Burn fails each time ... HELP!!!

[dj1drummer1]

i been burning dvd's for years. till about 3 weeks ago i am not able to anymore. it goes into nero and just fails after dvd shrink. here is the log


BRIAN

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
(Nero Express)
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120026AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PQ3224W DWV971N 1.0 dtscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 34MB (35768kB)
Memory in use : 93 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.2.2007
Burn DVD Image
3:55:32 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

3:55:32 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

3:55:32 PM #3 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVD+RW GCA-4040N running

3:55:32 PM #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

3:56:18 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286019 (508:00.19, 4464MB)

3:56:18 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

3:56:18 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: AML, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

3:56:18 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)

3:56:18 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286020 (2286020) = #2286020/508:0.20
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286020 blocks [D: HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------

3:56:18 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681768960, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286020 | lead-out | 1 | 0x41 | 0x00

3:56:18 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

3:56:18 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

3:56:18 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

3:56:18 PM #14 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.

3:56:18 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

3:56:18 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

3:56:18 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:56:18 PM #18 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: AML.....
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 41 4D 4C 00 00 - 00 00 00 30 30 32 00 38 ...AML.....002.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

3:56:18 PM #19 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 00 2B 52 54 42 00 00 04 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 14
Buffer x03b8ba00: Len x4
0x00 00 00 00

3:56:18 PM #20 Text 0 File DVDR.cpp, Line 5746
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -1

3:56:18 PM #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

3:56:47 PM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x04b30000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

3:56:47 PM #23 CDR -1135 File Writer.cpp, Line 302
Write error
D: HL-DT-ST DVD+RW GCA-4040N

3:56:47 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:56:48 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

3:56:48 PM #26 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders

3:56:49 PM #27 Phase 129 File dlgbrnst.cpp, Line 1730
Generating DVD borders completed successfully

3:56:49 PM #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/16/2003 2:23:54 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 2:00:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[shrink0]

[<hl-dt-st dvd+rw="" gca-4040n=""><ide><hl-dt-st dvd+rw="" gca-4040n=""><ide>
Physical memory : 510MB (523244kB)
Free physical memory: 34MB (35768kB)
Memory in use : 93 %

Free up some memory in use or install more!!!!!
<not specified="">
</not></ide></hl-dt-st></ide></hl-dt-st>

[ratboy]

Have you purchased new DVD's lately?

(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)

You may need to check this out:CLICK HERE

Read thru, it will most likely answer some questions.

[Chewy]

that aml is pretty bad media

and your drive must be real old, the new dell firmware is from 2004

http://forum.rpc1.org/dl_firmware.php?download_id=1931

[dj1drummer1]

the media is brand new and the drive is only from 05
i can burn on both of my burners i just cant burn dvds. it just fails. it just started doin this 3 weeks ago

[Chewy]

I moved your new post back into your original thread, please continue in this thread, it's too confusing to start a new one or post in someone elses

the media is brand new

irrelevant, still not a very good mid

http://www.videohelp.com/dvdmedia.php?dvdmediadvdridsearch=AML.....002%20

you have been given good advise now it's your turn to try a differnet blank or burner

at least update your firmware to C111

[healimonster]

I have the exact same drive and the exact same problem.

HL-DT-ST DVD-RW GWA-4040N

is there a solution?

[NightTran]

yes, read all of the above