Tweet
Nero burning error - Help!
Hi everyone
I've been using Nero 7.10.1 for a few months and never had a problem up until last night.
I use Nero to burn DVD's.
I tried uninstalling and re installing the software but it still didn't work.
When I put in a blank DVD disc it lets me add files do everything normal up until the burning process.
It stays on 1% for about 5 minutes (?) then comes up with an error message.
I run Vista if that helps.
I've done an error log below. I don't understand a bit of it.
I've pasted it below
Windows XP 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder: <TSSTcorp DVD+-RW TS-L632H>Version: D400 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp DVD+-RW TS-L632H>Version: D400 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
TSSTcorp DVD+-RW TS-L632H E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1013MB (1037628kB)
Free physical memory: 322MB (329960kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.6.2009
UDF/ISO compilation
5:15:30 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:15:31 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started
5:15:31 PM #3 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)
5:15:31 PM #4 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:15:31 PM #5 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted
5:15:31 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
5:15:31 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
5:15:31 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
5:15:32 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2101951 (467:06.01, 4105MB)
5:15:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
5:15:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp DVD+-RW TS-L632H, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
5:15:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:15:32 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2101952 (2101952) = #2101952/467:6.2
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2101952 blocks [E: TSSTcorp DVD+-RW TS-L632H]
--------------------------------------------------------------
5:15:32 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp DVD+-RW TS-L632H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4304797696, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2101952 | 0 | 0x00
2101952 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
5:15:32 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
5:15:32 PM #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
5:15:32 PM #17 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
5:15:32 PM #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
5:15:32 PM #19 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
5:15:32 PM #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)
5:15:34 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:15:34 PM #22 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
5:15:34 PM #23 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
5:15:34 PM #24 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:15:34 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
5:20:04 PM #26 SPTI -1114 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 40 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x190c00c0: Len x10000
0x09 00 02 00 68 00 00 00 76 31 76 00 40 00 00 00
0x58 12 D9 07 06 02 11 0F 1F 00 00 00 01 00 00 00
0x00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00
5:20:04 PM #27 CDR -1114 File Writer.cpp, Line 303
Reset occurred
E: TSSTcorp DVD+-RW TS-L632H
5:20:07 PM #28 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 63 (3Fh)
5:20:07 PM #29 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)
5:20:07 PM #30 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:20:11 PM #31 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
5:20:11 PM #32 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
I've been using Nero 7.10.1 for a few months and never had a problem up until last night.
I use Nero to burn DVD's.
I tried uninstalling and re installing the software but it still didn't work.
When I put in a blank DVD disc it lets me add files do everything normal up until the burning process.
It stays on 1% for about 5 minutes (?) then comes up with an error message.
I run Vista if that helps.
I've done an error log below. I don't understand a bit of it.
I've pasted it below
Windows XP 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder: <TSSTcorp DVD+-RW TS-L632H>Version: D400 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp DVD+-RW TS-L632H>Version: D400 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
TSSTcorp DVD+-RW TS-L632H E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1013MB (1037628kB)
Free physical memory: 322MB (329960kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.6.2009
UDF/ISO compilation
5:15:30 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:15:31 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started
5:15:31 PM #3 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)
5:15:31 PM #4 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:15:31 PM #5 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted
5:15:31 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
5:15:31 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
5:15:31 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
5:15:32 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2101951 (467:06.01, 4105MB)
5:15:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
5:15:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp DVD+-RW TS-L632H, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
5:15:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:15:32 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2101952 (2101952) = #2101952/467:6.2
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2101952 blocks [E: TSSTcorp DVD+-RW TS-L632H]
--------------------------------------------------------------
5:15:32 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp DVD+-RW TS-L632H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4304797696, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2101952 | 0 | 0x00
2101952 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
5:15:32 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
5:15:32 PM #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
5:15:32 PM #17 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
5:15:32 PM #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
5:15:32 PM #19 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
5:15:32 PM #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)
5:15:34 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:15:34 PM #22 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
5:15:34 PM #23 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
5:15:34 PM #24 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:15:34 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
5:20:04 PM #26 SPTI -1114 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 40 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x190c00c0: Len x10000
0x09 00 02 00 68 00 00 00 76 31 76 00 40 00 00 00
0x58 12 D9 07 06 02 11 0F 1F 00 00 00 01 00 00 00
0x00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00
5:20:04 PM #27 CDR -1114 File Writer.cpp, Line 303
Reset occurred
E: TSSTcorp DVD+-RW TS-L632H
5:20:07 PM #28 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 63 (3Fh)
5:20:07 PM #29 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)
5:20:07 PM #30 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:20:11 PM #31 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
5:20:11 PM #32 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon