Nero "Illegal Disc" error

[Kibs]

Hey guys

I recently did a complete format of my PC, but after reinstalling everything I'm suddenly getting the error mentioned in the title. I'm pretty sure it's because DMA is turned off, but I can't get it turned on. I've followed your guide on the subject but it hasn't helped.

I have 2 HDD's and 1 DVD drive. But since my MB only supports 2 IDE devices, I have my 2 HDD's connected via a PCI card, and my DVD drive on the MB itself. When I go to the Device Manager it shows 2 primary IDE channels and 2 secondary. All 4 says "not applicable" in the current transfer mode. Any ideas?

Here's one of my logs from Nero:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16-12-2003 19:18:06
Nero version: 6.3.1.6
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16 - HA 4 TA 0 - 6.3.1.6
Adapter driver: <JRAID> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <UC7509I SYT871E >Version: 1.0 - HA 6 TA 0 - 6.3.1.6
Adapter driver: <ahap09bb> HA 6

=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3500AG2.16 JRAID Port 4 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y080L0 YAR4 Pnp680r Port 5 ID 0 DMA: Off
DiskPeripheral : Hitachi HDT725025VLAT80 V5DO Pnp680r Port 5 ID 1 DMA: Off
CdRomPeripheral : UC7509I SYT871E 1.0 ahap09bb Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG D: CDRom0
UC7509I SYT871E F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 2047MB (2096172kB)
Free physical memory: 1363MB (1396728kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.7.2009
UDF/ISO compilation
19:13:48 #1 Phase 112 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation started

19:13:48 #2 Phase 114 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation completed (no file modified)

19:13:48 #3 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:13:48 #4 Phase 111 File dlgbrnst.cpp, Line 1841
DVD-Video files sorted

19:13:48 #5 Text 0 File Reader.cpp, Line 118
Reader running

19:13:48 #6 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

19:13:48 #7 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

19:13:48 #8 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media

19:13:48 #9 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2294287 (509:50.37, 4481MB)

19:13:48 #10 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

19:13:48 #11 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

19:13:48 #12 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:13:48 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2294288 (2294288) = #2294288/509:50.38
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294288 blocks [_NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

19:13:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4698701824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2294288 | lead-out | 1 | 0x00 | 0x41

19:13:48 #15 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

19:13:48 #16 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

19:13:48 #17 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

19:13:48 #18 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 2.4x (3.312 KB/s)

19:13:48 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:13:48 #20 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 23:38,708 (1418708ms) -> OK

19:13:48 #21 Text 0 File DVDR.cpp, Line 1619
Recording mode: Sequential Recording Mode

19:13:48 #22 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON

19:13:48 #23 Text 0 File DVDR.cpp, Line 1760
Start write address at LBA 0
DVD high compatibility mode: Yes

19:13:48 #24 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:13:48 #25 SCSI -1046 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 4, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x23 0x02 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

19:13:48 #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1607
Illegal disc

19:13:48 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1607
Could not perform start of Disc-at-once

19:13:48 #28 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

19:13:48 #29 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 2.4x (3.312 KB/s)


Existing drivers:
File 'Drivers\jraid.sys': Ver=1.17.14.03 built by: WinDDK, size=46208 bytes, created 24-03-2007 13:20:24 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Chewy]

Where did the jraid driver come from? What Mobo do you have?

Something is wrong there?

[Kibs]

I've got a Asus P5K, and I haven't installed any other drivers the the ones from the CD that came with the Mobo. Or... hmm... maybe it's a driver for the PCI card to which my 2 HDDs are connected? Dunno really. But I cant find the original drivers for the card so I had Windows find some automatically.

[Chewy]

http://support.asus.com/repair/repair.aspx?root=110&SLanguage=en-us

It's the jmicron controller but what is the exact model number of the Mobo?

[Kibs]

Maybe I'm misunderstanding you because english isnt my native language. I've looked at the mobo and it just says P5K. I know there are P5K deluxe versions and so on, but I just have the standard version.

[Chewy]

You might set the jmicro mode to ide in bios

[Chewy]

http://www.jmicron.com/Driver.htm

this is a mess tho

[Kibs]

I have now downloaded and installed the new drivers and made sure that it's in IDE mode in the bios, but it still hasn't helped:-/

[Kibs]

Turns out it's my burner that's shot. Tried putting it in my mates PC and it didn't work, but his burner worked in mine.

Thanks for the help anyway Chewy