Tweet
Error Log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 2002. 04. 06. 11:53:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004. 07. 22. 17:33:44
Nero version: 6.3.1.20 (Nero Express)
Recorder: <DVD DUAL GO-W0404A> Version: 0051 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVD DUAL GO-W0404A >Version: 0051 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVD DUAL GO-W0404A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVD DUAL GO-W0404A E: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 258MB (264580kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.9.2006
===== Disc-Copy over image - 1st step : Copy to image ...
2:30:18 #1 Text 0 File Reader.cpp, Line 126
Reader running
2:30:18 #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running
2:30:18 #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2006464 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
2:30:18 #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2006464 = 2006464, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
2:30:18 #5 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media
2:30:18 #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2006463 (445:52.63, 3918MB)
2:30:18 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
2:30:18 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
2:30:18 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:30:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2006464 (2006464) = #2006464/445:52.64
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2006464 blocks [ Image Recorder ]
--------------------------------------------------------------
2:30:18 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4109545472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2006464 | lead-out | 1 | 0x00 | 0x41
2:30:18 #12 Phase 120 File dlgbrnst.cpp, Line 1855
Creating the image for burning
2:30:18 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:47:08 #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2006464 (1E9DC0h), lenght 0 blocks
2:47:08 #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:47:08 #16 Phase 121 File dlgbrnst.cpp, Line 1855
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
2:47:26 #1 Text 0 File Reader.cpp, Line 126
Reader running
2:47:26 #2 Text 0 File Writer.cpp, Line 124
Writer DVD DUAL GO-W0404A running
2:47:26 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -185421824
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=445:52.64 ( 2006464)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Ãron\My Documents\Biofotonscanner.nrg>
2:47:27 #4 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media
2:47:58 #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2006463 (445:52.63, 3918MB)
2:47:58 #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
2:47:59 #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVD DUAL GO-W0404A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
2:47:59 #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW.)
2:47:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2006464 (2006464) = #2006464/445:52.64
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2006464 blocks [DVD DUAL GO-W0404A ]
--------------------------------------------------------------
2:47:59 #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVD DUAL GO-W0404A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4109238272, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2006464 | lead-out | 1 | 0x00 | 0x41
2:48:01 #11 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 4x (5 540 KB/s)
2:48:02 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:48:02 #13 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 12:29,317 (749317ms) -> OK
2:48:03 #14 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode
2:48:03 #15 Text 0 File Mmc.cpp, Line 20531
Set BUFE: JustLink -> ON
2:48:03 #16 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes
2:48:03 #17 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:48:25 #18 SCSI -1106 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03080000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
2:48:25 #19 CDR -1106 File Writer.cpp, Line 304
Power calibration error
2:48:25 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:48:25 #21 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
2:48:26 #22 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was -1
2:48:26 #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
2:48:26 #24 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
2:48:26 #25 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 4x (5 540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2005. 12. 05. 7:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 2004. 09. 18. 17:08:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 2002. 04. 06. 11:53:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004. 07. 22. 17:33:44
Nero version: 6.3.1.20 (Nero Express)
Recorder: <DVD DUAL GO-W0404A> Version: 0051 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVD DUAL GO-W0404A >Version: 0051 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVD DUAL GO-W0404A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVD DUAL GO-W0404A E: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 258MB (264580kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.9.2006
===== Disc-Copy over image - 1st step : Copy to image ...
2:30:18 #1 Text 0 File Reader.cpp, Line 126
Reader running
2:30:18 #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running
2:30:18 #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2006464 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
2:30:18 #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2006464 = 2006464, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
2:30:18 #5 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media
2:30:18 #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2006463 (445:52.63, 3918MB)
2:30:18 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
2:30:18 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
2:30:18 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:30:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2006464 (2006464) = #2006464/445:52.64
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2006464 blocks [ Image Recorder ]
--------------------------------------------------------------
2:30:18 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4109545472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2006464 | lead-out | 1 | 0x00 | 0x41
2:30:18 #12 Phase 120 File dlgbrnst.cpp, Line 1855
Creating the image for burning
2:30:18 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:47:08 #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2006464 (1E9DC0h), lenght 0 blocks
2:47:08 #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:47:08 #16 Phase 121 File dlgbrnst.cpp, Line 1855
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
2:47:26 #1 Text 0 File Reader.cpp, Line 126
Reader running
2:47:26 #2 Text 0 File Writer.cpp, Line 124
Writer DVD DUAL GO-W0404A running
2:47:26 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -185421824
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=445:52.64 ( 2006464)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Ãron\My Documents\Biofotonscanner.nrg>
2:47:27 #4 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media
2:47:58 #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2006463 (445:52.63, 3918MB)
2:47:58 #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
2:47:59 #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVD DUAL GO-W0404A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
2:47:59 #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW.)
2:47:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2006464 (2006464) = #2006464/445:52.64
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2006464 blocks [DVD DUAL GO-W0404A ]
--------------------------------------------------------------
2:47:59 #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVD DUAL GO-W0404A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4109238272, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2006464 | lead-out | 1 | 0x00 | 0x41
2:48:01 #11 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 4x (5 540 KB/s)
2:48:02 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:48:02 #13 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 12:29,317 (749317ms) -> OK
2:48:03 #14 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode
2:48:03 #15 Text 0 File Mmc.cpp, Line 20531
Set BUFE: JustLink -> ON
2:48:03 #16 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes
2:48:03 #17 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:48:25 #18 SCSI -1106 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03080000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
2:48:25 #19 CDR -1106 File Writer.cpp, Line 304
Power calibration error
2:48:25 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:48:25 #21 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
2:48:26 #22 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was -1
2:48:26 #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
2:48:26 #24 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
2:48:26 #25 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 4x (5 540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2005. 12. 05. 7:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 2004. 09. 18. 17:08:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Comment