Tweet
Can't burn on DL DVD
Hi everyone,
I need help on burning Double Layer DVD's. Here is my Nero 8 log. DMA is enabled on my device.
Sylvain
1K22-0867-0795-66M4-5030-5899-****
8K24-4225-1105-EKK5-5000-0021-****
Windows XP 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
: WDC WD2500KS-00MJB0 02.0 viamraid Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B F: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095808kB)
Free physical memory: 1301MB (1332716kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.2.2008
Burn DVD Image
17:02:49 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:02:49 #2 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media
17:02:49 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3317695 (737:15.70, 6479MB)
17:02:49 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)
17:02:49 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R DL
Disc Manufacturer ID: <RITEK>, Media Type ID: <S04>, Product revision number: 66
Disc Application Code: 0, Extended Information Indicators: 3
17:02:49 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:02:49 #7 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 3317696 (3317696) = #3317696/737:15.71
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3317696 blocks [F: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
17:02:49 #8 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [F: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6794641408, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3317696 | 3317696 | 0x00
3317696 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
17:02:49 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
17:02:49 #10 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
17:02:49 #11 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
17:02:49 #12 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
17:02:49 #13 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
17:02:49 #14 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 2.4x (3 324 KB/s)
17:02:50 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
17:02:50 #16 Text 0 File DVDPlusDualLayer.cpp, Line 495
Disc finalized, LBA total Image size: 3317696 (6479MB), Last LBA L0: 1658847 (3239MB)
17:02:54 #17 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 35 2D 00 0E 0C
Buffer x04e5cc00: Len xc
0x00 0A 00 00 00 00 00 00 00 19 4F E0
17:02:54 #18 Text 0 File DVDPlusDualLayer.cpp, Line 671
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
17:02:54 #19 CDR -1135 File ThreadedTransferInterface.cpp, Line 1742
Write error
F: HL-DT-ST DVDRAM GSA-4163B
17:02:54 #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1742
Could not perform start of Disc-at-once
17:02:54 #21 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
17:02:54 #22 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 2.4x (3 324 KB/s)
17:02:54 #23 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:02:58 #24 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed
17:02:58 #25 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
Thanks!
I need help on burning Double Layer DVD's. Here is my Nero 8 log. DMA is enabled on my device.
Sylvain
1K22-0867-0795-66M4-5030-5899-****
8K24-4225-1105-EKK5-5000-0021-****
Windows XP 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
: WDC WD2500KS-00MJB0 02.0 viamraid Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B F: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095808kB)
Free physical memory: 1301MB (1332716kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.2.2008
Burn DVD Image
17:02:49 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:02:49 #2 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media
17:02:49 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3317695 (737:15.70, 6479MB)
17:02:49 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)
17:02:49 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R DL
Disc Manufacturer ID: <RITEK>, Media Type ID: <S04>, Product revision number: 66
Disc Application Code: 0, Extended Information Indicators: 3
17:02:49 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:02:49 #7 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 3317696 (3317696) = #3317696/737:15.71
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3317696 blocks [F: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
17:02:49 #8 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [F: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6794641408, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3317696 | 3317696 | 0x00
3317696 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
17:02:49 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
17:02:49 #10 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
17:02:49 #11 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
17:02:49 #12 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
17:02:49 #13 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
17:02:49 #14 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 2.4x (3 324 KB/s)
17:02:50 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
17:02:50 #16 Text 0 File DVDPlusDualLayer.cpp, Line 495
Disc finalized, LBA total Image size: 3317696 (6479MB), Last LBA L0: 1658847 (3239MB)
17:02:54 #17 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 35 2D 00 0E 0C
Buffer x04e5cc00: Len xc
0x00 0A 00 00 00 00 00 00 00 19 4F E0
17:02:54 #18 Text 0 File DVDPlusDualLayer.cpp, Line 671
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
17:02:54 #19 CDR -1135 File ThreadedTransferInterface.cpp, Line 1742
Write error
F: HL-DT-ST DVDRAM GSA-4163B
17:02:54 #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1742
Could not perform start of Disc-at-once
17:02:54 #21 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
17:02:54 #22 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 2.4x (3 324 KB/s)
17:02:54 #23 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:02:58 #24 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed
17:02:58 #25 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
Thanks!
Comment