DVD burning problems with Nero 6 Ultra / Recode 2

**Taelon** · 24 Sep 2005, 12:10 AM

Looking over the Nero Logs, nothing jumps out at me. Could be a bad batch of media, Melody? sorry never heard of it. Check the Media code on a burnt disk against this list at videohelp.

Occasionally even the best quality media will be a bad one that slipped past QC. Look at the blanks and see if you can see any irregularity in the same area. Try some different media and see if you encounter the same type of error.

**vw56german** · 29 Sep 2005, 05:29 AM

I know it says DVD-r for the media but this line confuses me:

23:36:40 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

9215Mb?? is Nero set to DVD9 instead of DVD5?

**King1** · 3 Oct 2005, 02:33 AM

nero 6 Overburning error

using nero 6 ultra edition,cant overburn DVD-R ( says "burn failed" but the disk doesnt become useless, normal burning works perfectly on same disk) , I CAN OVERBURN dvd+rw ,but with last track corrupted,i have set the overburning option on in nero.i have installed the latest firmware for dvd drive (sony dru720a). i have attached the log file. plz help

Nero Serial Removed
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <SONY DRU-720A RW DVD>Version: JY06 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <ATAPI>HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DRU-720A RW DVD>Version: JY06 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <ATAPI>HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-720A F: CDRom3
NERO IMAGEDRIVE2 G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 238MB (244456kB)
Free physical memory: 76MB (78292kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.10.2005
ISO compilation
9:36:23 PM #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:36:23 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

9:36:23 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9:36:23 PM #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

9:36:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2355199 (523:22.49, 4599MB), real: 4489MB
Last address to be written: 2301103 (511:21.28, 4494MB)

9:36:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: YES (enabled: CD DVD)

9:36:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: SONY DVD RW DRU-720A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

9:36:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

9:36:25 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2301104 (2301104) = #2301104/511:21.29
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2301104 blocks [SONY DVD RW DRU-720A]
--------------------------------------------------------------

9:36:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4712660992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2301104 | lead-out | 1 | 0x41 | 0x00

9:36:26 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

9:36:26 PM #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

9:36:26 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

9:36:26 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

9:36:26 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:36:26 PM #16 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

9:36:26 PM #17 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

9:36:26 PM #18 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

9:36:26 PM #19 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:36:26 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x23 0x1C 0xB0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

9:36:26 PM #21 Text 0 File DVDR.cpp, Line 5317
Drive: SONY DVD RW DRU-720A
Book Type request [LO]: DVD-ROM
Book Type setting not supported for the loaded disc type

9:36:26 PM #22 CDR -1066 File ThreadedTransferInterface.cpp, Line 1765
Invalid field in command

9:36:26 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765
Could not perform start of Disc-at-once

9:36:26 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.53a, size=17136 bytes, created 6/3/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Taelon** · 3 Oct 2005, 07:00 AM

Originally Posted by King1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off

Turn OFF imagedrive, it could cause problems trying to communicate with the burner.<sony dru-720a="" rw="" dvd=""><atapi><sony dru-720a="" rw="" dvd=""><atapi>

</atapi></sony></atapi></sony>

<sony dru-720a="" rw="" dvd=""><atapi><sony dru-720a="" rw="" dvd=""><atapi>9:36:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2355199 (523:22.49, 4599MB), real: 4489MB
Last address to be written: 2301103 (511:21.28, 4494MB)</atapi></sony></atapi></sony>

<sony dru-720a="" rw="" dvd=""><atapi><sony dru-720a="" rw="" dvd=""><atapi>Don't overburn DVDs!

9:36:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: SONY DVD RW DRU-720A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

9:36:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)</atapi></sony></atapi></sony>

See above.

<sony dru-720a="" rw="" dvd=""><atapi><sony dru-720a="" rw="" dvd=""><atapi> <not specified="">Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:36:26 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x23 0x1C 0xB0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00 </not></atapi></sony></atapi></sony>

You need to reflash the firmware on your drive and/or try different media. Your drive is not recognizing the medai.

**LT. Columbo** · 3 Oct 2005, 03:09 PM

taelon

"Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:36:26 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x23 0x1C 0xB0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

You need to reflash the firmware on your drive and/or try different media. Your drive is not recognizing the medai."

this seems to be the case with -r media. i believe this to be normal, see what i mean

"Disc Manufacturer: MCC 02 - RG20 "

**Taelon** · 3 Oct 2005, 10:31 PM

Originally Posted by LT. Columbo

"this seems to be the case with -r media. i believe this to be normal, see what i mean

"Disc Manufacturer: MCC 02 - RG20 "

You're right LT. I should have looked at it closer, I was just called on this @doom9 when I said "DVD-R doesn't show MID's on blanks like DVD+Rs do. It will only show it after the burn on DVD-Rs." But it turns out I was right there, and you're right here

Anyway, I now have some more info on the Nero Error codes;

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST); Indicates that there was an illegal parameter in the command descriptor block or in the additional parameters supplied as data for some commands (FORMAT UNIT, SEARCH DATA, etc.).

Sense Code: 0x24 = INVALID FIELD IN CDB

CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x23 0x1C 0xB0 0x00 0x00 0x00

I still don't know exactly what this is telling us yet.

**LT. Columbo** · 4 Oct 2005, 04:03 AM

yeah taelon, i'd like to have nero's tech support explain why this is the case, maybe i will, as frustrating as it is dealing with them

**tonyboy9** · 6 Oct 2005, 03:55 AM

Trying to create video DVD from Hi8 tape in my SONY Handycam

I have Nero 6 Ultra Edition. When I bring up the Nero Start Smart menu, which link do I use? I hooked up the video camera to the computer USB port, but I can't get any of the DVD or CD/DVD links in Start Smart to work. Any help is greatly appreciated.

Tony

DVD burning problems with Nero 6 Ultra / Recode 2

DVD burning problems with Nero 6 Ultra / Recode 2

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment