Hi,my plextor px708A doesnt read/write any brand of CDs (reads Writes DVDs).can anybody help me?
Plextor PX 708A
Collapse
X
-
well firstly I would recommend a firmware update to the latest. This is assuming it hasnt got the latest 1.11
Find it here
Please update with no media in drive.
Please run the Pxinfo and post the log as a text attachment... I will look at it.
This log is a standard Information tool for further support with Plextor... Within europe (most Countries) Plextor Operates a 2 year warranty (not sure if this applies to your PX-708A model) But if it does they will send you a new drive via post and you will return the defective drive to them.
This of course is subject to filling out the RMA (Return Manufacturer Authorization) form.
But for now please perform the update as requested and post that log here please.
If possible please insert one of the CD media your trying to burn after the update and wilst you iniciate the log request. -
Right... Once you run the PXinfo you save the results into a log file then your on the manage attachtments on the forum (advanced) browsing for and uploading the log called SYSInfo which is a text file, right?
If this still gives you errors the just cut and paste the contents of that file....
Look at pics for more info...Attached FilesLast edited by Guest; 2 Dec 2005, 02:46 AM.Comment
-
neat tool, will use it here
just run the tool hit save
remember where it saved
open and click your mouse button and drag
to select the top part then right click copy
and paste(another right click) into reply here
mine:
Plextor Info Utility V1.24
Copyright (C) 1999-2004 Plextor SA/NV
01 December 2005
__________________________________________________ ___________________
Software Information
__________________________________________________ ___________________
Operating system : Windows XP V5.01.2600 Service Pack 2
ASPI (wnaspi32.dll) : n/a
Roxio ASPI (cdral.dll) : n/a
Ahead ASPI (wnaspi32.dll) : Win32 Nero Aspi Library V2.0.1.74 (not used by PXInfo)
__________________________________________________ ___________________
Hardware Information
__________________________________________________ ___________________
IDE Interface: 0 ID: - Maximum # Targets : -
Description :
Type :
Port Driver : atapi.sys
Provider :
Description : IDE/ATAPI Port Driver (Microsoft Corporation)
Location : C:\WINDOWS\system32\drivers\atapi.sys
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Date :
ID 0: TOSHIBA CDW/DVD SD-R1612 VTB02
-
__________________________________________________ ___________________
IDE Interface: 1 ID: - Maximum # Targets : -
Description :
Type :
Port Driver : atapi.sys
Provider :
Description : IDE/ATAPI Port Driver (Microsoft Corporation)
Location : C:\WINDOWS\system32\drivers\atapi.sys
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Date :
ID 0: HL-DT-ST DVDRAM GSA-4163B VAN16
-
__________________________________________________ ___________________
S-ATA Interface: 2 ID: - Maximum # Targets : -
Description :
Type :
Port Driver : viasraid.sys
Provider :
Description : VIA SATA RAID DRIVER FOR WINXP (VIA Technologies inc,.ltd)
Location : C:\WINDOWS\system32\drivers\viasraid.sys
Version : 5.1.2600.220
Date :
ID 0: ST312082 7AS V3.42
-
USB Device Information:
-----------------------
# Host Controller \\.\HCD0 found.
VIA Rev 5 or later USB Universal Host Controller
| |---> Port[1] = I/O device connected
# Host Controller \\.\HCD1 found.
VIA Rev 5 or later USB Universal Host Controller
| |---> Port[2] = I/O device connected
| | USB-PS/2 Optical Mouse
# Host Controller \\.\HCD2 found.
VIA Rev 5 or later USB Universal Host Controller
# Host Controller \\.\HCD3 found.
VIA Rev 5 or later USB Universal Host Controller
# Host Controller \\.\HCD4 found.
VIA USB Enhanced Host ControllerComment
-
PXinfo
Operating system : Windows XP V5.01.2600
ASPI (wnaspi32.dll) : n/a
Roxio ASPI (cdral.dll) : Roxio CDRAL DLL, V7.0.0.162 (not used by PXInfo)
Ahead ASPI (wnaspi32.dll) : n/a
__________________________________________________ ___________________
Hardware Information
__________________________________________________ ___________________
IDE Interface: 0 ID: - Maximum # Targets : -
Description :
Type :
Port Driver : atapi.sys
Provider :
Description : IDE/ATAPI Port Driver (Microsoft Corporation)
Location : C:\WINDOWS\System32\drivers\atapi.sys
Version : 5.1.2600.0 (XPClient.010817-1148)
Date :
ID 0: Maxtor 6 Y250P0 VYAR4
-
__________________________________________________ ___________________
IDE Interface: 1 ID: - Maximum # Targets : -
Description : Canal IDE secundário
Type : Controladores IDE ATA/ATAPI
Port Driver : atapi.sys
Provider :
Description : IDE/ATAPI Port Driver (Microsoft Corporation)
Location : C:\WINDOWS\System32\drivers\atapi.sys
Version : 5.1.2600.0 (XPClient.010817-1148)
Date :
ID 0 (D PLEXTOR DVDR PX-708A V1.11 (S/N:555704) (1.31.53C)
Drive Model: PX-708A
Read speed: 17-40 X CAV
Jumper Settings: 001
Buffer Underrun Proof disabled
PoweRec: enabled
Auto Insert Notification: yes
DMA: yes
-
ID 1: HL-DT-ST CD-RW GCE-8520B V1.00
-
USB Device Information:
-----------------------
# Host Controller \\.\HCD0 found.
SiS 7001 PCI para controlador de sistema anfitrião aberto de USB
# Host Controller \\.\HCD1 found.
SiS 7001 PCI para controlador de sistema anfitrião aberto de USB
# Host Controller \\.\HCD2 found.
SiS 7001 PCI para controlador de sistema anfitrião aberto de USB
| |---> Port[1] = I/O device connected
# Host Controller \\.\HCD3 found.
SiS 7002 USB 2.0 Enhanced Host Controller
__________________________________________________ ___________________Comment
-
Excelent....
Have you tried burning a cd after the firmaware update?
the only thing I can see straight out there is that ROXIO and NERO dont like each other very much...
Nero have a fix for the UDF control issue with Roxio but it is suppose to work (apparently) with INCD software...
You can try it by downloading it and giving it a go...
read about it here
ftp://ftp6.nero.com/RoxioUdfReaderControl.exe
I think ultimatly the best guess is to uninstall Roxio (puah!) and make sure all traces of it are gone.... But give that tool a go for me please...
Acho que es Portugues como eu....Last edited by Guest; 2 Dec 2005, 05:26 AM.Comment
-
Acho que o detalhes nao teen importancia... de qualquer maneira venhas daqui ou acola somos do mesmo sangue....
E pena que o teu HDD tenha qualquer falha... Eu acho que a conjuncao de Nero e Roxio teen a culpa na maioridade dos casos.... Isto nao quer dizer que eu esteja errado....
Pois tenta livrar-te do Roxio (so porque penso que o Nero seja o melhor dos dois) e diz qualquer coisa....
Um abraco extra grande para um Irmao...Last edited by Guest; 7 Dec 2005, 07:13 PM.Comment
-
Originally Posted by 201059Hi,my plextor px708A doesnt read/write any brand of CDs (reads Writes DVDs).can anybody help me?
If you have problems only with CD, then probably your CD laser is broken.
If the burner is still in warranty, you should return it to get a substitutionComment
-
If you decide to buy a new one because it is too expensive to post your faulty drive to Plextor I recommend the PX716a....
However meu Irmao I think you could still try Plextor and theire support you never know they may not require you to send in the faulty drive.... And you just pay for a new one?? making it way cheaper...
I would give it a try since I have no idea of how expensive it is to buy or post in comparison from Angola...
Um abracaoComment
Comment