Nero 7 burn appears to be good, but verify fails -- Please Help! (log included)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JonWestcot
    Junior Member
    Junior Member
    • Jan 2010
    • 1

    Nero 7 burn appears to be good, but verify fails -- Please Help! (log included)

    Hi all:

    I've been using Nero 7 Ultra for several years now and have never had the kind of problem I've been having lately.

    Almost every time I burn a DVD, the burn process seems to be good, but the verification process fails. It always fails with the same range, too. And, what's stranger still is that the failure occurs with two different burners with the exact same range!

    Both burners are "identical"; that is, they're both Pioneer DVR-1910LS (which I'm told is the same as the Pioneer DVR-113NP, which is what shows up in the log, and that both of these are really rebranded ASUS 2014L1T drives), and are approximately six or seven months old. I'm running Windows XP Home, SP3. The DVD blanks I'm using are from HP, and are labeled "dvd+r 16x 4.7GB / 120min." I've been using these successfully for over a year, up until this recent issue (which began, by the way, about 3 months ago).

    ANY help you can shed on this issue would be greatly appreciated! I look forward to hearing from you soon.

    Sincerely,

    Jon

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Windows XP 5.1
    IA32
    WinAspi: -
    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <PIONEER DVR-113NP> Version: 1.01 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: 
    CD-ROM: <PIONEER DVR-113NP >Version: 1.01 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD3200AAJB-00TYA0 00.0 pnp680 Port 0 ID 0 DMA: Off
    DiskPeripheral : WDC WD2000JB-00EVA0 15.0 pnp680 Port 0 ID 1 DMA: Off
    DiskPeripheral : WDC WD1600AAJB-00PVA0 00.0 pnp680 Port 0 ID 0 DMA: Off
    DiskPeripheral : WDC WD800BB-32CCB0 22.0 pnp680 Port 0 ID 1 DMA: Off
    DiskPeripheral : WDC WD400JB-00JJA0 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVR-113NP atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVR-113NP atapi Port 2 ID 0 DMA: On
    DiskPeripheral : WDC AC516800 atapi Port 2 ID 1 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
    === CDRom-Device-Map ===
    PIONEER DVR-113NP G: CDRom0
    PIONEER DVR-113NP H: CDRom1
    AXV CD/DVD-ROM Y: CDRom2
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523696kB)
    Free physical memory: 11MB (11408kB)
    Memory in use : 97 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    11.1.2010
    ISO compilation
    12:54:53 AM #1 Text 0 File Isodoc.cpp, Line 6410
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:54:54 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    12:54:54 AM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    12:54:54 AM #4 Text 0 File Writer.cpp, Line 113
    Writer G: PIONEER DVR-113NP running

    12:54:54 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    12:54:54 AM #6 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    12:54:54 AM #7 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2151103 (478:01.28, 4201MB)

    12:54:54 AM #8 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    12:54:54 AM #9 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: PIONEER DVR-113NP, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    12:54:54 AM #10 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:54:54 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2151104 (2151104) = #2151104/478:1.29
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2151104 blocks [G: PIONEER DVR-113NP]
    --------------------------------------------------------------

    12:54:54 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [G: PIONEER DVR-113NP] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4405460992, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2151104 | lead-out | 1 | 0x41 | 0x00

    12:54:54 AM #13 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    12:54:57 AM #14 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    12:54:58 AM #15 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    12:54:58 AM #16 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    12:54:58 AM #17 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 16x (22,160 KB/s)

    12:54:59 AM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
    Buffer x04903000: Len x4000

    12:54:59 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:55:00 AM #20 Text 0 File Cdrdrv.cpp, Line 8385
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: M01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
    23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
    01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

    12:55:00 AM #21 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:10:07 AM #22 Text 0 File WriterStatus.cpp, Line 116
    <G: PIONEER DVR-113NP> start writing Lead-Out at LBA 2151104 (20D2C0h), length 0 blocks

    1:10:08 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:10:42 AM #24 Phase 37 File dlgbrnst.cpp, Line 1724
    Burn process completed successfully at 16x (22,160 KB/s)

    1:10:43 AM #25 Phase 78 File dlgbrnst.cpp, Line 1724
    Data verification started

    1:16:18 AM #26 SPTI -1093 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 00 00 14 CC C0 00 00 10 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 02
    Buffer x0493a200: Len x8000

    1:19:44 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:19:45 AM #28 SectorVerify 20 File Cdrdrv.cpp, Line 9505
    Read errors from sector 1363136 to 1363151

    1:19:47 AM #29 Phase 81 File dlgbrnst.cpp, Line 1724
    Data verification failed

    Existing drivers:
    File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/7/2005 3:42:56 PM (InCD4 driver for win NT/2K/XP)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Working...