I baught a computer and i need a upgrade on firmware and i'm not sure how i figure out the brand of my drive thats currently in there and were to find the upgarde.... I looked at properties and i saw: DVDRW IDE 1008 if that means anything.... Anyone know if thats it or how to find it and where i can get the upgrade?
Firmware upgrde
Collapse
X
-
i think i got the right one but when i tey to burn on nero (Happened before the upgrade too) this error file is created:
Customer
Fry's Electronics
xxxx-xxxx-xxxx-xxxx-xxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.15 (Nero Express)
Recorder: <DVDRW IDE1008> Version: 0054 - HA 1 TA 0 - 6.3.1.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE1008 >Version: 0054 - HA 1 TA 0 - 6.3.1.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI CD-ROM 52XMax atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW IDE1008 D: CDRom0
ATAPI CD-ROM 52XMax E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 567MB (581016kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.6.2004
UDF/ISO compilation
3:59:03 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
3:59:03 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
3:59:03 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
3:59:03 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
3:59:03 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
3:59:03 PM #6 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE1008 running
3:59:03 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
3:59:03 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
3:59:03 PM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using DVD media
3:59:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2111567 (469:14.17, 4124MB)
3:59:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
3:59:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: DVDRW IDE1008, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
3:59:27 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
3:59:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2111568 (2111568) = #2111568/469:14.18
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2111568 blocks [DVDRW IDE1008 ]
--------------------------------------------------------------
3:59:27 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [DVDRW IDE1008 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4324491264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2111568 | lead-out | 1 | 0x00 | 0x41
3:59:27 PM #16 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
3:59:27 PM #17 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.
3:59:27 PM #18 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
3:59:27 PM #19 Phase 28 File dlgbrnst.cpp, Line 1845
Speed measurement started
3:59:27 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:01:27 PM #21 Text 0 File WriterStatus.cpp, Line 115
<DVDRW IDE1008 > start writing Lead-Out at LBA 2111568 (203850h), lenght 0 blocks
4:01:27 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:01:27 PM #23 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
4:01:27 PM #24 Phase 29 File dlgbrnst.cpp, Line 1796
Speed measurement completed: 26x (36,012 KB/s)
4:01:27 PM #25 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 4x (5,540 KB/s)
4:01:27 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:01:27 PM #27 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: F01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 43 4D 43 20 4D - 41 47 00 46 30 31 00 38 ...CMC.MAG.F01.8
23 54 37 10 02 48 71 02 - 8C 69 16 16 0B 0B 0A 0A #T7..Hq..i......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
4:02:32 PM #28 SCSI -1196 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x034C6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02
4:02:32 PM #29 SCSI -1196 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x034C6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0x52 0x01 0x00 0x00 0x00 0xFF 0x00 0x00 0x1C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02
4:02:32 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 13:14,654 (794654ms) -> OK
4:02:32 PM #31 Text 0 File DVDPlusRW.cpp, Line 607
Start write address at LBA 0
DVD high compatibility mode: Yes
4:02:32 PM #32 CDR -1196 File ThreadedTransferInterface.cpp, Line 1613
Disc not present - tray open
4:02:32 PM #33 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1613
Could not perform start of Disc-at-once
4:02:32 PM #34 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
4:02:32 PM #35 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 5/24/2004 1:57:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 5/24/2004 1:57:52 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 5/24/2004 1:59:24 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
and i don't know if this is abnormal or not for whats rong... when its starting to burn onto the disc the drive opens up, closes, opens, closes and then it says cannot burn and gets that error ithat is above.Comment
Comment