Tweet
FAQ: How to find out your media ID code and firmware version
Many issues concerning DVD copying have to do with the media you use and your firmware version.
Here's a super easy way of determining both in one step.
1. Pop a blank disk in your DVD writer
2. Open ImgBurn and go to Write mode
ImgBurn will show you all you need (see the following diagram for an example)
In this case, the media is a +R disc, its ID is (Verbatim) MCC-003-00 and my burner is an TSST Corp (Samsung) SH-S203B with firmware version SB04 on a SATA (RAID) controller.
Simple, isn't it?
Now, when folks on the forums ask for this info, it's only a second away.
Regards
Many issues concerning DVD copying have to do with the media you use and your firmware version.
Here's a super easy way of determining both in one step.
1. Pop a blank disk in your DVD writer
2. Open ImgBurn and go to Write mode
ImgBurn will show you all you need (see the following diagram for an example)
In this case, the media is a +R disc, its ID is (Verbatim) MCC-003-00 and my burner is an TSST Corp (Samsung) SH-S203B with firmware version SB04 on a SATA (RAID) controller.
Simple, isn't it?
Now, when folks on the forums ask for this info, it's only a second away.
Regards
Comment