burner is possessed

[Dani215]

hi everyone. i have been burning ok until recently. all of a sudden burner keeps going crazy. i fix the problem, then a couple days later same thing happens. this time i burned one movie completely fine, then went to do next one and poof...tried burning in both nero and imgburn (logs below). this happens regardless of movie, even ones i have previously burned successfully. please please help.
IMGBURN log
I 10:40:01 ImgBurn Version 2.1.0.0 started!
I 10:40:01 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 10:40:01 Initialising SPTI...
I 10:40:01 Searching for SCSI / ATAPI devices...
I 10:40:08 Found 1 CD-RW and 1 DVD±RW/RAM!
I 10:40:37 Operation Started!
I 10:40:37 Source File: F:\YOU_ME_AND_DUPREE.ISO
I 10:40:37 Source File Sectors: 2,285,880 (MODE1/2048)
I 10:40:37 Source File Size: 4,681,482,240 bytes
I 10:40:37 Source File Volume Identifier: YOU_ME_AND_DUPREE
I 10:40:37 Source File Implementation Identifier: DVD Shrink
I 10:40:37 Source File File System(s): ISO9660, UDF (1.02)
I 10:40:37 Destination Device: [1:1:0] HL-DT-ST DVDRRW GSA-4166B 1.02 (E (ATA)
I 10:40:37 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 4x, 8x, 12x, 16x)
I 10:40:37 Destination Media Sectors: 2,295,104
I 10:40:37 Write Mode: DVD
I 10:40:37 Write Type: DAO
I 10:40:37 Write Speed: 4x
I 10:40:37 Link Size: Auto
I 10:40:37 Test Mode: No
I 10:40:37 BURN-Proof: Enabled
I 10:40:37 Filling Buffer...
I 10:40:38 Writing LeadIn...
W 10:41:07 Failed to Write Sectors 0 - 31 - Unknown (Write Error) (0x0C, 0x80)
W 10:41:07 Retrying (1 of 20)...
W 10:41:07 Retry Failed - No Seek Complete
W 10:41:07 Retrying (2 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (3 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (4 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (5 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (6 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (7 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (8 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (9 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (10 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (11 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (12 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (13 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (14 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (15 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (16 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (17 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (18 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (19 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
W 10:41:07 Retrying (20 of 20)...
W 10:41:07 Retry Failed - Invalid Address For Write
E 10:41:10 Failed to Write Sectors 0 - 31 - Unknown (Write Error) (0x0C, 0x80)
I 10:41:10 Synchronising Cache...
I 10:41:11 Closing Track...
I 10:41:12 Finalising Disc...
E 10:41:13 Failed to Write Image!
E 10:41:13 Operation Failed! - Duration: 00:00:35
I 10:41:13 Average Write Rate: N/A - Maximum Write Rate: N/A

Nero log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:03:20 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 1 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <CyberDrv CW038D CD-R/RW >Version: 100C - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-22HEA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : CyberDrv CW038D CD-R/RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRRW GSA-4166B atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
CyberDrv CW038D CD-R/RW D: CDRom0
HL-DT-ST DVDRRW GSA-4166 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1247MB (1277428kB)
Free physical memory: 626MB (641232kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.1.2007
Burn DVD Image
10:34:43 AM #1 Text 0 File Reader.cpp, Line 118
Reader running

10:34:43 AM #2 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRRW GSA-4166B running

10:34:43 AM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media

10:34:43 AM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286029 (508:00.29, 4464MB)

10:34:43 AM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

10:34:43 AM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRRW GSA-4166B, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

10:34:43 AM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:34:43 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286030 (2286030) = #2286030/508:0.30
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286030 blocks [HL-DT-ST DVDRRW GSA-4166B]
--------------------------------------------------------------

10:34:43 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVDRRW GSA-4166B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681789440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286030 | lead-out | 1 | 0x00 | 0x41

10:34:43 AM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

10:34:43 AM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

10:34:43 AM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

10:34:43 AM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)

10:34:43 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:34:43 AM #15 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY....
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

10:34:43 AM #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:38,159 (218159ms) -> OK

10:34:43 AM #17 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes

10:35:24 AM #18 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03140000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80

10:35:24 AM #19 CDR -1135 File Writer.cpp, Line 304
Write error

10:35:24 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:35:24 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:35:24 AM #22 Phase 127 File dlgbrnst.cpp, Line 1845
Generating DVD high compatibility borders

10:35:24 AM #23 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

10:35:24 AM #24 Phase 129 File dlgbrnst.cpp, Line 1845
Generating DVD borders completed successfully

10:35:24 AM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

10:35:24 AM #26 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 16x (22,160 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/12/2004 8:55:51 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

[Dan]

Looks like your DMA is off.

[Dani215]

fixed dma for like third time, still same problem. here is new log

I 13:51:05 DVD Decrypter Version 3.5.4.0 started!
I 13:51:05 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 13:51:05 Initialising SPTI...
I 13:51:05 Searching for SCSI / ATAPI devices...
I 13:51:05 Found 1 CD-RW and 1 DVD-RAM/±RW!
I 13:51:21 Operation Started!
I 13:51:21 Source File: F:\YOU_ME_AND_DUPREE.ISO
I 13:51:21 Source File Sectors: 2,285,880 (MODE1/2048)
I 13:51:21 Source File Size: 4,681,482,240 bytes
I 13:51:21 Source File Implementation Identifier: DVD Shrink
I 13:51:21 Destination Device: [1:1:0] HL-DT-ST DVDRRW GSA-4166B 1.02 (E (ATA)
I 13:51:21 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 4x, 8x, 12x, 16x)
I 13:51:21 Destination Media Sectors: 2,295,104
I 13:51:21 Write Mode: DVD
I 13:51:21 Write Type: SAO
I 13:51:21 Write Speed: 4x
I 13:51:21 Link Size: Auto
I 13:51:21 Test Mode: No
I 13:51:21 BURN-Proof: Enabled
I 13:51:21 Filling Buffer...
I 13:51:22 Writing LeadIn...
W 13:51:36 Failed to Write Sectors 0 - 31 - Unknown (Write Error) (0x0C, 0x80)
W 13:51:36 Retrying (1 of 20)...
W 13:51:36 Retry Failed - No Seek Complete
W 13:51:36 Retrying (2 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (3 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (4 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (5 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (6 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (7 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (8 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (9 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (10 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (11 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (12 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (13 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (14 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (15 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (16 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (17 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (18 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (19 of 20)...
W 13:51:36 Retry Failed - Invalid Address For Write
W 13:51:36 Retrying (20 of 20)...
W 13:51:36 Retry Failed! - Invalid Address For Write
E 13:51:48 Failed to Write Sectors 0 - 31 - Unknown (Write Error) (0x0C, 0x80)
I 13:51:48 Synchronising Cache...
I 13:51:48 Closing Track...
I 13:51:48 Finalising Disc...
E 13:51:48 Failed to Write Image!
E 13:51:48 Operation Failed! - Duration: 00:00:27
I 13:51:48 Average Write Rate: N/A - Maximum Write Rate: N/A

[Chewy]

many times a dvd burner does not like to be slaved to an inferior older drive, that cyberdrive is very old

try removing the power and cable from it, change the jumper to master on the LG burner and put it on the end of the cable

you are using a new cable with the new dvd burner?

[Dani215]

switched everything this morning. still no good. drive reads and rips ok, but still will not burn. can drive possible be bad?

[benbryant]

Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80

Look like your burner doesn't like the media. Please try better media such as Verbatim or Taiyo Yuden

Regards

[Chewy]

I would still suspect the cable or filter drivers if that's ok

[Dani215]

ordered a new burner to see if that helps because this is making me crazy

[doctorhardware]

Computers and electronics gotta love it.