Help

[Moonhawk]

I didnt know where else to post this but I have been at this for over 48 hours and yet to find a solution, I am trying to use my dvd shrink 3.1 with my nero it was working just fine for a while and then it started giving me this error log
Nero Serial Removed*
Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 5:54:31 AM
NT-SPTI used
Nero API version: 6.6.1.6
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 1, 6d
Recorder: <Memorex DVD+-RAM 510L v1>Version: MWS7 - HA 1 TA 1 - 6.6.1.6
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC25N060ATMR04-0 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4243N D: CDRom0
Memorex DVD+-RAM 510L v1 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523624kB)
Free physical memory: 391MB (400612kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.11.2006
NeroAPI
10:06:18 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted

10:06:21 PM #2 NEROAPI 7 File Burncd.cpp, Line 3095
Error:\nCannot connect TRF.

10:06:21 PM #3 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

10:06:21 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.129 , size=24698 bytes, created 10/16/2003 8:15:18 PM
File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 1:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 0, size=102016 bytes, created 1/17/2006 11:09:34 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 0, size=29440 bytes, created 1/17/2006 11:09:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 0, size=8704 bytes, created 1/16/2006 6:41:20 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


then I try after it is already encoded I try to brun it directly from nero to a clean dvd-r and it gives me this error

Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 5:54:31 AM
NT-SPTI used
Nero Version: 6.6.1.6
Internal Version: 6, 6, 1, 6d
(Nero Express)
Recorder: <Memorex DVD+-RAM 510L v1>Version: MWS7 - HA 1 TA 1 - 6.6.1.6
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST RW/DVD GCC-4243N>Version: A102 - HA 1 TA 0 - 6.6.1.6
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC25N060ATMR04-0 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4243N D: CDRom0
Memorex DVD+-RAM 510L v1 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523624kB)
Free physical memory: 28MB (28788kB)
Memory in use : 94 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.11.2006
UDF/ISO compilation
10:34:46 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

10:34:46 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

10:34:46 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

10:34:46 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

10:34:46 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

10:34:46 PM #6 Text 0 File Reader.cpp, Line 124
Reader running

10:34:46 PM #7 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD+-RAM 510L v1 running

10:34:46 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:34:46 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:34:46 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

10:34:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

10:34:46 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

10:34:46 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: Memorex DVD+-RAM 510L v1, Media type: DVD-R
Disc Manufacturer: MJC M0 - 05
Disc Application Code: 64, Disc Physical Code: 193

10:34:46 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:34:46 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [Memorex DVD+-RAM 510L v1]
--------------------------------------------------------------

10:34:46 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Memorex DVD+-RAM 510L v1] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00

10:34:46 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:34:46 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:34:46 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

10:34:46 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

10:34:46 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

10:34:46 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)

10:34:46 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:34:46 PM #24 Text 0 File DVDR.cpp, Line 2730
Recording mode: Sequential Recording Mode

10:34:46 PM #25 Text 0 File DVDR.cpp, Line 2886
Start write address at LBA 0
DVD high compatibility mode: Yes

10:34:46 PM #26 Text 0 File Cdrdrv.cpp, Line 8648
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:36:20 PM #27 Text 0 File Cdrdrv.cpp, Line 1200
22:36:20.734 - E: Memorex DVD+-RAM 510L v1 : Queue again later

10:38:18 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 01 C0 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x070a0000: Len x10000
0x00 00 01 BA 44 00 05 32 4C 7D 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 7F 70 06 1E DE F7 71 D1 FF
0x5E 00 C7 2F C7 77 1D 76 37 AC 00 54 00 42 08 01

10:38:18 PM #29 CDR -1046 File Writer.cpp, Line 311
Illegal disc
E: Memorex DVD+-RAM 510L v1

10:38:19 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:38:20 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:38:21 PM #32 Text 0 File DVDR.cpp, Line 3126
EndDAO: Last written address was 447

10:38:21 PM #33 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.129 , size=24698 bytes, created 10/16/2003 8:15:18 PM
File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 1:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

please help I have uninstalled nero and dvd shrink twice I swapped the burner also I have used different brand media and yet nothing..what do I do?

[Chewy]

brand new burner, new firmware, but off the wall blanks(unknown)

http://www.videohelp.com/dvdmedia.php?dvdmediadvdridsearch=MJC%20M005....%20

one comment

have you tried any verbatim disks?

[Moonhawk]

No I havent but its not the disks I have tried 3 different brands

[Gary D]

I noticed you have InCD installed. Even though this is supplied by Nero, it conflicts when burning. Remove it from your system. See my signature about InCD and Nero. And remove the Roxio with roxy zap.

It is weird that different drivers show up in 2 different burns.

EDIT: BTW Chewy, did you noticed 6.6.1.6 for the version #?
6.6.1.4 is still at Nero 6 updates only

[Moonhawk]

Ok will try that but now when I just reinstalled nero it is only giving me option to burn cd's and not dvds....this is driving me crazy...

[Gary D]

Here is a guide on how to burn DVDs manually by JMET...=> LINK

It is a great guide but follow it exactly. I have been burning manually for months now and I love it as I set burn speed, # of copies, do double burns, etc., while using it.

[Moonhawk]

I know how to do it maunally I tried that it doesnt work but now I cant even do that because it only shows option to record vcd and svcd

[Chewy]

http://ftp.tpnet.pl/vol/d2/ftp.nero.com/oem/FSC/

oem version

does nero even see the memorex external?

[Moonhawk]

I just finished burning directly now I restarting dvd shrink one more time to see if it works thanks for the help