SolveigMM Products - Info and Updates

[Dmitry Vergeles]

SolveigMM AVI Trimmer update 1.6.804.17

Fixes:
- Bug fixed. Audio distortion after trimming. Format MPEG-2 Layer-2

http://www.solveigmm.com/files/SolveigMM_AVI_Trimmer_1_6.zip

[Dmitry Vergeles]

Version 2.1.808.21 Update. Release Date: August 21, 2008

Version 2.1.808.21 Update. Release Date: August 21, 2008
Fixes:
- Fixed a bug with MPEG-2 files aspect ration changes. After MPEG-2 files
editing aspect ratio could be changed.

http://www.solveigmm.com/?Products&id=VideoSplitter

[Dmitry Vergeles]

Version 2.1.810.30 Update.

Version 2.1.810.30 Update. Release Date: October 30, 2008

http://www.solveigmm.com/?Products&id=VideoSplitter

Fixes:
- Inaccurate editing of DVD VOB files. End positions of fragments set to be kept in output mismatched with set positions. Up to 10 frames in each fragment could be more than required
- Fixed problem - if to open MPEG-2 with LPCM audio and try to edit that, the Splitter generated error - "Connecting additional trimmer pin with Muxer has been filed. hr = 0x80040207"
- Video screen did not redraw while dragging or maximizing the main window
- Fixed a crash arisen while trimming some AVI files with MP3 audio
- Fixed navigation problem - when you navigate slider cursor between markers by TAB and then try to seek to one frame left/right, a current marker was navigated instead of a slider cursor
- Fixed bug - when one tried to open SSP or XTL project with reference to index file(MLMIX) for MPEG-2 files > 4GB, splitter delivered message - "Source file is not supported or damaged"
- Clip Scr file in SSP or XTL project showed incorrectly (e.g. if it was "C:\temp\file.vob" it showed "C:\temp\.\file.vob")
- If there was turned on - "Obey Sample Times" feature - obey_sample_times="1" flag was written twice to XTL or SSP that caused error in attempt to open such XTL or SSP file
- LPCM audio in MPEG-2 wrong detection. The splitter showed Unknown audio type
- Fixed a false alarm of possible File rewriting. If you opened some SSP, and changed an output file name then if it even did not exist the Splitter generated the warning
- Fixed bug. If to open SSP file with set output file that can't be created and start processing, the Splitter fulfilled task but did not create an output. Now it generates an error

Changes:
- To improve usability added *.SSP file filter on Open Media File dialog
- Starting, "Time Calculator" now shows the difference between two nearest markers relatively the slide cursor position
- If opening SSP file the Splitter does not find Clip Scar file (e.g. it was moved to other folder) it asks a user to specify it rather then error deliver

[Dmitry Vergeles]

SolveigMM Video Spliter 2.1.901.23 Update

Version 2.1.901.23 Update. Release Date: January 31, 2009

http://www.solveigmm.com/?Products&id=VideoSplitter

Features:
-"Save All Segments" feature, that saves all the fragments on timeline to separate files
- Added enumeration prefix to output file names. e.g input_0001.avi, input_0002.avi
- Added "Add Task to Batch" item to Timeline context menu

Fixes:
-Eating to big amount of memory and 99% hanging during big MPEG-2 files editing
-Indexation of big MPEG-2 files sometime ended up with 99% progress hang
-Crash during some AVIs with PCM audio trimming
-Hang during attempt to open some other than XTL file as task list file (.xtl)
-Command line util trimming results were unstable if edit big files > than 10 GB

Changes:
- Byte size now is showed in GB/MB/KB format instead of Bytes

[Dmitry Vergeles]

SolveigMM and Hyperionics announce HyperCam 2 to 3 upgrade program

Press release: Upgrade HyperCam 2.x to HyperCam 3.x only for 50%

HyperCam 3.0 is powerful screen capturing software that is compatible with Windows Vista, XP, 2000 and Windows 7.

[Dmitry Vergeles]

HyperCam 3.1 pre-beta: WMV/ASF output, portable intsallation, ...

Hello All,

We have uploaded pre-beta of HyperCam 3.1 version.
New features are:

1 - Ability to use Microsoft Sceen codec and write WMV files with further editing
2 - Ability to use some other third party codecs to be pre-setup at PC like MPEG-2, ACV/H264, etc. and put them to ASF files.
3 - Ability to install portable version that you can write to CD/USB stick, and consume in different PC's without additional installation
4 - Russian interface is available. German is coming.

All the bugs, wishes or advices you can post either here or write us though web-site

http://www.solveigmm.com/?Support&id=Feedback

The intsallation is available at the link below:

http://www.solveigmm.com/files/SolveigMM_HyperCam_3_1_beta.zip

The online HyperCam guideline:

http://www.solveigmm.com/HowTo/HyperCam-3-Tutorial

Thank you for attention

[Dmitry Vergeles]

SolveigMM Video Splitter 2.3.1010.25 Beta is available for testing

implemented Frame accuracy editiong of AVI/ASF/WMV files

instructions - AVI frame accuracy trimming. Testing

You can download the updated beta from here:

http://solveigmm.com/files/SolveigMM_Video_Splitter_2_3_beta.zip

The installer version is 2.3.1010.25 Beta

Fixes:
- audio/video synchronization lost in files with long GOP length in AVI and ASF/WMV files.
- invalid output video while cutting some ASF/WMV file with frame accuracy.
- second fragment in some cases was invalid or absent in output file after trimming.
- added logging system.

[Dmitry Vergeles]

HyperCam 3 Hits Japanese Market

SolveigMM partners with Yanasa Software to launch screencasting utility in the Japanese market

November 2, 2010. Solveig Multimedia today announces the start of the partnership with Yanasa Software (Japanese reseller company) to bring fully localized HyperCam 3.0 to Japanese consumers. The advanced screencasting software now also comes with customer support in Japanese.

Full press release:

http://www.solveigmm.com/Press/HyperCam-3-Hits-Japanese-Market

[Dmitry Vergeles]

SolveigMM Video Splitter 2.3 Release - Support MPEG-1, WAV, other features

SolveigMM Video Splitter 2.3 has finally been released.


Among new features - support for MPEG-1 and WAV files, the ability to save audio tracks from video files and other useful functions. You can find out more about SolveigMM Video Splitter 2.3 in the press release-
Video Editing Made Easy With SolveigMM Video Splitter 2.3

Other features:

Simplification of product registration process
Sound Volume control
WAV files support
MPEG-1 files support
Automatic check updates feature
Recent files menu
GOP accuracy trimming mode for MPEG-2
GOP accuracy trimming mode for MPEG-1
Logging feature
Save audio only from AVI, ASF, MPEG-2 PS/TS, MPEG-1 SYS files
Windows 7 Compatibility

A full changes description:

http://www.solveigmm.com/en/video-splitter-version-history/

15% Coupon for RegNow purchase - SOLV-90A4. Valid for 10 first licenses, within one week (till 7th April 2011). Have fun


Follow us on Twitter: https://twitter.com/SolveigMM
Join us on Facebook: http://www.facebook.com/pages/Solvei...07167942688451