Burnt out burning

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jimsabeach
    Junior Member
    Junior Member
    • Aug 2006
    • 3

    Burnt out burning

    Since downloading ri4m version 1.4.10.0, I have been unable to have a complete burn process. Numerous errors come up in dvdshrink which stop the process but the one I get mostly is while the burning process is attempted using Nero API version: 6.3.1.17. I have tried using various format discs - +RW, -R (4x), -R (16x) but it doesnt seem to matter which type disc I use I almost always pretty much get the same log results which are set forth below. I am using a I/O Magic 16x external dual-layer +/- R/RW burner model no. IOM-601. I had no problems until I downloaded ri4me version 1.4.10.0. Is it me, is it undetected disc copy protections, or is it RI4me?


    P.S.: !!! Congratulations furiousg!!! boy or girl?

    __________________________________

    Nero Serial Removed

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/4/2005 9:06:10 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero API version: 6.3.1.17
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <DVDRW IDE 16X> Version: A07F - HA 2 TA 0 - 6.3.1.17
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder

    === Scsi-Device-Map ===
    DiskPeripheral : HITACHI_DK23FA-60
    <wbr> atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD+RW GCA-4040 D: CDRom0
    DVDRW IDE 16X E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523248kB)
    Free physical memory: 121MB (124360kB)
    Memory in use : 76 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    20.8.2006
    NeroAPI
    12:13:52 PM #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    12:13:52 PM #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    12:13:52 PM #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    12:13:52 PM #4 Text 0 File Reader.cpp, Line 118
    Reader running

    12:13:52 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:13:52 PM #6 Text 0 File Writer.cpp, Line 124
    Writer DVDRW IDE 16X running

    12:13:53 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:13:53 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:13:53 PM #9 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-At-Once, using DVD media

    12:13:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2221903 (493:45.28, 4339MB)

    12:13:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    12:13:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: DVDRW IDE 16X, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    12:13:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =============================
    <wbr>============

    12:13:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2221904 (2221904) = #2221904/493:45.29
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2221904 blocks [DVDRW IDE 16X ]
    -----------------------------
    <wbr>------------------------------<wbr>---

    12:13:53 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4550459392, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|
    <wbr>_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2221904 | lead-out | 1 | 0x00 | 0x41

    12:13:53 PM #16 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    12:13:53 PM #17 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    12:13:53 PM #18 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    12:13:53 PM #19 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 4x (5,540 KB/s)

    12:13:54 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:13:54 PM #21 Text 0 File DVDR.cpp, Line 1876
    Recording mode: Sequential Recording Mode

    12:13:54 PM #22 Text 0 File Mmc.cpp, Line 20394
    Set BUFE: Super Link -> ON

    12:13:54 PM #23 Text 0 File DVDR.cpp, Line 2017
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:13:54 PM #24 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:14:06 PM #25 Text 0 File Cdrdrv.cpp, Line 1294
    12:14:06.468 - DVDRW IDE 16X\H2 T0 : Queue again later

    12:20:17 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00CA0000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE
    <wbr>_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x0F 0x1A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    12:20:17 PM #27 CDR -500 File Writer.cpp, Line 304
    SCSI command aborted
    DVDRW IDE 16X\H2 T0

    12:20:17 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    12:20:17 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    12:20:17 PM #30 Text 0 File DVDR.cpp, Line 2253
    EndDAO: Last written address was 989887

    12:20:17 PM #31 CDR -1114 File WriterStatus.cpp, Line 164
    Reset occurred

    12:20:17 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164
    Could not perform end of Disc-at-once

    12:20:17 PM #33 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 4x (5,540 KB/s)

    12:20:17 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    12:20:17 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/4/2005 9:06:10 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 1:12:48 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 2, 15, 0, size=92672 bytes, created 7/7/2004 1:47:20 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 2, 15, 0, size=28672 bytes, created 7/7/2004 1:48:00 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 2, 15, 0, size=7680 bytes, created 7/7/2004 1:50:18 PM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
    <wbr>\AllocateCDROMs : 0 (Security Option)
  • Dialysis1
    Digital Video Specialist
    Digital Video Specialist
    • Apr 2006
    • 910

    #2
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    I don't know much about Nero but this doesn't look right.

    This is a Nero problem, not DVD Shrink.
    Last edited by Dialysis1; 21 Aug 2006, 05:53 AM.
    DVDSubEdit
    ImgBurn


    Comment

    • Jack Lurker
      Oh Bugger! It's bust again!
      • Jun 2005
      • 376

      #3
      CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: Off
      If thats the drive you are burning with then you need to enable DMA, check the link in my sig.


      File 'Drivers\InCDfs.SYS': Ver=4, 2, 15, 0, size=92672 bytes, created 7/7/2004 1:47:20 PM (InCD4 driver for win NT/2K/XP)
      File 'Drivers\InCDpass.SYS': Ver=4, 2, 15, 0, size=28672 bytes, created 7/7/2004 1:48:00 PM (InCD4 driver for win NT/2K/XP)
      File 'Drivers\InCDrec.SYS': Ver=4, 2, 15, 0, size=7680 bytes, created 7/7/2004 1:50:18 PM (InCD4 driver for win NT/2K/XP)
      Get rid of InCd by using this Nero Clean Tool.http://ww2.nero.com/nero6/eng/Clean_Tools.html as it can cause problems.
      Jack


      The best thing for trees is a bloody big axe! Works for stupidity too!!
      You have a problem? Search the forums, you 'aint the first person to have your problem thats for sure!!
      There's a bloke called Blutach here somewhere, check out his signature. Loads of useful info in it!

      .

      Comment

      • Gary D
        Lord of Digital Video
        Lord of Digital Video
        • Dec 2005
        • 2266

        #4
        Disc Manufacturer: CMC MA - G. AM3
        Get better media. This is poo-poo! Use Verbs or TY. See the quality list in my signature.

        === Scsi-Device-Map ===
        DiskPeripheral : HITACHI_DK23FA-60 atapi Port 0 ID 0 DMA: On
        CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: Off

        === CDRom-Device-Map ===
        HL-DT-ST DVD+RW GCA-4040 D: CDRom0
        DVDRW IDE 16X E: CDRom1
        =======================
        This does not seem right as no DMA is listed for your burner. Is your burner USB/firewire connected???? Or is the DMA off???
        Gary D

        Comment

        • Chewy
          Super Moderator
          • Nov 2003
          • 18971

          #5
          dialysis use the report button

          thread moved to blank media and burning

          Comment

          • daman
            Yummy!!!
            • Apr 2006
            • 684

            #6
            Originally Posted by Jimsabeach
            Memory in use : 76 %
            May want to free some up,,getting tight
            She's going down to the devil, down down to 90 degrees.

            Rock on bro!!!!
            _________________________________________________
            Down load DVDFab Decrypter:Here
            Down load shrink 3.2.0.15: Here
            DVD Decrypter 3.5.4.0: Here
            Down load VoBblanker: Here
            Down load ImgBurn: Here
            Down load RipIt4Me: Here
            RipIt4Me guide: Here

            Comment

            • healimonster
              Junior Member
              Junior Member
              • May 2007
              • 2

              #7
              Originally Posted by Jack Lurker
              If thats the drive you are burning with then you need to enable DMA, check the link in my sig.
              I don't see the link anymore... could you post it please because I have the very same drive and problem.

              Comment

              • Chewy
                Super Moderator
                • Nov 2003
                • 18971

                #8
                Originally Posted by healimonster
                I don't see the link anymore... could you post it please because I have the very same drive and problem.
                would you post a burn log, see the sticky at the top of the forum

                Comment

                Working...