:42 PM #5 Text 0 File Writer.cpp, Line 113
    Writer E: DVDRW IDE 16X running

    1:49:42 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    1:49:42 PM #7 Text 0 File Burncd.cpp, Line 3353
    Turn on Track-At-Once, using CD-R/RW media

    1:49:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 358079 ( 79:36.29)

    1:49:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO (enabled: CD)

    1:49:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: DVDRW IDE 16X

    1:49:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:49:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 358080 (358080) = #358080/79:34.30
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358078 blocks [E: DVDRW IDE 16X]
    --------------------------------------------------------------

    1:49:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: DVDRW IDE 16X] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733655040, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    358080 | lead-out | 1 | 0x41 | 0x00

    1:49:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
    Removed 2 run-out blocks from end of track 1. Length: 358080 -> 358078.

    1:49:42 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    1:49:42 PM #16 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    1:49:42 PM #17 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    1:49:42 PM #18 Text 0 File Burncd.cpp, Line 4187
    Cache writing successful.

    1:49:42 PM #19 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    1:49:42 PM #20 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 16x (2,400 KB/s)

    1:49:42 PM #21 SPTI -1189 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x02
    CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
    Buffer x04b79200: Len x4000

    1:49:42 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:49:42 PM #23 Text 0 File MMC.cpp, Line 21893
    Set BUFE: Super Link -> ON

    1:54:54 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:54:58 PM #25 Text 0 File MMC.cpp, Line 16661
    <DVDRW IDE 16X > start Close Session

    1:55:54 PM #26 Phase 37 File dlgbrnst.cpp, Line 1730
    Burn process completed successfully at 16x (2,400 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=3.00.15B, size=46080 bytes, created 2/13/2006 1:00:00 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======
    Ehab
    At Home
    Nero Serial Removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.8.2
    Internal Version: 7, 0, 8, 2

    Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 1 - 7.0.8.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    DVDRW IDE 16X E: CDRom0
    PIONEER DVD-ROM DVD-117R F: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    BUFE : 0
    Physical memory : 255MB (261664kB)
    Free physical memory: 105MB (108124kB)
    Memory in use : 58
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.6.2006
    CD-ROM (ISO)
    2:00:17 PM #1 Text 0 File Isodoc.cpp, Line 6423
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    2:00:17 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 39936KB of Memory

    2:00:17 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    2:00:17 PM #4 Text 0 File Writer.cpp, Line 113
    Writer E: DVDRW IDE 16X running

    2:00:17 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    2:00:17 PM #6 Text 0 File Burncd.cpp, Line 3353
    Turn on Track-At-Once, using CD-R/RW media

    2:00:17 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 358079 ( 79:36.29)

    2:00:17 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO (enabled: CD)

    2:00:17 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: DVDRW IDE 16X

    2:00:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:00:17 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 358080 (358080) = #358080/79:34.30
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358078 blocks [E: DVDRW IDE 16X]
    --------------------------------------------------------------

    2:00:17 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: DVDRW IDE 16X] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733655040, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    358080 | lead-out | 1 | 0x41 | 0x00

    2:00:17 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1127
    Removed 2 run-out blocks from end of track 1. Length: 358080 -> 358078.

    2:00:17 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    2:00:17 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    2:00:17 PM #16 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    2:00:17 PM #17 Text 0 File Burncd.cpp, Line 4187
    Cache writing successful.

    2:00:17 PM #18 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    2:00:17 PM #19 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 32x (4,800 KB/s)

    2:00:17 PM #20 SPTI -1189 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x02
    CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
    Buffer x051a1c00: Len x4000

    2:00:17 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:00:17 PM #22 Text 0 File MMC.cpp, Line 21893
    Set BUFE: Super Link -> OFF

    2:03:15 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:03:20 PM #24 Text 0 File MMC.cpp, Line 16661
    <DVDRW IDE 16X > start Close Session

    2:04:00 PM #25 Phase 37 File dlgbrnst.cpp, Line 1730
    Burn process completed successfully at 32x (4,800 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=3.00.15B, size=46080 bytes, created 2/13/2006 1:00:00 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======
    Last edited by trainspotter; 22 Jun 2006, 06:18 AM.
    Tags: None
    • trainspotter
      Junior Member
      Junior Member
      • Jun 2006
      • 2
      #2
      here's one more log of a failed burn, if it makes any difference:

      Windows XP 5.1
      IA32
      WinAspi: -
      ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

      NT-SPTI used
      Nero Version: 7.0.8.2
      Internal Version: 7, 0, 8, 2
      (Nero Express)
      Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 7.0.8.2
      Adapter driver: <IDE> HA 1
      Drive buffer : 2048kB
      Bus Type : default (0) -> ATAPI, detected: ?
      CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 1 - 7.0.8.2
      Adapter driver: <IDE> HA 1

      === Scsi-Device-Map ===
      DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
      DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
      CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
      CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 1 DMA: On

      === CDRom-Device-Map ===
      DVDRW IDE 16X E: CDRom0
      PIONEER DVD-ROM DVD-117R F: CDRom1
      =======================

      AutoRun : 0
      Excluded drive IDs:
      WriteBufferSize: 40894464 (0) Byte
      BUFE : 0
      Physical memory : 255MB (261664kB)
      Free physical memory: 39MB (40692kB)
      Memory in use : 84 %
      Uncached PFiles: 0x0
      Use Inquiry : 1
      Global Bus Type: default (0)
      Check supported media : Disabled (0)

      21.6.2006
      CD-ROM (ISO)
      12:58:03 PM #1 Text 0 File Isodoc.cpp, Line 6423
      Iso document burn settings
      ------------------------------------------
      Determine maximum speed : FALSE
      Simulate : FALSE
      Write : TRUE
      Finalize CD : TRUE
      Multisession : FALSE
      Burning mode : TAO
      Mode : 1
      ISO Level : 1 (Max. of 11 = 8 + 3 char)
      Character set : ISO 9660
      Joliet : TRUE
      Allow pathdepth more than 8 directories : TRUE
      Allow more than 255 characters in path : TRUE
      Write ISO9660 ;1 file extensions : TRUE

      12:58:03 PM #2 Text 0 File Burncd.cpp, Line 3056
      DVDRW IDE 16X
      Super Link activated

      12:58:03 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
      ReadBuffer-Pipe got 39936KB of Memory

      12:58:03 PM #4 Text 0 File Reader.cpp, Line 124
      Reader running

      12:58:03 PM #5 Text 0 File Writer.cpp, Line 113
      Writer E: DVDRW IDE 16X running

      12:58:03 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
      First writeable address = 0 (0x00000000)

      12:58:03 PM #7 Text 0 File Burncd.cpp, Line 3353
      Turn on Track-At-Once, using CD-R/RW media

      12:58:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
      Last possible write address on media: 359848 ( 79:59.73)
      Last address to be written: 358079 ( 79:36.29)

      12:58:03 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
      Write in overburning mode: NO (enabled: CD)

      12:58:03 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
      Recorder: DVDRW IDE 16X

      12:58:03 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
      >>> Protocol of DlgWaitCD activities: <<<
      =========================================

      12:58:03 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
      Setup items (after recorder preparation)
      0: TRM_DATA_MODE1 ()
      2 indices, index0 (150) not provided
      original disc pos #0 + 358080 (358080) = #358080/79:34.30
      relocatable, disc pos for caching/writing not required/ required, no patch infos
      -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358078 blocks [E: DVDRW IDE 16X]
      --------------------------------------------------------------

      12:58:03 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
      Prepare recorder [E: DVDRW IDE 16X] for write in TAO
      DAO infos:
      ==========
      MCN: ""
      TOCType: 0x00; Session Closed, disc fixated
      Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733655040, ISRC ""
      DAO layout:
      ===========
      __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
      -150 | lead-in | 0 | 0x41 | 0x00
      -150 | 1 | 0 | 0x41 | 0x00
      0 | 1 | 1 | 0x41 | 0x00
      358080 | lead-out | 1 | 0x41 | 0x00

      12:58:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
      Removed 2 run-out blocks from end of track 1. Length: 358080 -> 358078.

      12:58:03 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39
      SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

      12:58:03 PM #16 Text 0 File SCSIPassThrough.cpp, Line 84
      SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

      12:58:03 PM #17 Phase 24 File dlgbrnst.cpp, Line 1730
      Caching of files started

      12:58:03 PM #18 Text 0 File Burncd.cpp, Line 4187
      Cache writing successful.

      12:58:03 PM #19 Phase 25 File dlgbrnst.cpp, Line 1730
      Caching of files completed

      12:58:03 PM #20 Phase 36 File dlgbrnst.cpp, Line 1730
      Burn process started at 48x (7,200 KB/s)

      12:58:03 PM #21 SPTI -1189 File SCSIPassThrough.cpp, Line 290
      E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
      Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
      Sense Code: 0x30
      Sense Qual: 0x02
      CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
      Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
      Buffer x04b79200: Len x4000

      12:58:03 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707
      Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

      12:58:03 PM #23 Text 0 File MMC.cpp, Line 21893
      Set BUFE: Super Link -> ON

      12:58:43 PM #24 SPTI -1106 File SCSIPassThrough.cpp, Line 290
      E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
      Sense Key: 0x01 (KEY_RECOVERED_ERROR)
      Sense Code: 0x73
      Sense Qual: 0x03
      CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
      Sense Area: 0x71 00 01 00 00 00 00 0A 00 00 00 00 73 03
      Buffer x06690000: Len x10000
      0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

      12:58:43 PM #25 CDR -1106 File Writer.cpp, Line 302
      Power calibration error
      E: DVDRW IDE 16X

      12:58:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
      all writers idle, stopping conversion

      12:58:43 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
      conversion idle, stopping reader

      12:58:43 PM #28 CDR -201 File WriterStatus.cpp, Line 200
      Invalid write state
      E: DVDRW IDE 16X

      12:58:43 PM #29 TRANSFER -18 File WriterStatus.cpp, Line 200
      Could not perform EndTrack

      12:58:43 PM #30 Text 0 File MMC.cpp, Line 16661
      <DVDRW IDE 16X > start Close Session

      12:58:43 PM #31 Phase 38 File dlgbrnst.cpp, Line 1730
      Burn process failed at 48x (7,200 KB/s)


      Existing drivers:
      File 'Drivers\PXHELP20.SYS': Ver=3.00.15B, size=46080 bytes, created 2/13/2006 1:00:00 PM (Prassi/Veritas driver for win 2K)

      Registry Keys:
      HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

        Comment

        • codajohn
          Digital Video Expert
          Digital Video Expert
          • Jul 2005
          • 661
          #3
          Memory usage seems a bit high.
          Memory in use : 84 %
          Do you have anything heavy running in the background.
          CJ
          My DVD Collection
          Register To Join Digital Video Forums


          Dell Inspiron 9100 Laptop, Windows XP Home SP 2 (build 2600), 2.80GH Pent 4, ST94811A 40GB HD, 2GB RAM, NEC DVD+RW ND-6100A 104D, ATI MOBILITY RADEON 9700, External 250GB Maxtor HD, External LG-5163D A105

          IBM ThinkCenter 8189, XP Pro, 3.2GH Pentium 4, 120 GB HD, 1GB Ram, BENQ DW1650 BCIC, Nvidia GeForce FX 5200, Generic floppy disk drive (3.5")

          The Golden Rules of Burning

            Comment

            • photo_angel2004
              Queen of Digital Video
              Queen of Digital Video
              • Jan 2004
              • 3558
              #4
              You may want to slow down on the burning speed see the golden rules of burning in my sig.

              memory is a bit low I would go with no less then 512MG I run 1.5 GIG


              You may want to try IMGBurn to burn with, you have better control over burn speeds.

              ImgBurn - A User Guide - Digital Video Forums
              http://forum.digital-digest.com/showthread.php?t=55424
              Talk about ImgBurn






              IMGburn ** ** Nero 6.6.0.18 **Intelli Type Pro 6.1 **

                Comment

                • Chewy
                  Super Moderator
                  • Nov 2003
                  • 18971
                  #5
                  burn cd-r's at 16x, use good media

                    Comment

                    Previous template Next
                    Working...