First post- another video/audio sync problem

[+v|essence]

Hello.

I've been snoopin around the archives for a while trying to figure out how to solve my problem, but I am completely lost and don't know what to do. Before I tell you the specs, I was working with swordfish.avi that needed to be split, converted into svcd, and put on two cds. I made the first cd fine, and it must've been luck because I can't get the second part sync.

So here's what I'm working with:

-TMPGEnc Plus
-VirtualDub 1.5.1 build 15654
-Nero 5.5.9.0

Here is the file information I got out of VirtualDub for the avi:

http://members.shaw.ca/vietessence/fileinfo.jpg

Also VDub said it detected a VBR audio stream.

I'd appreciate the help for this popular problem.

[setarip]

Converting .AVIs with VBR-MP3 Audio for use with TMPGEnc

Simply use NanDub or VirtualDubMOD (Different than standard VirtualDub), to save the audio stream as an Uncompressed PCM (WAV) file as follows:
1) Load your original .AVI into NanDub

2)Set "Video" to "Direct Stream Copy"

3) Set "Audio" to "Full Processing Mode" (NanDub only -For VirtualDubMOD>"Streams>"Stream list">>rightclick on the listed audiostream and then select "Full Processing Mode")
From the "Audio" dropdown menu, select "Compression" and choose "No compression(PCM)" (NanDub only - For VirtualDubMOD>"Streams>"Stream list">>rightclick on the listed audiostream and then select "Compression" and choose "No compression(PCM)")

4) From the "File" dropdown menu, select "Save WAV" (In VIrtualDubMOD, "Save WAV" is located under the "Streams" drodpown menu) (Enter a new filename with a ".WAV" extender).Click on "OK"

5) Then save the .AVI as a silent .AVI (NanDub - set "Audio" to "No audio" after you've saved the WAV file. - For VirtualDubMOD>"Streams>"Stream list">>click on the listed audiostream and then select "Disable").

6) Open TMPGEnc and FIRST "drag and drop" the silent .AVI onto it, then do the same with the .WAV file.


Let us know of your success ;>}

[+v|essence]

ok so i saved the .wav with nandub, but its less than a meg in size and 5 seconds long, is that still ok?

[+v|essence]

ok so its not, why is that happening?

[setarip]

I don't know why that hasn't worked for you, but be that as it may, instead use VirtualDubMOD as follows:

1) Load the .AVI file into VirtualDubMOD (a different program than the standard VirtualDub)

2) From the "Video" dropdown menu, select "Direct Stream Copy"

3) From the "Streams" dropdown menu, select "Stream List" - and rightclick on the audio stream, then select "Full Processing Mode" - then click on "OK"

4) Save with a new filename

[+v|essence]

setarip, you are god.

[setarip]

"setarip, you are god."

My pleasure ;>}