Adding multiple titles/movies to 1 DVD using Nero Recode 2

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • jmet
    Super Moderator
    • Nov 2002
    • 8697

    Adding multiple titles/movies to 1 DVD using Nero Recode 2

    <img src=http://www.digital-digest.com/~jmet/nr_2_or_more_dvds/nero_recode2.jpg>

    Software you will need:

    <ol><li>Nero Recode 2</ol>

    <hr>

    Possible uses for this guide:

    <ol><li>Adding 2 or more DVD's to 1 DVD-R or DVD+R<li>Joining a double sided DVD (meaning you have to take the disc out and flip it over to watch the rest) to a single sided DVD-R or DVD+R<li>Taking 2 different movies & creating 1 DVD out of them</ol>

    <hr>

    Assuming you have already ripped the DVD's to your hard drive in "File" mode, you would then follow this guide to add multiple movies to just one DVD.

    I am using "Saw 1" and "Saw 2" DVD's for this guide. These are not the original DVD's though, they are main movie only backups which usually have no compression used on the main movie. That is what I recommend you doing instead of taking 2 main movie titles from "Full Disc" backups.

    <hr>

    Go ahead and start up Nero Recode 2 and click "Remake a DVD" (red). (Screen Shot Below)

    <img src=http://www.digital-digest.com/~jmet/nr_2_or_more_dvds/nr_2_or_more_dvds1-1.jpg>

    <hr>

    Now on this screen, click the "Import Titles" button (blue). After clicking the "Import Titles" button, the "Import Title" screen will pop up (green). Here is where you need to find the first folder (DVD) you wish to add. For this guide it was "Saw 1". Go ahead and double click the folder you want, it was "Saw 1" folder for me. Nero Recode might do a quick analysis of the movie to see if it needs any compression etc. After it gets done, click the "Main Title" (yellow) and then click the "Add Title" button at the bottom (purple) (Screen Shot Below)

    <img src=http://www.digital-digest.com/~jmet/nr_2_or_more_dvds/nr_2_or_more_dvds1-2.jpg>
    Last edited by jmet; 15 Feb 2006, 04:10 PM.
  • jmet
    Super Moderator
    • Nov 2002
    • 8697

    #2
    Adding multiple titles/movies to 1 DVD using Nero Recode 2

    Now repeat the same procedure you did above for every title/movie you wish to add to the final DVD. For me it was "Saw 2" (red). When you get finished adding each title you want, click the "Close" button at the bottom (blue). (Screen Shot Below)

    <img src="http://www.digital-digest.com/~jmet/nr_2_or_more_dvds/nr_2_or_more_dvds3.jpg">

    <hr>

    For heavy compression reasons, make sure you take the check mark out of the box for each audio stream you don't want (green) and also do the same for Subtitles (purple). ( I only keep 1 audio stream to begin with so thats why there is only 1 audio stream to begin with. I highly recommend keeping just 1 audio stream and 1 subtitle so that you aren't using heavy compression.) (Screen Shot Below)

    <img src="http://www.digital-digest.com/~jmet/nr_2_or_more_dvds/nr_2_or_more_dvds4.jpg">
    Last edited by jmet; 15 Feb 2006, 05:20 PM.

    Comment

    • jmet
      Super Moderator
      • Nov 2002
      • 8697

      #3
      Adding multiple titles/movies to 1 DVD using Nero Recode 2

      For compression reasons and playback reasons, I also suggest you use the "Start/End" button (red) to edit out unnecessary video frames (blackness, credits, cast, etc.). Go ahead and click the "Start/End" button, then this screen will pop up. Use the "Fast Forward" (yellow) and "Rewind" (blue) buttons to set which frame is the starting frame (green) and which frame is the ending frame (purple). I recommend you cut out the intro and the credits so that you will use less compression and have better playback quality. <font color=red><b>You will need to do this for each title in the compilation!</b></font> Click the OK button (black) at the bottom when you are finished then click the "Next" button (light blue). (Screen Shot Below)

      <img src="http://www.digital-digest.com/~jmet/nr_2_or_more_dvds/nr_2_or_more_dvds5.jpg">

      <hr>

      After clicking the "Next" button, you will be presented with this screen. Here you would need to select how you want Nero Recode 2 to output the files. You can pick either "Hard Disk Folder" where Recode would create full DVD structure including .bup, .ifo, and .vob files (red). You also can pick a DVD burner of your choice where Recode would go ahead and burn it for you after it encodes (blue). I highly recommend putting a check mark in both boxes at the bottom, as more than likely you are using heavy compression (green). (Screen Shot Below)

      <img src="http://www.digital-digest.com/~jmet/nr_2_or_more_dvds/nr_2_or_more_dvds6.jpg">

      <hr>

      DONE! Enjoy your multi title/movie DVD!
      Last edited by jmet; 15 Feb 2006, 05:20 PM.

      Comment

      • lovelywaz
        Junior Member
        Junior Member
        • Mar 2004
        • 12

        #4
        Thanks for this guide, I havn't try but was thinking to join 2 movies together. Will follow this and if I need any extra info maybe I will bother you in this thread

        Comment

        • Vinayvaz
          Junior Member
          Junior Member
          • Mar 2006
          • 3

          #5
          how to create main menu(root menu) for this

          Comment

          • Ken A
            Junior Member
            Junior Member
            • Jun 2006
            • 8

            #6
            How would I put multiple avi files on one DVD using this tool ??

            Comment

            Working...